openwrt/target/linux/mediatek/filogic/base-files/etc/board.d
Rafał Miłecki 0186032f6a mediatek: filogic: add Acelink EW-7886CAX support
Acelink EW-7886CAX is an MT7986A (AKA Filogic 830) based access point.
It has 512 MiB of RAM, one 2.5 Gbps PoE (802.3at) Ethernet port and
on-SoC Wi-Fi. There is no printed MAC label (on my unit).

My unit came with Mediatek's firmware (based on OpenWrt 21.02)
installed. It was possible to simply upgrade using OpenWrt's sysupgrade
tool.

Another verified upgrade method is using U-Boot (requires UART). During
every boot there is "U-Boot Boot Menu". Selecting option "2. Upgrade
firmware" allows using U-Boot's tftp client to load and flash factory
image.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 07765f28b7)
2023-12-12 11:02:39 +01:00
..
01_leds mediatek: filogic: add specific layout for WR30U 2023-08-07 16:31:27 +01:00
02_network mediatek: filogic: add Acelink EW-7886CAX support 2023-12-12 11:02:39 +01:00
03_gpio_switches mediatek: filogic: Fix GPIOs for Zbtlink ZBT-Z8102AX 2023-12-10 18:33:43 +00:00
05_compat-version mediatek: sync MT7986 device trees with upstream 2023-06-09 19:23:03 +01:00