openwrt/target/linux/ramips/dts/mt7621_dlink_flash-16m-a1.dtsi
Alan Luck e222c8054c ramips: fix and clean up D-Link MAC address
add back WIFI eprom addresses pointer in mt7621_dlink_dir-xx60-a1.dtsi
Change MAC address pointer from factory_e006 to factory_e000 + 3
	same as used in D-link firmware 1.11 DIR-1960-A1
	DIR-1960-A1,DIR-2640-A1,DIR-2660-A1,DIR-3060-A1

Clean-up MAC addresses in D-Link NOR devices DTS's
Change WIFI MAC Addressees to the same as NAND cousins macaddr_factory_e000 + ?
	as later devices don't have the MAC address in factory configuration
	same as used in D-Link firmware 1.30 DIR-878-A1
	DIR-867-A1,DIR-878-A1,DIR-878-R1,DIR-882-A1,DIR-882-R1,DIR-1935-A1

* D-link software differs between source of wan address

Signed-off-by: Alan Luck <luckyhome2008@gmail.com>
2024-02-22 22:53:30 +01:00

67 lines
1.2 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
label = "factory";
reg = <0x40000 0x20000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x4da8>;
};
eeprom_factory_8000: eeprom@8000 {
reg = <0x8000 0x4da8>;
};
macaddr_factory_e000: macaddr@e000 {
compatible = "mac-base";
reg = <0xe000 0x6>;
#nvmem-cell-cells = <1>;
};
macaddr_factory_e006: macaddr@e006 {
reg = <0xe006 0x6>;
};
};
};
partition@60000 {
compatible = "openwrt,uimage", "denx,uimage";
openwrt,padding = <96>;
label = "firmware";
reg = <0x60000 0xfa0000>;
};
};
};
};