Daniel González Cabanelas e1a55de7a7 bmips: add support for Actiontec R1000H ... The Actiontec R1000H is a gigabit wifi router, 2.4 GHz single band with two external antennas. It comes with a coaxial HomePNA port. Hardware: - SoC: Broadcom BCM6368 - CPU: dual core BMIPS4350 V3.1 @400Mhz - RAM: 64 MB DDR - Flash: 32 MB parallel NOR - LAN switch: Broadcom BCM53115, 5x 1Gbit - LAN coaxial : 1x HPNA 3.1, CG3211 + CG3213 - Wifi 2.4 GHz: Broadcom BCM4322 802.11bgn - USB: 1x 2.0 - Buttons: 2x, 1 reset - LEDs: 7x - UART: yes The HPNA hardware probably needs a firmware to make the coaxial port work. In the OEM firmware, it's apparently sent with an utility (inhpna) through the ethernet port. Installation via CFE web UI: 1. Connect the UART serial port. 2. Power on the router and press enter at the console prompt to stop the bootloader. 4. Browse to http://192.168.1.1 and upload the OpenWrt CFE firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>		2023-06-15 17:58:58 +02:00
..
base-files	bmips: add support for Actiontec R1000H	2023-06-15 17:58:58 +02:00
config-5.15	bmips: switch to generic bcma/ssb fallback SPROM	2023-04-23 12:18:35 +02:00
config-6.1	bmips: 6.1: refresh config and add missing symbols	2023-05-30 21:00:24 +02:00
target.mk