openwrt/target/linux/bcm63xx/dts/bcm6368-comtrend-vr-3025u.dts
Adrian Schmutzler 026fe1308c bcm63xx: use generic diag.sh
This commit removes the target-specific diag.sh script. This way, the
generic one is used for the target, which uses DT-aliases to specify the
LEDs used.

Though generic diag.sh allows to use different LEDs to indicate different
states, this patch just moves the old assignment and does not try to
"improve" the assignment by using additional colors.
However, individual proposals to do so are welcome.

For the few cases where status_led2 was used in old diag.sh, only the
primary LED was migrated.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-05-12 16:57:45 +02:00

100 lines
1.7 KiB
Plaintext

/dts-v1/;
#include "bcm6368.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Comtrend VR-3025u";
compatible = "comtrend,vr-3025u", "brcm,bcm6368";
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_green;
led-running = &led_power_green;
led-upgrade = &led_power_green;
};
chosen {
bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&pinctrl 34 1>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
dsl_green {
label = "VR-3025u:green:dsl";
gpios = <&pinctrl 2 1>;
};
inet_green {
label = "VR-3025u:green:inet";
gpios = <&pinctrl 5 0>;
};
led_power_green: power_green {
label = "VR-3025u:green:power";
gpios = <&pinctrl 22 0>;
default-state = "on";
};
power_red {
label = "VR-3025u:red:power";
gpios = <&pinctrl 24 0>;
};
inet_red {
label = "VR-3025u:red:inet";
gpios = <&pinctrl 31 0>;
};
};
};
&pflash {
status = "ok";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cfe@0 {
label = "CFE";
reg = <0x0000000 0x0020000>;
read-only;
};
linux@20000 {
label = "linux";
reg = <0x0020000 0x1fc0000>;
compatible = "brcm,bcm963xx-imagetag";
};
nvram@1fe0000 {
label = "nvram";
reg = <0x1fe0000 0x020000>;
};
};
};
&pinctrl {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pci &pinctrl_ephy0_led &pinctrl_ephy1_led
&pinctrl_ephy2_led &pinctrl_ephy3_led>;
};
&uart0 {
status = "ok";
};