From 723b8beaabf3c3c4b1ce69480141f1e926f3f3b2 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Sun, 27 Jul 2014 09:52:56 +0100 Subject: [PATCH 44/53] i2c: MIPS: adds ralink I2C driver Signed-off-by: John Crispin --- .../devicetree/bindings/i2c/i2c-ralink.txt | 27 ++ drivers/i2c/busses/Kconfig | 4 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-ralink.c | 327 ++++++++++++++++++++ 4 files changed, 359 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ralink.txt create mode 100644 drivers/i2c/busses/i2c-ralink.c --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt @@ -0,0 +1,27 @@ +I2C for Ralink platforms + +Required properties : +- compatible : Must be "link,rt3052-i2c" +- reg: physical base address of the controller and length of memory mapped + region. +- #address-cells = <1>; +- #size-cells = <0>; + +Optional properties: +- Child nodes conforming to i2c bus binding + +Example : + +palmbus@10000000 { + i2c@900 { + compatible = "link,rt3052-i2c"; + reg = <0x900 0x100>; + #address-cells = <1>; + #size-cells = <0>; + + hwmon@4b { + compatible = "national,lm92"; + reg = <0x4b>; + }; + }; +}; --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -1021,6 +1021,11 @@ config I2C_RK3X This driver can also be built as a module. If so, the module will be called i2c-rk3x. +config I2C_RALINK + tristate "Ralink I2C Controller" + depends on RALINK && !SOC_MT7621 + select OF_I2C + config I2C_RZV2M tristate "Renesas RZ/V2M adapter" depends on ARCH_RENESAS || COMPILE_TEST --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -96,6 +96,7 @@ obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pc obj-$(CONFIG_I2C_PNX) += i2c-pnx.o obj-$(CONFIG_I2C_PXA) += i2c-pxa.o obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o +obj-$(CONFIG_I2C_RALINK) += i2c-ralink.o obj-$(CONFIG_I2C_QCOM_CCI) += i2c-qcom-cci.o obj-$(CONFIG_I2C_QCOM_GENI) += i2c-qcom-geni.o obj-$(CONFIG_I2C_QUP) += i2c-qup.o --- /dev/null +++ b/drivers/i2c/busses/i2c-ralink.c @@ -0,0 +1,440 @@ +/* + * drivers/i2c/busses/i2c-ralink.c + * + * Copyright (C) 2013 Steven Liu + * Copyright (C) 2016 Michael Lee + * + * Improve driver for i2cdetect from i2c-tools to detect i2c devices on the bus. + * (C) 2014 Sittisak + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define REG_CONFIG_REG 0x00 +#define REG_CLKDIV_REG 0x04 +#define REG_DEVADDR_REG 0x08 +#define REG_ADDR_REG 0x0C +#define REG_DATAOUT_REG 0x10 +#define REG_DATAIN_REG 0x14 +#define REG_STATUS_REG 0x18 +#define REG_STARTXFR_REG 0x1C +#define REG_BYTECNT_REG 0x20 + +/* REG_CONFIG_REG */ +#define I2C_ADDRLEN_OFFSET 5 +#define I2C_DEVADLEN_OFFSET 2 +#define I2C_ADDRLEN_MASK 0x3 +#define I2C_ADDR_DIS BIT(1) +#define I2C_DEVADDR_DIS BIT(0) +#define I2C_ADDRLEN_8 (7 << I2C_ADDRLEN_OFFSET) +#define I2C_DEVADLEN_7 (6 << I2C_DEVADLEN_OFFSET) +#define I2C_CONF_DEFAULT (I2C_ADDRLEN_8 | I2C_DEVADLEN_7) + +/* REG_CLKDIV_REG */ +#define I2C_CLKDIV_MASK 0xffff + +/* REG_DEVADDR_REG */ +#define I2C_DEVADDR_MASK 0x7f + +/* REG_ADDR_REG */ +#define I2C_ADDR_MASK 0xff + +/* REG_STATUS_REG */ +#define I2C_STARTERR BIT(4) +#define I2C_ACKERR BIT(3) +#define I2C_DATARDY BIT(2) +#define I2C_SDOEMPTY BIT(1) +#define I2C_BUSY BIT(0) + +/* REG_STARTXFR_REG */ +#define NOSTOP_CMD BIT(2) +#define NODATA_CMD BIT(1) +#define READ_CMD BIT(0) + +/* REG_BYTECNT_REG */ +#define BYTECNT_MAX 64 +#define SET_BYTECNT(x) (x - 1) + +/* timeout waiting for I2C devices to respond (clock streching) */ +#define TIMEOUT_MS 1000 +#define DELAY_INTERVAL_US 100 + +struct rt_i2c { + void __iomem *base; + struct clk *clk; + struct device *dev; + struct i2c_adapter adap; + u32 cur_clk; + u32 clk_div; + u32 flags; +}; + +static void rt_i2c_w32(struct rt_i2c *i2c, u32 val, unsigned reg) +{ + iowrite32(val, i2c->base + reg); +} + +static u32 rt_i2c_r32(struct rt_i2c *i2c, unsigned reg) +{ + return ioread32(i2c->base + reg); +} + +static int poll_down_timeout(void __iomem *addr, u32 mask) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS); + + do { + if (!(readl_relaxed(addr) & mask)) + return 0; + + usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50); + } while (time_before(jiffies, timeout)); + + return (readl_relaxed(addr) & mask) ? -EAGAIN : 0; +} + +static int rt_i2c_wait_idle(struct rt_i2c *i2c) +{ + int ret; + + ret = poll_down_timeout(i2c->base + REG_STATUS_REG, I2C_BUSY); + if (ret < 0) + dev_dbg(i2c->dev, "idle err(%d)\n", ret); + + return ret; +} + +static int poll_up_timeout(void __iomem *addr, u32 mask) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS); + u32 status; + + do { + status = readl_relaxed(addr); + + /* check error status */ + if (status & I2C_STARTERR) + return -EAGAIN; + else if (status & I2C_ACKERR) + return -ENXIO; + else if (status & mask) + return 0; + + usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50); + } while (time_before(jiffies, timeout)); + + return -ETIMEDOUT; +} + +static int rt_i2c_wait_rx_done(struct rt_i2c *i2c) +{ + int ret; + + ret = poll_up_timeout(i2c->base + REG_STATUS_REG, I2C_DATARDY); + if (ret < 0) + dev_dbg(i2c->dev, "rx err(%d)\n", ret); + + return ret; +} + +static int rt_i2c_wait_tx_done(struct rt_i2c *i2c) +{ + int ret; + + ret = poll_up_timeout(i2c->base + REG_STATUS_REG, I2C_SDOEMPTY); + if (ret < 0) + dev_dbg(i2c->dev, "tx err(%d)\n", ret); + + return ret; +} + +static void rt_i2c_reset(struct rt_i2c *i2c) +{ + int ret; + + ret = device_reset(i2c->adap.dev.parent); + if (ret) + dev_err(i2c->dev, "Failed to reset device"); + + barrier(); + rt_i2c_w32(i2c, i2c->clk_div, REG_CLKDIV_REG); +} + +static void rt_i2c_dump_reg(struct rt_i2c *i2c) +{ + dev_dbg(i2c->dev, "conf %08x, clkdiv %08x, devaddr %08x, " \ + "addr %08x, dataout %08x, datain %08x, " \ + "status %08x, startxfr %08x, bytecnt %08x\n", + rt_i2c_r32(i2c, REG_CONFIG_REG), + rt_i2c_r32(i2c, REG_CLKDIV_REG), + rt_i2c_r32(i2c, REG_DEVADDR_REG), + rt_i2c_r32(i2c, REG_ADDR_REG), + rt_i2c_r32(i2c, REG_DATAOUT_REG), + rt_i2c_r32(i2c, REG_DATAIN_REG), + rt_i2c_r32(i2c, REG_STATUS_REG), + rt_i2c_r32(i2c, REG_STARTXFR_REG), + rt_i2c_r32(i2c, REG_BYTECNT_REG)); +} + +static int rt_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, + int num) +{ + struct rt_i2c *i2c; + struct i2c_msg *pmsg; + unsigned char addr; + int i, j, ret; + u32 cmd; + + i2c = i2c_get_adapdata(adap); + + for (i = 0; i < num; i++) { + pmsg = &msgs[i]; + if (i == (num - 1)) + cmd = 0; + else + cmd = NOSTOP_CMD; + + dev_dbg(i2c->dev, "addr: 0x%x, len: %d, flags: 0x%x, stop: %d\n", + pmsg->addr, pmsg->len, pmsg->flags, + (cmd == 0)? 1 : 0); + + /* wait hardware idle */ + if ((ret = rt_i2c_wait_idle(i2c))) + goto err_timeout; + + if (pmsg->flags & I2C_M_TEN) { + rt_i2c_w32(i2c, I2C_CONF_DEFAULT, REG_CONFIG_REG); + /* 10 bits address */ + addr = 0x78 | ((pmsg->addr >> 8) & 0x03); + rt_i2c_w32(i2c, addr & I2C_DEVADDR_MASK, + REG_DEVADDR_REG); + rt_i2c_w32(i2c, pmsg->addr & I2C_ADDR_MASK, + REG_ADDR_REG); + } else { + rt_i2c_w32(i2c, I2C_CONF_DEFAULT | I2C_ADDR_DIS, + REG_CONFIG_REG); + /* 7 bits address */ + rt_i2c_w32(i2c, pmsg->addr & I2C_DEVADDR_MASK, + REG_DEVADDR_REG); + } + + /* buffer length */ + if (pmsg->len == 0) + cmd |= NODATA_CMD; + else + rt_i2c_w32(i2c, SET_BYTECNT(pmsg->len), + REG_BYTECNT_REG); + + j = 0; + if (pmsg->flags & I2C_M_RD) { + cmd |= READ_CMD; + /* start transfer */ + barrier(); + rt_i2c_w32(i2c, cmd, REG_STARTXFR_REG); + do { + /* wait */ + if ((ret = rt_i2c_wait_rx_done(i2c))) + goto err_timeout; + /* read data */ + if (pmsg->len) + pmsg->buf[j] = rt_i2c_r32(i2c, + REG_DATAIN_REG); + j++; + } while (j < pmsg->len); + } else { + do { + /* write data */ + if (pmsg->len) + rt_i2c_w32(i2c, pmsg->buf[j], + REG_DATAOUT_REG); + /* start transfer */ + if (j == 0) { + barrier(); + rt_i2c_w32(i2c, cmd, REG_STARTXFR_REG); + } + /* wait */ + if ((ret = rt_i2c_wait_tx_done(i2c))) + goto err_timeout; + j++; + } while (j < pmsg->len); + } + } + /* the return value is number of executed messages */ + ret = i; + + return ret; + +err_timeout: + rt_i2c_dump_reg(i2c); + rt_i2c_reset(i2c); + return ret; +} + +static u32 rt_i2c_func(struct i2c_adapter *a) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static const struct i2c_algorithm rt_i2c_algo = { + .master_xfer = rt_i2c_master_xfer, + .functionality = rt_i2c_func, +}; + +static const struct of_device_id i2c_rt_dt_ids[] = { + { .compatible = "ralink,rt2880-i2c" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, i2c_rt_dt_ids); + +static struct i2c_adapter_quirks rt_i2c_quirks = { + .max_write_len = BYTECNT_MAX, + .max_read_len = BYTECNT_MAX, +}; + +static int rt_i2c_init(struct rt_i2c *i2c) +{ + u32 reg; + + /* i2c_sclk = periph_clk / ((2 * clk_div) + 5) */ + i2c->clk_div = (clk_get_rate(i2c->clk) - (5 * i2c->cur_clk)) / + (2 * i2c->cur_clk); + if (i2c->clk_div < 8) + i2c->clk_div = 8; + if (i2c->clk_div > I2C_CLKDIV_MASK) + i2c->clk_div = I2C_CLKDIV_MASK; + + /* check support combinde/repeated start message */ + rt_i2c_w32(i2c, NOSTOP_CMD, REG_STARTXFR_REG); + reg = rt_i2c_r32(i2c, REG_STARTXFR_REG) & NOSTOP_CMD; + + rt_i2c_reset(i2c); + + return reg; +} + +static int rt_i2c_probe(struct platform_device *pdev) +{ + struct resource *res; + struct rt_i2c *i2c; + struct i2c_adapter *adap; + const struct of_device_id *match; + int ret, restart; + + match = of_match_device(i2c_rt_dt_ids, &pdev->dev); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "no memory resource found\n"); + return -ENODEV; + } + + i2c = devm_kzalloc(&pdev->dev, sizeof(struct rt_i2c), GFP_KERNEL); + if (!i2c) { + dev_err(&pdev->dev, "failed to allocate i2c_adapter\n"); + return -ENOMEM; + } + + i2c->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(i2c->base)) + return PTR_ERR(i2c->base); + + i2c->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(i2c->clk)) { + dev_err(&pdev->dev, "no clock defined\n"); + return -ENODEV; + } + clk_prepare_enable(i2c->clk); + i2c->dev = &pdev->dev; + + if (of_property_read_u32(pdev->dev.of_node, + "clock-frequency", &i2c->cur_clk)) + i2c->cur_clk = 100000; + + adap = &i2c->adap; + adap->owner = THIS_MODULE; + adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; + adap->algo = &rt_i2c_algo; + adap->retries = 3; + adap->dev.parent = &pdev->dev; + i2c_set_adapdata(adap, i2c); + adap->dev.of_node = pdev->dev.of_node; + strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name)); + adap->quirks = &rt_i2c_quirks; + + platform_set_drvdata(pdev, i2c); + + restart = rt_i2c_init(i2c); + + ret = i2c_add_adapter(adap); + if (ret < 0) { + dev_err(&pdev->dev, "failed to add adapter\n"); + clk_disable_unprepare(i2c->clk); + return ret; + } + + dev_info(&pdev->dev, "clock %uKHz, re-start %ssupport\n", + i2c->cur_clk/1000, restart ? "" : "not "); + + return ret; +} + +static int rt_i2c_remove(struct platform_device *pdev) +{ + struct rt_i2c *i2c = platform_get_drvdata(pdev); + + i2c_del_adapter(&i2c->adap); + clk_disable_unprepare(i2c->clk); + + return 0; +} + +static struct platform_driver rt_i2c_driver = { + .probe = rt_i2c_probe, + .remove = rt_i2c_remove, + .driver = { + .owner = THIS_MODULE, + .name = "i2c-ralink", + .of_match_table = i2c_rt_dt_ids, + }, +}; + +static int __init i2c_rt_init (void) +{ + return platform_driver_register(&rt_i2c_driver); +} +subsys_initcall(i2c_rt_init); + +static void __exit i2c_rt_exit (void) +{ + platform_driver_unregister(&rt_i2c_driver); +} +module_exit(i2c_rt_exit); + +MODULE_AUTHOR("Steven Liu "); +MODULE_DESCRIPTION("Ralink I2c host driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:Ralink-I2C");