From 38be6fdf7e93431e91aac3884837b22236325f68 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= Date: Mon, 22 Jan 2024 08:34:31 +0300 Subject: [PATCH 21/48] net: dsa: mt7530: support OF-based registration of switch MDIO bus MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently the MDIO bus of the switches the MT7530 DSA subdriver controls can only be registered as non-OF-based. Bring support for registering the bus OF-based. The subdrivers that control switches [with MDIO bus] probed on OF must follow this logic to support all cases properly: No switch MDIO bus defined: Populate ds->user_mii_bus, register the MDIO bus, set the interrupts for PHYs if "interrupt-controller" is defined at the switch node. This case should only be covered for the switches which their dt-bindings documentation didn't document the MDIO bus from the start. This is to keep supporting the device trees that do not describe the MDIO bus on the device tree but the MDIO bus is being used nonetheless. Switch MDIO bus defined: Don't populate ds->user_mii_bus, register the MDIO bus, set the interrupts for PHYs if ["interrupt-controller" is defined at the switch node and "interrupts" is defined at the PHY nodes under the switch MDIO bus node]. Switch MDIO bus defined but explicitly disabled: If the device tree says status = "disabled" for the MDIO bus, we shouldn't need an MDIO bus at all. Instead, just exit as early as possible and do not call any MDIO API. The use of ds->user_mii_bus is inappropriate when the MDIO bus of the switch is described on the device tree [1], which is why we don't populate ds->user_mii_bus in that case. Link: https://lore.kernel.org/netdev/20231213120656.x46fyad6ls7sqyzv@skbuf/ [1] Suggested-by: David Bauer Signed-off-by: Arınç ÜNAL Reviewed-by: Vladimir Oltean Link: https://lore.kernel.org/r/20240122053431.7751-1-arinc.unal@arinc9.com Signed-off-by: Paolo Abeni --- drivers/net/dsa/mt7530.c | 34 ++++++++++++++++++++++++++-------- 1 file changed, 26 insertions(+), 8 deletions(-) --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -2175,24 +2175,40 @@ mt7530_free_irq_common(struct mt7530_pri static void mt7530_free_irq(struct mt7530_priv *priv) { - mt7530_free_mdio_irq(priv); + struct device_node *mnp, *np = priv->dev->of_node; + + mnp = of_get_child_by_name(np, "mdio"); + if (!mnp) + mt7530_free_mdio_irq(priv); + of_node_put(mnp); + mt7530_free_irq_common(priv); } static int mt7530_setup_mdio(struct mt7530_priv *priv) { + struct device_node *mnp, *np = priv->dev->of_node; struct dsa_switch *ds = priv->ds; struct device *dev = priv->dev; struct mii_bus *bus; static int idx; - int ret; + int ret = 0; + + mnp = of_get_child_by_name(np, "mdio"); + + if (mnp && !of_device_is_available(mnp)) + goto out; bus = devm_mdiobus_alloc(dev); - if (!bus) - return -ENOMEM; + if (!bus) { + ret = -ENOMEM; + goto out; + } + + if (!mnp) + ds->slave_mii_bus = bus; - ds->slave_mii_bus = bus; bus->priv = priv; bus->name = KBUILD_MODNAME "-mii"; snprintf(bus->id, MII_BUS_ID_SIZE, KBUILD_MODNAME "-%d", idx++); @@ -2201,16 +2217,18 @@ mt7530_setup_mdio(struct mt7530_priv *pr bus->parent = dev; bus->phy_mask = ~ds->phys_mii_mask; - if (priv->irq) + if (priv->irq && !mnp) mt7530_setup_mdio_irq(priv); - ret = devm_mdiobus_register(dev, bus); + ret = devm_of_mdiobus_register(dev, bus, mnp); if (ret) { dev_err(dev, "failed to register MDIO bus: %d\n", ret); - if (priv->irq) + if (priv->irq && !mnp) mt7530_free_mdio_irq(priv); } +out: + of_node_put(mnp); return ret; }