mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
029093a302
This target has full device tree support, thus reducing the number of patches needed for bcm63xx, in which there's a patch for every board. The intention is to start with a minimal amount of downstream patches and start upstreaming all of them. Current status: - Enabling EHCI/OHCI on BCM6358 causes a kernel panic. - BCM63268 lacks Timer Clocks/Reset support. - No PCI/PCIe drivers. - No ethernet drivers. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
476 lines
9.1 KiB
Plaintext
476 lines
9.1 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/clock/bcm6368-clock.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/interrupt-controller/bcm6368-interrupt-controller.h>
|
|
#include <dt-bindings/reset/bcm6368-reset.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "brcm,bcm6368";
|
|
|
|
aliases {
|
|
nflash = &nflash;
|
|
pflash = &pflash;
|
|
pinctrl = &pinctrl;
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
spi0 = &lsspi;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,115200n8 earlycon";
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
clocks {
|
|
periph_osc: periph-osc {
|
|
compatible = "fixed-clock";
|
|
|
|
#clock-cells = <0>;
|
|
|
|
clock-frequency = <50000000>;
|
|
clock-output-names = "periph";
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
mips-hpt-frequency = <200000000>;
|
|
|
|
cpu@0 {
|
|
compatible = "brcm,bmips4350", "mips,mips4Kc";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
};
|
|
|
|
cpu@1 {
|
|
compatible = "brcm,bmips4350", "mips,mips4Kc";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
cpu_intc: interrupt-controller {
|
|
#address-cells = <0>;
|
|
compatible = "mti,cpu-interrupt-controller";
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0 0>;
|
|
};
|
|
|
|
ubus {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
compatible = "simple-bus";
|
|
ranges;
|
|
|
|
periph_clk: clock-controller@10000004 {
|
|
compatible = "brcm,bcm6368-clocks";
|
|
reg = <0x10000004 0x4>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
pll_cntl: syscon@10000008 {
|
|
compatible = "syscon";
|
|
reg = <0x10000008 0x4>;
|
|
native-endian;
|
|
};
|
|
|
|
syscon-reboot {
|
|
compatible = "syscon-reboot";
|
|
regmap = <&pll_cntl>;
|
|
offset = <0x0>;
|
|
mask = <0x1>;
|
|
};
|
|
|
|
periph_rst: reset-controller@10000010 {
|
|
compatible = "brcm,bcm6345-reset";
|
|
reg = <0x10000010 0x4>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
ext_intc0: interrupt-controller@10000018 {
|
|
#address-cells = <1>;
|
|
compatible = "brcm,bcm6345-ext-intc";
|
|
reg = <0x10000018 0x4>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
interrupts = <BCM6368_IRQ_EXT0>,
|
|
<BCM6368_IRQ_EXT1>,
|
|
<BCM6368_IRQ_EXT2>,
|
|
<BCM6368_IRQ_EXT3>;
|
|
};
|
|
|
|
ext_intc1: interrupt-controller@1000001c {
|
|
#address-cells = <1>;
|
|
compatible = "brcm,bcm6345-ext-intc";
|
|
reg = <0x1000001c 0x4>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
interrupts = <BCM6368_IRQ_EXT4>,
|
|
<BCM6368_IRQ_EXT5>;
|
|
};
|
|
|
|
periph_intc: interrupt-controller@10000020 {
|
|
#address-cells = <1>;
|
|
compatible = "brcm,bcm6345-l1-intc";
|
|
reg = <0x10000020 0x10>,
|
|
<0x10000030 0x10>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
interrupt-parent = <&cpu_intc>;
|
|
interrupts = <2>, <3>;
|
|
};
|
|
|
|
wdt: watchdog@1000005c {
|
|
compatible = "brcm,bcm7038-wdt";
|
|
reg = <0x1000005c 0xc>;
|
|
|
|
clocks = <&periph_osc>;
|
|
|
|
timeout-sec = <30>;
|
|
};
|
|
|
|
pinctrl: pin-controller@10000080 {
|
|
compatible = "brcm,bcm6368-pinctrl";
|
|
reg = <0x10000080 0x8>,
|
|
<0x10000088 0x8>,
|
|
<0x10000098 0x4>;
|
|
reg-names = "dirout", "dat", "mode";
|
|
brcm,gpiobasemode = <&gpiobasemode>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupts-extended = <&ext_intc1 0 0>,
|
|
<&ext_intc1 1 0>,
|
|
<&ext_intc0 0 0>,
|
|
<&ext_intc0 1 0>,
|
|
<&ext_intc0 2 0>,
|
|
<&ext_intc0 3 0>;
|
|
interrupt-names = "gpio32", "gpio33", "gpio34", "gpio35",
|
|
"gpio36", "gpio37";
|
|
|
|
pinctrl_analog_afe_0: analog_afe_0 {
|
|
function = "analog_afe_0";
|
|
pins = "gpio0";
|
|
};
|
|
|
|
pinctrl_analog_afe_1: analog_afe_1 {
|
|
function = "analog_afe_1";
|
|
pins = "gpio1";
|
|
};
|
|
|
|
pinctrl_sys_irq: sys_irq {
|
|
function = "sys_irq";
|
|
pins = "gpio2";
|
|
};
|
|
|
|
pinctrl_serial_led: serial_led {
|
|
pinctrl_serial_led_data: serial_led_data {
|
|
function = "serial_led_data";
|
|
pins = "gpio3";
|
|
};
|
|
|
|
pinctrl_serial_led_clk: serial_led_clk {
|
|
function = "serial_led_clk";
|
|
pins = "gpio4";
|
|
};
|
|
};
|
|
|
|
pinctrl_inet_led: inet_led {
|
|
function = "inet_led";
|
|
pins = "gpio5";
|
|
};
|
|
|
|
pinctrl_ephy0_led: ephy0_led {
|
|
function = "ephy0_led";
|
|
pins = "gpio6";
|
|
};
|
|
|
|
pinctrl_ephy1_led: ephy1_led {
|
|
function = "ephy1_led";
|
|
pins = "gpio7";
|
|
};
|
|
|
|
pinctrl_ephy2_led: ephy2_led {
|
|
function = "ephy2_led";
|
|
pins = "gpio8";
|
|
};
|
|
|
|
pinctrl_ephy3_led: ephy3_led {
|
|
function = "ephy3_led";
|
|
pins = "gpio9";
|
|
};
|
|
|
|
pinctrl_robosw_led_data: robosw_led_data {
|
|
function = "robosw_led_data";
|
|
pins = "gpio10";
|
|
};
|
|
|
|
pinctrl_robosw_led_clk: robosw_led_clk {
|
|
function = "robosw_led_clk";
|
|
pins = "gpio11";
|
|
};
|
|
|
|
pinctrl_robosw_led0: robosw_led0 {
|
|
function = "robosw_led0";
|
|
pins = "gpio12";
|
|
};
|
|
|
|
pinctrl_robosw_led1: robosw_led1 {
|
|
function = "robosw_led1";
|
|
pins = "gpio13";
|
|
};
|
|
|
|
pinctrl_usb_device_led: usb_device_led {
|
|
function = "usb_device_led";
|
|
pins = "gpio14";
|
|
};
|
|
|
|
pinctrl_pci: pci {
|
|
pinctrl_pci_req1: pci_req1 {
|
|
function = "pci_req1";
|
|
pins = "gpio16";
|
|
};
|
|
|
|
pinctrl_pci_gnt1: pci_gnt1 {
|
|
function = "pci_gnt1";
|
|
pins = "gpio17";
|
|
};
|
|
|
|
pinctrl_pci_intb: pci_intb {
|
|
function = "pci_intb";
|
|
pins = "gpio18";
|
|
};
|
|
|
|
pinctrl_pci_req0: pci_req0 {
|
|
function = "pci_req0";
|
|
pins = "gpio19";
|
|
};
|
|
|
|
pinctrl_pci_gnt0: pci_gnt0 {
|
|
function = "pci_gnt0";
|
|
pins = "gpio20";
|
|
};
|
|
};
|
|
|
|
pinctrl_pcmcia: pcmcia {
|
|
pinctrl_pcmcia_cd1: pcmcia_cd1 {
|
|
function = "pcmcia_cd1";
|
|
pins = "gpio22";
|
|
};
|
|
|
|
pinctrl_pcmcia_cd2: pcmcia_cd2 {
|
|
function = "pcmcia_cd2";
|
|
pins = "gpio23";
|
|
};
|
|
|
|
pinctrl_pcmcia_vs1: pcmcia_vs1 {
|
|
function = "pcmcia_vs1";
|
|
pins = "gpio24";
|
|
};
|
|
|
|
pinctrl_pcmcia_vs2: pcmcia_vs2 {
|
|
function = "pcmcia_vs2";
|
|
pins = "gpio25";
|
|
};
|
|
};
|
|
|
|
pinctrl_ebi_cs2: ebi_cs2 {
|
|
function = "ebi_cs2";
|
|
pins = "gpio26";
|
|
};
|
|
|
|
pinctrl_ebi_cs3: ebi_cs3 {
|
|
function = "ebi_cs2";
|
|
pins = "gpio27";
|
|
};
|
|
|
|
pinctrl_spi_cs2: spi_cs2 {
|
|
function = "spi_cs2";
|
|
pins = "gpio28";
|
|
};
|
|
|
|
pinctrl_spi_cs3: spi_cs3 {
|
|
function = "spi_cs3";
|
|
pins = "gpio29";
|
|
};
|
|
|
|
pinctrl_spi_cs4: spi_cs4 {
|
|
function = "spi_cs4";
|
|
pins = "gpio30";
|
|
};
|
|
|
|
pinctrl_spi_cs5: spi_cs5 {
|
|
function = "spi_cs5";
|
|
pins = "gpio31";
|
|
};
|
|
|
|
pinctrl_uart1: uart1 {
|
|
function = "uart1";
|
|
group = "uart1_grp";
|
|
};
|
|
};
|
|
|
|
gpiobasemode: gpiobasemode@100000b8 {
|
|
compatible = "brcm,bcm6368-gpiobasemode", "syscon";
|
|
reg = <0x100000b8 0x4>;
|
|
};
|
|
|
|
leds: led-controller@100000d0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "brcm,bcm6358-leds";
|
|
reg = <0x100000d0 0x8>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
uart0: serial@10000100 {
|
|
compatible = "brcm,bcm6345-uart";
|
|
reg = <0x10000100 0x18>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6368_IRQ_UART0>;
|
|
|
|
clocks = <&periph_osc>;
|
|
clock-names = "periph";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@10000120 {
|
|
compatible = "brcm,bcm6345-uart";
|
|
reg = <0x10000120 0x18>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6368_IRQ_UART1>;
|
|
|
|
clocks = <&periph_osc>;
|
|
clock-names = "periph";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
nflash: nand@10000200 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "brcm,nand-bcm6368",
|
|
"brcm,brcmnand-v2.1",
|
|
"brcm,brcmnand";
|
|
reg = <0x10000200 0x180>,
|
|
<0x10000600 0x200>,
|
|
<0x10000070 0x10>;
|
|
reg-names = "nand",
|
|
"nand-cache",
|
|
"nand-int-base";
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6368_IRQ_NAND>;
|
|
|
|
clocks = <&periph_clk BCM6368_CLK_NAND>;
|
|
clock-names = "nand";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
lsspi: spi@10000800 {
|
|
compatible = "brcm,bcm6358-spi";
|
|
reg = <0x10000800 0x70c>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6368_IRQ_SPI>;
|
|
|
|
clocks = <&periph_clk BCM6368_CLK_SPI>;
|
|
clock-names = "spi";
|
|
|
|
resets = <&periph_rst BCM6368_RST_SPI>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
ehci: usb@10001500 {
|
|
compatible = "brcm,bcm6368-ehci", "generic-ehci";
|
|
reg = <0x10001500 0x100>;
|
|
big-endian;
|
|
ignore-oc;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6368_IRQ_EHCI>;
|
|
|
|
phys = <&usbh 0>;
|
|
phy-names = "usb";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci: usb@10001600 {
|
|
compatible = "brcm,bcm6368-ohci", "generic-ohci";
|
|
reg = <0x10001600 0x100>;
|
|
big-endian;
|
|
no-big-frame-no;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6368_IRQ_OHCI>;
|
|
|
|
phys = <&usbh 0>;
|
|
phy-names = "usb";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
usbh: usb-phy@10001700 {
|
|
compatible = "brcm,bcm6368-usbh-phy";
|
|
reg = <0x10001700 0x38>;
|
|
|
|
#phy-cells = <1>;
|
|
|
|
clocks = <&periph_clk BCM6368_CLK_USBH>;
|
|
clock-names = "usbh";
|
|
|
|
resets = <&periph_rst BCM6368_RST_USBH>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
random: rng@10004180 {
|
|
compatible = "brcm,bcm6368-rng";
|
|
reg = <0x10004180 0x14>;
|
|
|
|
clocks = <&periph_clk BCM6368_CLK_IPSEC>;
|
|
clock-names = "ipsec";
|
|
};
|
|
};
|
|
|
|
pflash: nor@18000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "cfi-flash";
|
|
reg = <0x18000000 0x2000000>;
|
|
bank-width = <2>;
|
|
|
|
status = "disabled";
|
|
};
|
|
};
|