From 716c220b4d990a4fe7800d0685ca69dee99e4e8f Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Pavel=20L=C3=B6bl?= <pavel@loebl.cz>
Date: Fri, 6 May 2022 06:42:46 +0200
Subject: [PATCH] brcmfmac: allow setting wlan MAC address using device tree
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This allows firmware to provide MAC address using device tree. Like in
case there is no MAC burned in wlan NVRAM.

Signed-off-by: Pavel Löbl <pavel@loebl.cz>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220506044246.67146-1-pavel@loebl.cz
---
 .../broadcom/brcm80211/brcmfmac/common.c      | 23 ++++++++++++++-----
 .../broadcom/brcm80211/brcmfmac/common.h      |  1 +
 .../broadcom/brcm80211/brcmfmac/core.c        |  4 +++-
 .../wireless/broadcom/brcm80211/brcmfmac/of.c |  3 +++
 4 files changed, 24 insertions(+), 7 deletions(-)

--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
@@ -202,13 +202,24 @@ int brcmf_c_preinit_dcmds(struct brcmf_i
 	char *ptr;
 	s32 err;
 
-	/* retreive mac address */
-	err = brcmf_fil_iovar_data_get(ifp, "cur_etheraddr", ifp->mac_addr,
-				       sizeof(ifp->mac_addr));
-	if (err < 0) {
-		bphy_err(drvr, "Retrieving cur_etheraddr failed, %d\n", err);
-		goto done;
+	if (is_valid_ether_addr(ifp->mac_addr)) {
+		/* set mac address */
+		err = brcmf_fil_iovar_data_set(ifp, "cur_etheraddr", ifp->mac_addr,
+					       ETH_ALEN);
+		if (err < 0) {
+			bphy_err(ifp->drvr, "Setting cur_etheraddr failed, %d\n", err);
+			goto done;
+		}
+	} else {
+		/* retrieve mac address */
+		err = brcmf_fil_iovar_data_get(ifp, "cur_etheraddr", ifp->mac_addr,
+					       sizeof(ifp->mac_addr));
+		if (err < 0) {
+			bphy_err(drvr, "Retrieving cur_etheraddr failed, %d\n", err);
+			goto done;
+		}
 	}
+
 	memcpy(ifp->drvr->mac, ifp->mac_addr, sizeof(ifp->drvr->mac));
 	memcpy(ifp->drvr->wiphy->perm_addr, ifp->drvr->mac, ETH_ALEN);
 
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
@@ -50,6 +50,7 @@ struct brcmf_mp_device {
 	bool		ignore_probe_fail;
 	struct brcmfmac_pd_cc *country_codes;
 	const char	*board_type;
+	unsigned char	mac[ETH_ALEN];
 	union {
 		struct brcmfmac_sdio_pd sdio;
 	} bus;
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -7,6 +7,7 @@
 #include <linux/etherdevice.h>
 #include <linux/module.h>
 #include <linux/inetdevice.h>
+#include <linux/property.h>
 #include <net/cfg80211.h>
 #include <net/rtnetlink.h>
 #include <net/addrconf.h>
@@ -1226,7 +1227,8 @@ static int brcmf_bus_started(struct brcm
 	brcmf_dbg(TRACE, "\n");
 
 	/* add primary networking interface */
-	ifp = brcmf_add_if(drvr, 0, 0, false, "wlan%d", NULL);
+	ifp = brcmf_add_if(drvr, 0, 0, false, "wlan%d",
+			   is_valid_ether_addr(drvr->settings->mac) ? drvr->settings->mac : NULL);
 	if (IS_ERR(ifp))
 		return PTR_ERR(ifp);
 
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
@@ -5,6 +5,7 @@
 #include <linux/init.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
+#include <linux/of_net.h>
 
 #include <defs.h>
 #include "debug.h"
@@ -97,6 +98,8 @@ void brcmf_of_probe(struct device *dev,
 	if (err)
 		brcmf_err("failed to get OF country code map (err=%d)\n", err);
 
+	of_get_mac_address(np, settings->mac);
+
 	if (bus_type != BRCMF_BUSTYPE_SDIO)
 		return;