// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "qca956x.dtsi" #include #include / { keys { compatible = "gpio-keys"; wps { label = "wps"; linux,code = ; gpios = <&gpio 1 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; reset { label = "reset"; linux,code = ; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; }; }; &pcie { status = "okay"; wifi@0,0 { compatible = "qcom,ath10k"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&calibration_ath10k>, <&macaddr_devdata_94>; nvmem-cell-names = "calibration", "mac-address-ascii"; }; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "bootloader"; reg = <0x000000 0x040000>; read-only; }; partition@40000 { compatible = "u-boot,env"; label = "bdcfg"; reg = <0x040000 0x010000>; }; partition@50000 { label = "devdata"; reg = <0x050000 0x010000>; read-only; compatible = "nvmem-cells"; #address-cells = <1>; #size-cells = <1>; macaddr_devdata_94: macaddr@94 { reg = <0x94 0x11>; }; macaddr_devdata_b0: macaddr@b0 { reg = <0xb0 0x11>; }; }; partition@60000 { label = "devconf"; reg = <0x060000 0x010000>; read-only; }; partition@70000 { compatible = "seama"; label = "firmware"; reg = <0x070000 0xf80000>; }; partition@ff0000 { label = "art"; reg = <0xff0000 0x010000>; read-only; compatible = "nvmem-cells"; #address-cells = <1>; #size-cells = <1>; calibration_ath9k: calibration@1000 { reg = <0x1000 0x440>; }; calibration_ath10k: calibration@5000 { reg = <0x5000 0x844>; }; }; }; }; }; &mdio0 { status = "okay"; phy0: ethernet-phy@0 { reg = <0>; phy-mode = "sgmii"; qca,mib-poll-interval = <500>; reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>; qca,ar8327-initvals = < 0x04 0x00080080 /* PORT0 PAD MODE CTRL */ 0x10 0x81000080 /* POWER_ON_STRAP */ 0x50 0xcc35cc35 /* LED_CTRL0 */ 0x54 0xcb37cb37 /* LED_CTRL1 */ 0x58 0x00000000 /* LED_CTRL2 */ 0x5c 0x00f3cf00 /* LED_CTRL3 */ 0x7c 0x0000007e /* PORT0_STATUS */ >; }; }; ð0 { status = "okay"; pll-data = <0x03000101 0x00000101 0x00001919>; phy-mode = "sgmii"; phy-handle = <&phy0>; }; &wmac { status = "okay"; nvmem-cells = <&calibration_ath9k>, <&macaddr_devdata_b0>; nvmem-cell-names = "calibration", "mac-address-ascii"; };