openwrt/target/linux/ramips/dts/rt5350_olimex_rt5350f-olinuxino.dtsi
Chuanhong Guo b756ea2a90 ramips: replace pinctrl property names
Upstream pinctrl driver in drivers/staging uses
groups/function/ralink,num-gpios instead of
ralink,group/ralink,function/ralink,nr-gpio
Replace these properties in dts as well as the pinctrl driver in
patches-4.14.
This commit is created using:
sed -i 's/ralink,group/groups/g'
sed -i 's/ralink,function/function/g'
sed -i 's/ralink,nr-gpio/ralink,num-gpios/g'

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2020-04-12 22:29:17 +08:00

96 lines
1.2 KiB
Plaintext

#include "rt5350.dtsi"
/ {
compatible = "olimex,rt5350f-olinuxino", "ralink,rt5350-soc";
aliases {
serial0 = &uartlite;
serial1 = &uart;
};
};
&spi0 {
status = "okay";
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};
&gpio1 {
status = "okay";
};
&state_default {
gpio {
groups = "jtag";
function = "gpio";
};
uartf_gpio {
groups = "uartf";
function = "gpio uartf";
};
};
&ethernet {
mtd-mac-address = <&factory 0x4>;
};
&esw {
mediatek,portmap = <0x2f>;
mediatek,led_polarity = <0x17>;
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
ralink,led-polarity = <1>;
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};
&i2c {
status = "okay";
};
&uart {
status = "okay";
};