mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 06:57:57 +00:00
2e715fb4fc
Add support for BCM2712 (Raspberry Pi 5).
3bb5880ab3
Patches were generated from the diff between linux kernel branch linux-6.1.y
and rpi-6.1.y from raspberry pi kernel source:
- git format-patch linux-6.1.y...rpi-6.1.y
Build system: x86_64
Build-tested: bcm2708, bcm2709, bcm2710, bcm2711
Run-tested: bcm2710/RPi3B, bcm2711/RPi4B
Signed-off-by: Marty Jones <mj8263788@gmail.com>
[Remove applied and reverted patches, squash patches and config commits]
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
356 lines
11 KiB
Diff
356 lines
11 KiB
Diff
From 0a1cd70189daec3baf4b4a233dd8e25ffbb9d512 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.com>
|
|
Date: Wed, 28 Apr 2021 17:46:01 +0100
|
|
Subject: [PATCH] dmaengine: dw-axi-dmac: Fixes for RP1
|
|
|
|
Don't assume that DMA addresses of devices are the same as their
|
|
physical addresses - convert correctly.
|
|
|
|
The CFG2 register layout is used when there are more than 8 channels,
|
|
but also when configured for more than 16 target peripheral devices
|
|
because the index of the handshake signal has to be made wider.
|
|
|
|
Reset the DMAC on probe
|
|
|
|
The driver goes to the trouble of tracking when transfers have been
|
|
paused, but then doesn't report that state when queried.
|
|
|
|
Not having APB registers is not an error - for most use cases it's
|
|
not even of interest, it's expected. Demote the message to debug level,
|
|
which is disabled by default.
|
|
|
|
Each channel has a descriptor pool, which is shared between transfers.
|
|
It is unsafe to treat the total number of descriptors allocated from a
|
|
pool as the number allocated to a specific transfer; doing so leads
|
|
to releasing buffers that shouldn't be released and walking off the
|
|
ends of descriptor lists. Instead, give each transfer descriptor its
|
|
own count.
|
|
|
|
Support partial transfers:
|
|
Some use cases involve streaming from a device where the transfer only
|
|
proceeds when the device's FIFO occupancy exceeds a certain threshold.
|
|
In such cases (e.g. when pulling data from a UART) it is important to
|
|
know how much data has been transferred so far, in order that remaining
|
|
bytes can be read from the FIFO directly by software.
|
|
|
|
Add the necessary code to provide this "residue" value with a finer,
|
|
sub-transfer granularity.
|
|
|
|
In order to prevent the occasional byte getting stuck in the DMA
|
|
controller's internal buffers, restrict the destination memory width
|
|
to the source register width.
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|
---
|
|
.../dma/dw-axi-dmac/dw-axi-dmac-platform.c | 136 +++++++++++++++---
|
|
drivers/dma/dw-axi-dmac/dw-axi-dmac.h | 3 +
|
|
2 files changed, 118 insertions(+), 21 deletions(-)
|
|
|
|
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
|
|
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
|
|
@@ -12,6 +12,7 @@
|
|
#include <linux/device.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/dmapool.h>
|
|
+#include <linux/dma-direct.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
@@ -79,6 +80,17 @@ axi_chan_iowrite64(struct axi_dma_chan *
|
|
iowrite32(upper_32_bits(val), chan->chan_regs + reg + 4);
|
|
}
|
|
|
|
+static inline u64
|
|
+axi_chan_ioread64(struct axi_dma_chan *chan, u32 reg)
|
|
+{
|
|
+ /*
|
|
+ * We split one 64 bit read into two 32 bit reads as some HW doesn't
|
|
+ * support 64 bit access.
|
|
+ */
|
|
+ return ((u64)ioread32(chan->chan_regs + reg + 4) << 32) +
|
|
+ ioread32(chan->chan_regs + reg);
|
|
+}
|
|
+
|
|
static inline void axi_chan_config_write(struct axi_dma_chan *chan,
|
|
struct axi_dma_chan_config *config)
|
|
{
|
|
@@ -86,7 +98,7 @@ static inline void axi_chan_config_write
|
|
|
|
cfg_lo = (config->dst_multblk_type << CH_CFG_L_DST_MULTBLK_TYPE_POS |
|
|
config->src_multblk_type << CH_CFG_L_SRC_MULTBLK_TYPE_POS);
|
|
- if (chan->chip->dw->hdata->reg_map_8_channels) {
|
|
+ if (!chan->chip->dw->hdata->reg_map_cfg2) {
|
|
cfg_hi = config->tt_fc << CH_CFG_H_TT_FC_POS |
|
|
config->hs_sel_src << CH_CFG_H_HS_SEL_SRC_POS |
|
|
config->hs_sel_dst << CH_CFG_H_HS_SEL_DST_POS |
|
|
@@ -214,7 +226,18 @@ static void axi_dma_hw_init(struct axi_d
|
|
{
|
|
int ret;
|
|
u32 i;
|
|
+ int retries = 1000;
|
|
|
|
+ axi_dma_iowrite32(chip, DMAC_RESET, 1);
|
|
+ while (axi_dma_ioread32(chip, DMAC_RESET)) {
|
|
+ retries--;
|
|
+ if (!retries) {
|
|
+ dev_err(chip->dev, "%s: DMAC failed to reset\n",
|
|
+ __func__);
|
|
+ return;
|
|
+ }
|
|
+ cpu_relax();
|
|
+ }
|
|
for (i = 0; i < chip->dw->hdata->nr_channels; i++) {
|
|
axi_chan_irq_disable(&chip->dw->chan[i], DWAXIDMAC_IRQ_ALL);
|
|
axi_chan_disable(&chip->dw->chan[i]);
|
|
@@ -276,7 +299,7 @@ static struct axi_dma_lli *axi_desc_get(
|
|
static void axi_desc_put(struct axi_dma_desc *desc)
|
|
{
|
|
struct axi_dma_chan *chan = desc->chan;
|
|
- int count = atomic_read(&chan->descs_allocated);
|
|
+ u32 count = desc->hw_desc_count;
|
|
struct axi_dma_hw_desc *hw_desc;
|
|
int descs_put;
|
|
|
|
@@ -298,6 +321,48 @@ static void vchan_desc_put(struct virt_d
|
|
axi_desc_put(vd_to_axi_desc(vdesc));
|
|
}
|
|
|
|
+static u32 axi_dma_desc_src_pos(struct axi_dma_desc *desc, dma_addr_t addr)
|
|
+{
|
|
+ unsigned int idx = 0;
|
|
+ u32 pos = 0;
|
|
+
|
|
+ while (pos < desc->length) {
|
|
+ struct axi_dma_hw_desc *hw_desc = &desc->hw_desc[idx++];
|
|
+ u32 len = hw_desc->len;
|
|
+ dma_addr_t start = le64_to_cpu(hw_desc->lli->sar);
|
|
+
|
|
+ if (addr >= start && addr <= (start + len)) {
|
|
+ pos += addr - start;
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ pos += len;
|
|
+ }
|
|
+
|
|
+ return pos;
|
|
+}
|
|
+
|
|
+static u32 axi_dma_desc_dst_pos(struct axi_dma_desc *desc, dma_addr_t addr)
|
|
+{
|
|
+ unsigned int idx = 0;
|
|
+ u32 pos = 0;
|
|
+
|
|
+ while (pos < desc->length) {
|
|
+ struct axi_dma_hw_desc *hw_desc = &desc->hw_desc[idx++];
|
|
+ u32 len = hw_desc->len;
|
|
+ dma_addr_t start = le64_to_cpu(hw_desc->lli->dar);
|
|
+
|
|
+ if (addr >= start && addr <= (start + len)) {
|
|
+ pos += addr - start;
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ pos += len;
|
|
+ }
|
|
+
|
|
+ return pos;
|
|
+}
|
|
+
|
|
static enum dma_status
|
|
dma_chan_tx_status(struct dma_chan *dchan, dma_cookie_t cookie,
|
|
struct dma_tx_state *txstate)
|
|
@@ -307,10 +372,7 @@ dma_chan_tx_status(struct dma_chan *dcha
|
|
enum dma_status status;
|
|
u32 completed_length;
|
|
unsigned long flags;
|
|
- u32 completed_blocks;
|
|
size_t bytes = 0;
|
|
- u32 length;
|
|
- u32 len;
|
|
|
|
status = dma_cookie_status(dchan, cookie, txstate);
|
|
if (status == DMA_COMPLETE || !txstate)
|
|
@@ -319,16 +381,31 @@ dma_chan_tx_status(struct dma_chan *dcha
|
|
spin_lock_irqsave(&chan->vc.lock, flags);
|
|
|
|
vdesc = vchan_find_desc(&chan->vc, cookie);
|
|
- if (vdesc) {
|
|
- length = vd_to_axi_desc(vdesc)->length;
|
|
- completed_blocks = vd_to_axi_desc(vdesc)->completed_blocks;
|
|
- len = vd_to_axi_desc(vdesc)->hw_desc[0].len;
|
|
- completed_length = completed_blocks * len;
|
|
- bytes = length - completed_length;
|
|
+ if (vdesc && vdesc == vchan_next_desc(&chan->vc)) {
|
|
+ /* This descriptor is in-progress */
|
|
+ struct axi_dma_desc *desc = vd_to_axi_desc(vdesc);
|
|
+ dma_addr_t addr;
|
|
+
|
|
+ if (chan->direction == DMA_MEM_TO_DEV) {
|
|
+ addr = axi_chan_ioread64(chan, CH_SAR);
|
|
+ completed_length = axi_dma_desc_src_pos(desc, addr);
|
|
+ } else if (chan->direction == DMA_DEV_TO_MEM) {
|
|
+ addr = axi_chan_ioread64(chan, CH_DAR);
|
|
+ completed_length = axi_dma_desc_dst_pos(desc, addr);
|
|
+ } else {
|
|
+ completed_length = 0;
|
|
+ }
|
|
+ bytes = desc->length - completed_length;
|
|
+ } else if (vdesc) {
|
|
+ /* Still in the queue so not started */
|
|
+ bytes = vd_to_axi_desc(vdesc)->length;
|
|
}
|
|
|
|
- spin_unlock_irqrestore(&chan->vc.lock, flags);
|
|
+ if (chan->is_paused && status == DMA_IN_PROGRESS)
|
|
+ status = DMA_PAUSED;
|
|
+
|
|
dma_set_residue(txstate, bytes);
|
|
+ spin_unlock_irqrestore(&chan->vc.lock, flags);
|
|
|
|
return status;
|
|
}
|
|
@@ -516,7 +593,7 @@ static void dw_axi_dma_set_hw_channel(st
|
|
unsigned long reg_value, val;
|
|
|
|
if (!chip->apb_regs) {
|
|
- dev_err(chip->dev, "apb_regs not initialized\n");
|
|
+ dev_dbg(chip->dev, "apb_regs not initialized\n");
|
|
return;
|
|
}
|
|
|
|
@@ -620,18 +697,25 @@ static int dw_axi_dma_set_hw_desc(struct
|
|
switch (chan->direction) {
|
|
case DMA_MEM_TO_DEV:
|
|
reg_width = __ffs(chan->config.dst_addr_width);
|
|
- device_addr = chan->config.dst_addr;
|
|
+ device_addr = phys_to_dma(chan->chip->dev, chan->config.dst_addr);
|
|
ctllo = reg_width << CH_CTL_L_DST_WIDTH_POS |
|
|
mem_width << CH_CTL_L_SRC_WIDTH_POS |
|
|
+ DWAXIDMAC_BURST_TRANS_LEN_1 << CH_CTL_L_DST_MSIZE_POS |
|
|
+ DWAXIDMAC_BURST_TRANS_LEN_4 << CH_CTL_L_SRC_MSIZE_POS |
|
|
DWAXIDMAC_CH_CTL_L_NOINC << CH_CTL_L_DST_INC_POS |
|
|
DWAXIDMAC_CH_CTL_L_INC << CH_CTL_L_SRC_INC_POS;
|
|
block_ts = len >> mem_width;
|
|
break;
|
|
case DMA_DEV_TO_MEM:
|
|
reg_width = __ffs(chan->config.src_addr_width);
|
|
- device_addr = chan->config.src_addr;
|
|
+ /* Prevent partial access units getting lost */
|
|
+ if (mem_width > reg_width)
|
|
+ mem_width = reg_width;
|
|
+ device_addr = phys_to_dma(chan->chip->dev, chan->config.src_addr);
|
|
ctllo = reg_width << CH_CTL_L_SRC_WIDTH_POS |
|
|
mem_width << CH_CTL_L_DST_WIDTH_POS |
|
|
+ DWAXIDMAC_BURST_TRANS_LEN_4 << CH_CTL_L_DST_MSIZE_POS |
|
|
+ DWAXIDMAC_BURST_TRANS_LEN_1 << CH_CTL_L_SRC_MSIZE_POS |
|
|
DWAXIDMAC_CH_CTL_L_INC << CH_CTL_L_DST_INC_POS |
|
|
DWAXIDMAC_CH_CTL_L_NOINC << CH_CTL_L_SRC_INC_POS;
|
|
block_ts = len >> reg_width;
|
|
@@ -667,9 +751,6 @@ static int dw_axi_dma_set_hw_desc(struct
|
|
}
|
|
|
|
hw_desc->lli->block_ts_lo = cpu_to_le32(block_ts - 1);
|
|
-
|
|
- ctllo |= DWAXIDMAC_BURST_TRANS_LEN_4 << CH_CTL_L_DST_MSIZE_POS |
|
|
- DWAXIDMAC_BURST_TRANS_LEN_4 << CH_CTL_L_SRC_MSIZE_POS;
|
|
hw_desc->lli->ctl_lo = cpu_to_le32(ctllo);
|
|
|
|
set_desc_src_master(hw_desc);
|
|
@@ -764,6 +845,8 @@ dw_axi_dma_chan_prep_cyclic(struct dma_c
|
|
src_addr += segment_len;
|
|
}
|
|
|
|
+ desc->hw_desc_count = total_segments;
|
|
+
|
|
llp = desc->hw_desc[0].llp;
|
|
|
|
/* Managed transfer list */
|
|
@@ -843,6 +926,8 @@ dw_axi_dma_chan_prep_slave_sg(struct dma
|
|
} while (len >= segment_len);
|
|
}
|
|
|
|
+ desc->hw_desc_count = loop;
|
|
+
|
|
/* Set end-of-link to the last link descriptor of list */
|
|
set_desc_last(&desc->hw_desc[num_sgs - 1]);
|
|
|
|
@@ -950,6 +1035,8 @@ dma_chan_prep_dma_memcpy(struct dma_chan
|
|
num++;
|
|
}
|
|
|
|
+ desc->hw_desc_count = num;
|
|
+
|
|
/* Set end-of-link to the last link descriptor of list */
|
|
set_desc_last(&desc->hw_desc[num - 1]);
|
|
/* Managed transfer list */
|
|
@@ -998,7 +1085,7 @@ static void axi_chan_dump_lli(struct axi
|
|
static void axi_chan_list_dump_lli(struct axi_dma_chan *chan,
|
|
struct axi_dma_desc *desc_head)
|
|
{
|
|
- int count = atomic_read(&chan->descs_allocated);
|
|
+ u32 count = desc_head->hw_desc_count;
|
|
int i;
|
|
|
|
for (i = 0; i < count; i++)
|
|
@@ -1041,11 +1128,11 @@ out:
|
|
|
|
static void axi_chan_block_xfer_complete(struct axi_dma_chan *chan)
|
|
{
|
|
- int count = atomic_read(&chan->descs_allocated);
|
|
struct axi_dma_hw_desc *hw_desc;
|
|
struct axi_dma_desc *desc;
|
|
struct virt_dma_desc *vd;
|
|
unsigned long flags;
|
|
+ u32 count;
|
|
u64 llp;
|
|
int i;
|
|
|
|
@@ -1067,6 +1154,7 @@ static void axi_chan_block_xfer_complete
|
|
if (chan->cyclic) {
|
|
desc = vd_to_axi_desc(vd);
|
|
if (desc) {
|
|
+ count = desc->hw_desc_count;
|
|
llp = lo_hi_readq(chan->chan_regs + CH_LLP);
|
|
for (i = 0; i < count; i++) {
|
|
hw_desc = &desc->hw_desc[i];
|
|
@@ -1310,6 +1398,8 @@ static int parse_device_properties(struc
|
|
chip->dw->hdata->nr_channels = tmp;
|
|
if (tmp <= DMA_REG_MAP_CH_REF)
|
|
chip->dw->hdata->reg_map_8_channels = true;
|
|
+ else
|
|
+ chip->dw->hdata->reg_map_cfg2 = true;
|
|
|
|
ret = device_property_read_u32(dev, "snps,dma-masters", &tmp);
|
|
if (ret)
|
|
@@ -1319,6 +1409,10 @@ static int parse_device_properties(struc
|
|
|
|
chip->dw->hdata->nr_masters = tmp;
|
|
|
|
+ ret = device_property_read_u32(dev, "snps,dma-targets", &tmp);
|
|
+ if (!ret && tmp > 16)
|
|
+ chip->dw->hdata->reg_map_cfg2 = true;
|
|
+
|
|
ret = device_property_read_u32(dev, "snps,data-width", &tmp);
|
|
if (ret)
|
|
return ret;
|
|
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
|
|
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
|
|
@@ -32,6 +32,8 @@ struct dw_axi_dma_hcfg {
|
|
u32 axi_rw_burst_len;
|
|
/* Register map for DMAX_NUM_CHANNELS <= 8 */
|
|
bool reg_map_8_channels;
|
|
+ /* Register map for DMAX_NUM_CHANNELS > 8 || DMAX_NUM_HS_IF > 16*/
|
|
+ bool reg_map_cfg2;
|
|
bool restrict_axi_burst_len;
|
|
};
|
|
|
|
@@ -100,6 +102,7 @@ struct axi_dma_desc {
|
|
|
|
struct virt_dma_desc vd;
|
|
struct axi_dma_chan *chan;
|
|
+ u32 hw_desc_count;
|
|
u32 completed_blocks;
|
|
u32 length;
|
|
u32 period_len;
|