openwrt/target
Adrian Schmutzler 0104eed1e5 ath79: add support for TP-Link CPE510 v1
TP-Link CPE510-v1 is an outdoor wireless CPE for 5 GHz with
two Ethernet ports based on Atheros AR9334

Specifications:
 - 560/450/225 MHz (CPU/DDR/AHB)
 - 2x 10/100 Mbps Ethernet, 1x PoE-in, 1x PoE-out
 - 64 MB of DDR2 RAM
 - 8 MB of SPI-NOR Flash
 - 2T2R 5 GHz
 - 13 dBi built-in antenna
 - Power, LAN0, LAN1 green LEDs
 - 4x green RSSI LEDs

Flash factory image through stock firmware WEB UI
or through TFTP:
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP address:192.168.0.254

Based on the work of Paul Wassi <p.wassi@gmx.at>

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-08-07 18:04:03 +02:00
..
imagebuilder imagebuilder: new DISABLED_SERVICES make variable 2019-05-15 13:34:24 +02:00
linux ath79: add support for TP-Link CPE510 v1 2019-08-07 18:04:03 +02:00
sdk sdk: Fix cryptodev-linux build when CONFIG_ARM64_MODULE_PLTS=y 2019-08-04 22:09:20 +02:00
toolchain target/toolchain/files/wrapper.sh: simplify 'case' 2019-07-15 19:29:08 +02:00
Config.in build: add a config option for enabling a testing version of the target kernel 2019-05-11 11:37:10 +02:00
Makefile build: make <subdir>/install opt-in, use it for target/ only 2017-02-09 13:51:35 +01:00