// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /dts-v1/; #include #include #include #include "mt7986a.dtsi" / { model = "GL.iNet GL-MT6000"; compatible = "glinet,gl-mt6000", "mediatek,mt7986a"; aliases { serial0 = &uart0; label-mac-device = &gmac1; led-boot = &led_blue; led-failsafe = &led_blue; led-running = &led_white; led-upgrade = &led_white; }; chosen { stdout-path = "serial0:115200n8"; bootargs-append = " root=PARTLABEL=rootfs rootwait"; }; reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "1.8vd"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; keys { compatible = "gpio-keys"; reset { label = "reset"; linux,code = ; gpios = <&pio 9 GPIO_ACTIVE_LOW>; }; }; leds { compatible = "gpio-leds"; led_blue: led@0 { label = "blue:run"; gpios = <&pio 38 GPIO_ACTIVE_LOW>; }; led_white: led@1 { label = "white:system"; gpios = <&pio 37 GPIO_ACTIVE_LOW>; }; }; usb_vbus: regulator-usb-vbus { compatible = "regulator-fixed"; regulator-name = "usb_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpios = <&pio 24 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-boot-on; }; }; ð { status = "okay"; gmac0: mac@0 { compatible = "mediatek,eth-mac"; reg = <0>; phy-mode = "2500base-x"; nvmem-cells = <&macaddr_factory_a 2>; nvmem-cell-names = "mac-address"; fixed-link { speed = <2500>; full-duplex; pause; }; }; gmac1: mac@1 { compatible = "mediatek,eth-mac"; reg = <1>; nvmem-cells = <&macaddr_factory_a 0>; nvmem-cell-names = "mac-address"; phy-mode = "2500base-x"; phy-handle = <&phy1>; }; mdio: mdio-bus { #address-cells = <1>; #size-cells = <0>; phy1: phy@1 { compatible = "ethernet-phy-ieee802.3-c45"; reg = <1>; reset-assert-us = <100000>; reset-deassert-us = <100000>; reset-gpios = <&pio 10 GPIO_ACTIVE_LOW>; interrupt-parent = <&pio>; interrupts = <46 IRQ_TYPE_LEVEL_LOW>; realtek,aldps-enable; }; phy7: ethernet-phy@7 { compatible = "ethernet-phy-ieee802.3-c45"; reg = <7>; reset-assert-us = <100000>; reset-deassert-us = <100000>; reset-gpios = <&pio 19 GPIO_ACTIVE_LOW>; interrupt-parent = <&pio>; interrupts = <47 IRQ_TYPE_LEVEL_LOW>; realtek,aldps-enable; }; switch: switch@1f { compatible = "mediatek,mt7531"; reg = <31>; reset-gpios = <&pio 18 GPIO_ACTIVE_HIGH>; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&pio>; interrupts = <66 IRQ_TYPE_LEVEL_HIGH>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; label = "lan2"; }; port@1 { reg = <1>; label = "lan3"; }; port@2 { reg = <2>; label = "lan4"; }; port@3 { reg = <3>; label = "lan5"; }; port@5 { reg = <5>; label = "lan1"; phy-handle = <&phy7>; phy-mode = "2500base-x"; }; port@6 { reg = <6>; ethernet = <&gmac0>; phy-mode = "2500base-x"; fixed-link { speed = <2500>; full-duplex; pause; }; }; }; }; }; }; &pio { wf_2g_5g_pins: wf_2g_5g-pins { mux { function = "wifi"; groups = "wf_2g", "wf_5g"; }; conf { pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", "WF1_TOP_CLK", "WF1_TOP_DATA"; drive-strength = <4>; }; }; mmc0_pins_default: mmc0-pins { mux { function = "emmc"; groups = "emmc_51"; }; conf-cmd-dat { pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; input-enable; drive-strength = <4>; mediatek,pull-up-adv = <1>; /* pull-up 10K */ }; conf-clk { pins = "EMMC_CK"; drive-strength = <6>; mediatek,pull-down-adv = <2>; /* pull-down 50K */ }; conf-ds { pins = "EMMC_DSL"; mediatek,pull-down-adv = <2>; /* pull-down 50K */ }; conf-rst { pins = "EMMC_RSTB"; drive-strength = <4>; mediatek,pull-up-adv = <1>; /* pull-up 10K */ }; }; mmc0_pins_uhs: mmc0-uhs-pins { mux { function = "emmc"; groups = "emmc_51"; }; conf-cmd-dat { pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; input-enable; drive-strength = <4>; mediatek,pull-up-adv = <1>; /* pull-up 10K */ }; conf-clk { pins = "EMMC_CK"; drive-strength = <6>; mediatek,pull-down-adv = <2>; /* pull-down 50K */ }; conf-ds { pins = "EMMC_DSL"; mediatek,pull-down-adv = <2>; /* pull-down 50K */ }; conf-rst { pins = "EMMC_RSTB"; drive-strength = <4>; mediatek,pull-up-adv = <1>; /* pull-up 10K */ }; }; }; &crypto { status = "okay"; }; &ssusb { vusb33-supply = <®_3p3v>; vbus-supply = <&usb_vbus>; status = "okay"; }; &trng { status = "okay"; }; &uart0 { status = "okay"; }; &usb_phy { status = "okay"; }; &watchdog { status = "okay"; }; &wifi { nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; pinctrl-names = "default"; pinctrl-0 = <&wf_2g_5g_pins>; status = "okay"; }; &mmc0 { pinctrl-names = "default", "state_uhs"; pinctrl-0 = <&mmc0_pins_default>; pinctrl-1 = <&mmc0_pins_uhs>; bus-width = <8>; max-frequency = <200000000>; cap-mmc-highspeed; mmc-hs200-1_8v; mmc-hs400-1_8v; hs400-ds-delay = <0x14014>; vmmc-supply = <®_3p3v>; vqmmc-supply = <®_1p8v>; non-removable; no-sd; no-sdio; status = "okay"; card@0 { compatible = "mmc-card"; reg = <0>; block { compatible = "block-device"; partitions { block-partition-env { partname = "u-boot-env"; nvmem-layout { compatible = "u-boot,env-layout"; }; }; block-partition-factory { partname = "factory"; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0x1000>; }; macaddr_factory_a: macaddr@a { compatible = "mac-base"; reg = <0xa 0x6>; #nvmem-cell-cells = <1>; }; }; }; }; }; }; };