mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-29 23:54:26 +00:00
02050f7e7d
Some MikroTik devices are using a Winbond NAND flash. Linux treats it as an unknown NAND before version 4.11: nand: device found, Manufacturer ID: 0xef, Chip ID: 0xf1 nand: Unknown NAND 128MiB 3,3V 8-bit nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 Backport a patch from 4.11 to show the manufacturer correctly: nand: device found, Manufacturer ID: 0xef, Chip ID: 0xf1 nand: Winbond NAND 128MiB 3,3V 8-bit nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 Tested on a MikroTik R951Ui-2HnD board. Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
This is the buildsystem for the OpenWrt Linux distribution. Please use "make menuconfig" to choose your preferred configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your OpenWrt Community http://www.openwrt.org