From e6b225ff8990635dc2d6d8dbd72e78dec1f36c62 Mon Sep 17 00:00:00 2001 From: Weijie Gao Date: Wed, 31 Aug 2022 19:04:45 +0800 Subject: [PATCH 16/32] spi: add support for MediaTek spi-mem controller This patch adds support for spi-mem controller found on newer MediaTek SoCs This controller supports Single/Dual/Quad SPI mode. Reviewed-by: Simon Glass Signed-off-by: SkyLake.Huang --- drivers/spi/Kconfig | 8 + drivers/spi/Makefile | 1 + drivers/spi/mtk_spim.c | 701 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 710 insertions(+) create mode 100644 drivers/spi/mtk_spim.c --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -262,6 +262,14 @@ config MTK_SNFI_SPI used to access SPI memory devices like SPI-NOR or SPI-NAND on platforms embedding this IP core, like MT7622/M7629. +config MTK_SPIM + bool "Mediatek SPI-MEM master controller driver" + depends on SPI_MEM + help + Enable MediaTek SPI-MEM master controller driver. This driver mainly + supports SPI flashes. You can use single, dual or quad mode + transmission on this controller. + config MVEBU_A3700_SPI bool "Marvell Armada 3700 SPI driver" select CLK_ARMADA_3720 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_MPC8XX_SPI) += mpc8xx_spi.o obj-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o obj-$(CONFIG_MTK_SNFI_SPI) += mtk_snfi_spi.o obj-$(CONFIG_MTK_SNOR) += mtk_snor.o +obj-$(CONFIG_MTK_SPIM) += mtk_spim.o obj-$(CONFIG_MT7620_SPI) += mt7620_spi.o obj-$(CONFIG_MT7621_SPI) += mt7621_spi.o obj-$(CONFIG_MSCC_BB_SPI) += mscc_bb_spi.o --- /dev/null +++ b/drivers/spi/mtk_spim.c @@ -0,0 +1,701 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2022 MediaTek Inc. All Rights Reserved. + * + * Author: SkyLake.Huang + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SPI_CFG0_REG 0x0000 +#define SPI_CFG1_REG 0x0004 +#define SPI_TX_SRC_REG 0x0008 +#define SPI_RX_DST_REG 0x000c +#define SPI_TX_DATA_REG 0x0010 +#define SPI_RX_DATA_REG 0x0014 +#define SPI_CMD_REG 0x0018 +#define SPI_IRQ_REG 0x001c +#define SPI_STATUS_REG 0x0020 +#define SPI_PAD_SEL_REG 0x0024 +#define SPI_CFG2_REG 0x0028 +#define SPI_TX_SRC_REG_64 0x002c +#define SPI_RX_DST_REG_64 0x0030 +#define SPI_CFG3_IPM_REG 0x0040 + +#define SPI_CFG0_SCK_HIGH_OFFSET 0 +#define SPI_CFG0_SCK_LOW_OFFSET 8 +#define SPI_CFG0_CS_HOLD_OFFSET 16 +#define SPI_CFG0_CS_SETUP_OFFSET 24 +#define SPI_ADJUST_CFG0_CS_HOLD_OFFSET 0 +#define SPI_ADJUST_CFG0_CS_SETUP_OFFSET 16 + +#define SPI_CFG1_CS_IDLE_OFFSET 0 +#define SPI_CFG1_PACKET_LOOP_OFFSET 8 +#define SPI_CFG1_PACKET_LENGTH_OFFSET 16 +#define SPI_CFG1_GET_TICKDLY_OFFSET 29 + +#define SPI_CFG1_GET_TICKDLY_MASK GENMASK(31, 29) +#define SPI_CFG1_CS_IDLE_MASK 0xff +#define SPI_CFG1_PACKET_LOOP_MASK 0xff00 +#define SPI_CFG1_PACKET_LENGTH_MASK 0x3ff0000 +#define SPI_CFG1_IPM_PACKET_LENGTH_MASK GENMASK(31, 16) +#define SPI_CFG2_SCK_HIGH_OFFSET 0 +#define SPI_CFG2_SCK_LOW_OFFSET 16 +#define SPI_CFG2_SCK_HIGH_MASK GENMASK(15, 0) +#define SPI_CFG2_SCK_LOW_MASK GENMASK(31, 16) + +#define SPI_CMD_ACT BIT(0) +#define SPI_CMD_RESUME BIT(1) +#define SPI_CMD_RST BIT(2) +#define SPI_CMD_PAUSE_EN BIT(4) +#define SPI_CMD_DEASSERT BIT(5) +#define SPI_CMD_SAMPLE_SEL BIT(6) +#define SPI_CMD_CS_POL BIT(7) +#define SPI_CMD_CPHA BIT(8) +#define SPI_CMD_CPOL BIT(9) +#define SPI_CMD_RX_DMA BIT(10) +#define SPI_CMD_TX_DMA BIT(11) +#define SPI_CMD_TXMSBF BIT(12) +#define SPI_CMD_RXMSBF BIT(13) +#define SPI_CMD_RX_ENDIAN BIT(14) +#define SPI_CMD_TX_ENDIAN BIT(15) +#define SPI_CMD_FINISH_IE BIT(16) +#define SPI_CMD_PAUSE_IE BIT(17) +#define SPI_CMD_IPM_NONIDLE_MODE BIT(19) +#define SPI_CMD_IPM_SPIM_LOOP BIT(21) +#define SPI_CMD_IPM_GET_TICKDLY_OFFSET 22 + +#define SPI_CMD_IPM_GET_TICKDLY_MASK GENMASK(24, 22) + +#define PIN_MODE_CFG(x) ((x) / 2) + +#define SPI_CFG3_IPM_PIN_MODE_OFFSET 0 +#define SPI_CFG3_IPM_HALF_DUPLEX_DIR BIT(2) +#define SPI_CFG3_IPM_HALF_DUPLEX_EN BIT(3) +#define SPI_CFG3_IPM_XMODE_EN BIT(4) +#define SPI_CFG3_IPM_NODATA_FLAG BIT(5) +#define SPI_CFG3_IPM_CMD_BYTELEN_OFFSET 8 +#define SPI_CFG3_IPM_ADDR_BYTELEN_OFFSET 12 +#define SPI_CFG3_IPM_DUMMY_BYTELEN_OFFSET 16 + +#define SPI_CFG3_IPM_CMD_PIN_MODE_MASK GENMASK(1, 0) +#define SPI_CFG3_IPM_CMD_BYTELEN_MASK GENMASK(11, 8) +#define SPI_CFG3_IPM_ADDR_BYTELEN_MASK GENMASK(15, 12) +#define SPI_CFG3_IPM_DUMMY_BYTELEN_MASK GENMASK(19, 16) + +#define MT8173_SPI_MAX_PAD_SEL 3 + +#define MTK_SPI_PAUSE_INT_STATUS 0x2 + +#define MTK_SPI_IDLE 0 +#define MTK_SPI_PAUSED 1 + +#define MTK_SPI_MAX_FIFO_SIZE 32U +#define MTK_SPI_PACKET_SIZE 1024 +#define MTK_SPI_IPM_PACKET_SIZE SZ_64K +#define MTK_SPI_IPM_PACKET_LOOP SZ_256 + +#define MTK_SPI_32BITS_MASK 0xffffffff + +#define DMA_ADDR_EXT_BITS 36 +#define DMA_ADDR_DEF_BITS 32 + +#define CLK_TO_US(freq, clkcnt) DIV_ROUND_UP((clkcnt), (freq) / 1000000) + +/* struct mtk_spim_capability + * @enhance_timing: Some IC design adjust cfg register to enhance time accuracy + * @dma_ext: Some IC support DMA addr extension + * @ipm_design: The IPM IP design improves some features, and supports dual/quad mode + * @support_quad: Whether quad mode is supported + */ +struct mtk_spim_capability { + bool enhance_timing; + bool dma_ext; + bool ipm_design; + bool support_quad; +}; + +/* struct mtk_spim_priv + * @base: Base address of the spi controller + * @state: Controller state + * @sel_clk: Pad clock + * @spi_clk: Core clock + * @xfer_len: Current length of data for transfer + * @hw_cap: Controller capabilities + * @tick_dly: Used to postpone SPI sampling time + * @sample_sel: Sample edge of MISO + * @dev: udevice of this spi controller + * @tx_dma: Tx DMA address + * @rx_dma: Rx DMA address + */ +struct mtk_spim_priv { + void __iomem *base; + u32 state; + struct clk sel_clk, spi_clk; + u32 xfer_len; + struct mtk_spim_capability hw_cap; + u32 tick_dly; + u32 sample_sel; + + struct device *dev; + dma_addr_t tx_dma; + dma_addr_t rx_dma; +}; + +static void mtk_spim_reset(struct mtk_spim_priv *priv) +{ + /* set the software reset bit in SPI_CMD_REG. */ + setbits_le32(priv->base + SPI_CMD_REG, SPI_CMD_RST); + clrbits_le32(priv->base + SPI_CMD_REG, SPI_CMD_RST); +} + +static int mtk_spim_hw_init(struct spi_slave *slave) +{ + struct udevice *bus = dev_get_parent(slave->dev); + struct mtk_spim_priv *priv = dev_get_priv(bus); + u16 cpha, cpol; + u32 reg_val; + + cpha = slave->mode & SPI_CPHA ? 1 : 0; + cpol = slave->mode & SPI_CPOL ? 1 : 0; + + if (priv->hw_cap.enhance_timing) { + if (priv->hw_cap.ipm_design) { + /* CFG3 reg only used for spi-mem, + * here write to default value + */ + writel(0x0, priv->base + SPI_CFG3_IPM_REG); + clrsetbits_le32(priv->base + SPI_CMD_REG, + SPI_CMD_IPM_GET_TICKDLY_MASK, + priv->tick_dly << + SPI_CMD_IPM_GET_TICKDLY_OFFSET); + } else { + clrsetbits_le32(priv->base + SPI_CFG1_REG, + SPI_CFG1_GET_TICKDLY_MASK, + priv->tick_dly << + SPI_CFG1_GET_TICKDLY_OFFSET); + } + } + + reg_val = readl(priv->base + SPI_CMD_REG); + if (priv->hw_cap.ipm_design) { + /* SPI transfer without idle time until packet length done */ + reg_val |= SPI_CMD_IPM_NONIDLE_MODE; + if (slave->mode & SPI_LOOP) + reg_val |= SPI_CMD_IPM_SPIM_LOOP; + else + reg_val &= ~SPI_CMD_IPM_SPIM_LOOP; + } + + if (cpha) + reg_val |= SPI_CMD_CPHA; + else + reg_val &= ~SPI_CMD_CPHA; + if (cpol) + reg_val |= SPI_CMD_CPOL; + else + reg_val &= ~SPI_CMD_CPOL; + + /* set the mlsbx and mlsbtx */ + if (slave->mode & SPI_LSB_FIRST) { + reg_val &= ~SPI_CMD_TXMSBF; + reg_val &= ~SPI_CMD_RXMSBF; + } else { + reg_val |= SPI_CMD_TXMSBF; + reg_val |= SPI_CMD_RXMSBF; + } + + /* do not reverse tx/rx endian */ + reg_val &= ~SPI_CMD_TX_ENDIAN; + reg_val &= ~SPI_CMD_RX_ENDIAN; + + if (priv->hw_cap.enhance_timing) { + /* set CS polarity */ + if (slave->mode & SPI_CS_HIGH) + reg_val |= SPI_CMD_CS_POL; + else + reg_val &= ~SPI_CMD_CS_POL; + + if (priv->sample_sel) + reg_val |= SPI_CMD_SAMPLE_SEL; + else + reg_val &= ~SPI_CMD_SAMPLE_SEL; + } + + /* disable dma mode */ + reg_val &= ~(SPI_CMD_TX_DMA | SPI_CMD_RX_DMA); + + /* disable deassert mode */ + reg_val &= ~SPI_CMD_DEASSERT; + + writel(reg_val, priv->base + SPI_CMD_REG); + + return 0; +} + +static void mtk_spim_prepare_transfer(struct mtk_spim_priv *priv, + u32 speed_hz) +{ + u32 spi_clk_hz, div, sck_time, cs_time, reg_val; + + spi_clk_hz = clk_get_rate(&priv->spi_clk); + if (speed_hz <= spi_clk_hz / 4) + div = DIV_ROUND_UP(spi_clk_hz, speed_hz); + else + div = 4; + + sck_time = (div + 1) / 2; + cs_time = sck_time * 2; + + if (priv->hw_cap.enhance_timing) { + reg_val = ((sck_time - 1) & 0xffff) + << SPI_CFG2_SCK_HIGH_OFFSET; + reg_val |= ((sck_time - 1) & 0xffff) + << SPI_CFG2_SCK_LOW_OFFSET; + writel(reg_val, priv->base + SPI_CFG2_REG); + + reg_val = ((cs_time - 1) & 0xffff) + << SPI_ADJUST_CFG0_CS_HOLD_OFFSET; + reg_val |= ((cs_time - 1) & 0xffff) + << SPI_ADJUST_CFG0_CS_SETUP_OFFSET; + writel(reg_val, priv->base + SPI_CFG0_REG); + } else { + reg_val = ((sck_time - 1) & 0xff) + << SPI_CFG0_SCK_HIGH_OFFSET; + reg_val |= ((sck_time - 1) & 0xff) << SPI_CFG0_SCK_LOW_OFFSET; + reg_val |= ((cs_time - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET; + reg_val |= ((cs_time - 1) & 0xff) << SPI_CFG0_CS_SETUP_OFFSET; + writel(reg_val, priv->base + SPI_CFG0_REG); + } + + reg_val = readl(priv->base + SPI_CFG1_REG); + reg_val &= ~SPI_CFG1_CS_IDLE_MASK; + reg_val |= ((cs_time - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET; + writel(reg_val, priv->base + SPI_CFG1_REG); +} + +/** + * mtk_spim_setup_packet() - setup packet format. + * @priv: controller priv + * + * This controller sents/receives data in packets. The packet size is + * configurable. + * + * This function calculates the maximum packet size available for current + * data, and calculates the number of packets required to sent/receive data + * as much as possible. + */ +static void mtk_spim_setup_packet(struct mtk_spim_priv *priv) +{ + u32 packet_size, packet_loop, reg_val; + + /* Calculate maximum packet size */ + if (priv->hw_cap.ipm_design) + packet_size = min_t(u32, + priv->xfer_len, + MTK_SPI_IPM_PACKET_SIZE); + else + packet_size = min_t(u32, + priv->xfer_len, + MTK_SPI_PACKET_SIZE); + + /* Calculates number of packets to sent/receive */ + packet_loop = priv->xfer_len / packet_size; + + reg_val = readl(priv->base + SPI_CFG1_REG); + if (priv->hw_cap.ipm_design) + reg_val &= ~SPI_CFG1_IPM_PACKET_LENGTH_MASK; + else + reg_val &= ~SPI_CFG1_PACKET_LENGTH_MASK; + + reg_val |= (packet_size - 1) << SPI_CFG1_PACKET_LENGTH_OFFSET; + + reg_val &= ~SPI_CFG1_PACKET_LOOP_MASK; + + reg_val |= (packet_loop - 1) << SPI_CFG1_PACKET_LOOP_OFFSET; + + writel(reg_val, priv->base + SPI_CFG1_REG); +} + +static void mtk_spim_enable_transfer(struct mtk_spim_priv *priv) +{ + u32 cmd; + + cmd = readl(priv->base + SPI_CMD_REG); + if (priv->state == MTK_SPI_IDLE) + cmd |= SPI_CMD_ACT; + else + cmd |= SPI_CMD_RESUME; + writel(cmd, priv->base + SPI_CMD_REG); +} + +static bool mtk_spim_supports_op(struct spi_slave *slave, + const struct spi_mem_op *op) +{ + struct udevice *bus = dev_get_parent(slave->dev); + struct mtk_spim_priv *priv = dev_get_priv(bus); + + if (op->cmd.buswidth == 0 || op->cmd.buswidth > 4 || + op->addr.buswidth > 4 || op->dummy.buswidth > 4 || + op->data.buswidth > 4) + return false; + + if (!priv->hw_cap.support_quad && (op->cmd.buswidth > 2 || + op->addr.buswidth > 2 || op->dummy.buswidth > 2 || + op->data.buswidth > 2)) + return false; + + if (op->addr.nbytes && op->dummy.nbytes && + op->addr.buswidth != op->dummy.buswidth) + return false; + + if (op->addr.nbytes + op->dummy.nbytes > 16) + return false; + + if (op->data.nbytes > MTK_SPI_IPM_PACKET_SIZE) { + if (op->data.nbytes / MTK_SPI_IPM_PACKET_SIZE > + MTK_SPI_IPM_PACKET_LOOP || + op->data.nbytes % MTK_SPI_IPM_PACKET_SIZE != 0) + return false; + } + + return true; +} + +static void mtk_spim_setup_dma_xfer(struct mtk_spim_priv *priv, + const struct spi_mem_op *op) +{ + writel((u32)(priv->tx_dma & MTK_SPI_32BITS_MASK), + priv->base + SPI_TX_SRC_REG); + + if (priv->hw_cap.dma_ext) + writel((u32)(priv->tx_dma >> 32), + priv->base + SPI_TX_SRC_REG_64); + + if (op->data.dir == SPI_MEM_DATA_IN) { + writel((u32)(priv->rx_dma & MTK_SPI_32BITS_MASK), + priv->base + SPI_RX_DST_REG); + + if (priv->hw_cap.dma_ext) + writel((u32)(priv->rx_dma >> 32), + priv->base + SPI_RX_DST_REG_64); + } +} + +static int mtk_spim_transfer_wait(struct spi_slave *slave, + const struct spi_mem_op *op) +{ + struct udevice *bus = dev_get_parent(slave->dev); + struct mtk_spim_priv *priv = dev_get_priv(bus); + u32 sck_l, sck_h, spi_bus_clk, clk_count, reg; + ulong us = 1; + int ret = 0; + + if (op->data.dir == SPI_MEM_NO_DATA) + clk_count = 32; + else + clk_count = op->data.nbytes; + + spi_bus_clk = clk_get_rate(&priv->spi_clk); + sck_l = readl(priv->base + SPI_CFG2_REG) >> SPI_CFG2_SCK_LOW_OFFSET; + sck_h = readl(priv->base + SPI_CFG2_REG) & SPI_CFG2_SCK_HIGH_MASK; + do_div(spi_bus_clk, sck_l + sck_h + 2); + + us = CLK_TO_US(spi_bus_clk, clk_count * 8); + us += 1000 * 1000; /* 1s tolerance */ + + if (us > UINT_MAX) + us = UINT_MAX; + + ret = readl_poll_timeout(priv->base + SPI_STATUS_REG, reg, + reg & 0x1, us); + if (ret < 0) { + dev_err(priv->dev, "transfer timeout, val: 0x%lx\n", us); + return -ETIMEDOUT; + } + + return 0; +} + +static int mtk_spim_exec_op(struct spi_slave *slave, + const struct spi_mem_op *op) +{ + struct udevice *bus = dev_get_parent(slave->dev); + struct mtk_spim_priv *priv = dev_get_priv(bus); + u32 reg_val, nio = 1, tx_size; + char *tx_tmp_buf; + char *rx_tmp_buf; + int i, ret = 0; + + mtk_spim_reset(priv); + mtk_spim_hw_init(slave); + mtk_spim_prepare_transfer(priv, slave->max_hz); + + reg_val = readl(priv->base + SPI_CFG3_IPM_REG); + /* opcode byte len */ + reg_val &= ~SPI_CFG3_IPM_CMD_BYTELEN_MASK; + reg_val |= 1 << SPI_CFG3_IPM_CMD_BYTELEN_OFFSET; + + /* addr & dummy byte len */ + if (op->addr.nbytes || op->dummy.nbytes) + reg_val |= (op->addr.nbytes + op->dummy.nbytes) << + SPI_CFG3_IPM_ADDR_BYTELEN_OFFSET; + + /* data byte len */ + if (!op->data.nbytes) { + reg_val |= SPI_CFG3_IPM_NODATA_FLAG; + writel(0, priv->base + SPI_CFG1_REG); + } else { + reg_val &= ~SPI_CFG3_IPM_NODATA_FLAG; + priv->xfer_len = op->data.nbytes; + mtk_spim_setup_packet(priv); + } + + if (op->addr.nbytes || op->dummy.nbytes) { + if (op->addr.buswidth == 1 || op->dummy.buswidth == 1) + reg_val |= SPI_CFG3_IPM_XMODE_EN; + else + reg_val &= ~SPI_CFG3_IPM_XMODE_EN; + } + + if (op->addr.buswidth == 2 || + op->dummy.buswidth == 2 || + op->data.buswidth == 2) + nio = 2; + else if (op->addr.buswidth == 4 || + op->dummy.buswidth == 4 || + op->data.buswidth == 4) + nio = 4; + + reg_val &= ~SPI_CFG3_IPM_CMD_PIN_MODE_MASK; + reg_val |= PIN_MODE_CFG(nio) << SPI_CFG3_IPM_PIN_MODE_OFFSET; + + reg_val |= SPI_CFG3_IPM_HALF_DUPLEX_EN; + if (op->data.dir == SPI_MEM_DATA_IN) + reg_val |= SPI_CFG3_IPM_HALF_DUPLEX_DIR; + else + reg_val &= ~SPI_CFG3_IPM_HALF_DUPLEX_DIR; + writel(reg_val, priv->base + SPI_CFG3_IPM_REG); + + tx_size = 1 + op->addr.nbytes + op->dummy.nbytes; + if (op->data.dir == SPI_MEM_DATA_OUT) + tx_size += op->data.nbytes; + + tx_size = max(tx_size, (u32)32); + + /* Fill up tx data */ + tx_tmp_buf = kzalloc(tx_size, GFP_KERNEL); + if (!tx_tmp_buf) { + ret = -ENOMEM; + goto exit; + } + + tx_tmp_buf[0] = op->cmd.opcode; + + if (op->addr.nbytes) { + for (i = 0; i < op->addr.nbytes; i++) + tx_tmp_buf[i + 1] = op->addr.val >> + (8 * (op->addr.nbytes - i - 1)); + } + + if (op->dummy.nbytes) + memset(tx_tmp_buf + op->addr.nbytes + 1, 0xff, + op->dummy.nbytes); + + if (op->data.nbytes && op->data.dir == SPI_MEM_DATA_OUT) + memcpy(tx_tmp_buf + op->dummy.nbytes + op->addr.nbytes + 1, + op->data.buf.out, op->data.nbytes); + /* Finish filling up tx data */ + + priv->tx_dma = dma_map_single(tx_tmp_buf, tx_size, DMA_TO_DEVICE); + if (dma_mapping_error(priv->dev, priv->tx_dma)) { + ret = -ENOMEM; + goto tx_free; + } + + if (op->data.dir == SPI_MEM_DATA_IN) { + if (!IS_ALIGNED((size_t)op->data.buf.in, 4)) { + rx_tmp_buf = kzalloc(op->data.nbytes, GFP_KERNEL); + if (!rx_tmp_buf) { + ret = -ENOMEM; + goto tx_unmap; + } + } else { + rx_tmp_buf = op->data.buf.in; + } + + priv->rx_dma = dma_map_single(rx_tmp_buf, op->data.nbytes, + DMA_FROM_DEVICE); + if (dma_mapping_error(priv->dev, priv->rx_dma)) { + ret = -ENOMEM; + goto rx_free; + } + } + + reg_val = readl(priv->base + SPI_CMD_REG); + reg_val |= SPI_CMD_TX_DMA; + if (op->data.dir == SPI_MEM_DATA_IN) + reg_val |= SPI_CMD_RX_DMA; + + writel(reg_val, priv->base + SPI_CMD_REG); + + mtk_spim_setup_dma_xfer(priv, op); + + mtk_spim_enable_transfer(priv); + + /* Wait for the interrupt. */ + ret = mtk_spim_transfer_wait(slave, op); + if (ret) + goto rx_unmap; + + if (op->data.dir == SPI_MEM_DATA_IN && + !IS_ALIGNED((size_t)op->data.buf.in, 4)) + memcpy(op->data.buf.in, rx_tmp_buf, op->data.nbytes); + +rx_unmap: + /* spi disable dma */ + reg_val = readl(priv->base + SPI_CMD_REG); + reg_val &= ~SPI_CMD_TX_DMA; + if (op->data.dir == SPI_MEM_DATA_IN) + reg_val &= ~SPI_CMD_RX_DMA; + writel(reg_val, priv->base + SPI_CMD_REG); + + writel(0, priv->base + SPI_TX_SRC_REG); + writel(0, priv->base + SPI_RX_DST_REG); + + if (op->data.dir == SPI_MEM_DATA_IN) + dma_unmap_single(priv->rx_dma, + op->data.nbytes, DMA_FROM_DEVICE); +rx_free: + if (op->data.dir == SPI_MEM_DATA_IN && + !IS_ALIGNED((size_t)op->data.buf.in, 4)) + kfree(rx_tmp_buf); +tx_unmap: + dma_unmap_single(priv->tx_dma, + tx_size, DMA_TO_DEVICE); +tx_free: + kfree(tx_tmp_buf); +exit: + return ret; +} + +static int mtk_spim_adjust_op_size(struct spi_slave *slave, + struct spi_mem_op *op) +{ + int opcode_len; + + if (!op->data.nbytes) + return 0; + + if (op->data.dir != SPI_MEM_NO_DATA) { + opcode_len = 1 + op->addr.nbytes + op->dummy.nbytes; + if (opcode_len + op->data.nbytes > MTK_SPI_IPM_PACKET_SIZE) { + op->data.nbytes = MTK_SPI_IPM_PACKET_SIZE - opcode_len; + /* force data buffer dma-aligned. */ + op->data.nbytes -= op->data.nbytes % 4; + } + } + + return 0; +} + +static int mtk_spim_get_attr(struct mtk_spim_priv *priv, struct udevice *dev) +{ + int ret; + + priv->hw_cap.enhance_timing = dev_read_bool(dev, "enhance_timing"); + priv->hw_cap.dma_ext = dev_read_bool(dev, "dma_ext"); + priv->hw_cap.ipm_design = dev_read_bool(dev, "ipm_design"); + priv->hw_cap.support_quad = dev_read_bool(dev, "support_quad"); + + ret = dev_read_u32(dev, "tick_dly", &priv->tick_dly); + if (ret < 0) + dev_err(priv->dev, "tick dly not set.\n"); + + ret = dev_read_u32(dev, "sample_sel", &priv->sample_sel); + if (ret < 0) + dev_err(priv->dev, "sample sel not set.\n"); + + return ret; +} + +static int mtk_spim_probe(struct udevice *dev) +{ + struct mtk_spim_priv *priv = dev_get_priv(dev); + int ret; + + priv->base = (void __iomem *)devfdt_get_addr(dev); + if (!priv->base) + return -EINVAL; + + mtk_spim_get_attr(priv, dev); + + ret = clk_get_by_name(dev, "sel-clk", &priv->sel_clk); + if (ret < 0) { + dev_err(dev, "failed to get sel-clk\n"); + return ret; + } + + ret = clk_get_by_name(dev, "spi-clk", &priv->spi_clk); + if (ret < 0) { + dev_err(dev, "failed to get spi-clk\n"); + return ret; + } + + clk_enable(&priv->sel_clk); + clk_enable(&priv->spi_clk); + + return 0; +} + +static int mtk_spim_set_speed(struct udevice *dev, uint speed) +{ + return 0; +} + +static int mtk_spim_set_mode(struct udevice *dev, uint mode) +{ + return 0; +} + +static const struct spi_controller_mem_ops mtk_spim_mem_ops = { + .adjust_op_size = mtk_spim_adjust_op_size, + .supports_op = mtk_spim_supports_op, + .exec_op = mtk_spim_exec_op +}; + +static const struct dm_spi_ops mtk_spim_ops = { + .mem_ops = &mtk_spim_mem_ops, + .set_speed = mtk_spim_set_speed, + .set_mode = mtk_spim_set_mode, +}; + +static const struct udevice_id mtk_spim_ids[] = { + { .compatible = "mediatek,ipm-spi" }, + {} +}; + +U_BOOT_DRIVER(mtk_spim) = { + .name = "mtk_spim", + .id = UCLASS_SPI, + .of_match = mtk_spim_ids, + .ops = &mtk_spim_ops, + .priv_auto = sizeof(struct mtk_spim_priv), + .probe = mtk_spim_probe, +};