From 2d3960e58ef7c83fe1dbf952f056b9e906cb6df8 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Mon, 17 Apr 2023 17:17:29 +0200 Subject: [PATCH 7/9] net: phy: marvell: Add software control of the LEDs Add a brightness function, so the LEDs can be controlled from software using the standard Linux LED infrastructure. Signed-off-by: Andrew Lunn Signed-off-by: Christian Marangi Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 45 ++++++++++++++++++++++++++++++++++----- 1 file changed, 40 insertions(+), 5 deletions(-) --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -144,11 +144,13 @@ /* WOL Event Interrupt Enable */ #define MII_88E1318S_PHY_CSIER_WOL_EIE BIT(7) -/* LED Timer Control Register */ -#define MII_88E1318S_PHY_LED_TCR 0x12 -#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15) -#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7) -#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW BIT(11) +#define MII_88E1318S_PHY_LED_FUNC 0x10 +#define MII_88E1318S_PHY_LED_FUNC_OFF (0x8) +#define MII_88E1318S_PHY_LED_FUNC_ON (0x9) +#define MII_88E1318S_PHY_LED_TCR 0x12 +#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15) +#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7) +#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW BIT(11) /* Magic Packet MAC address registers */ #define MII_88E1318S_PHY_MAGIC_PACKET_WORD2 0x17 @@ -2832,6 +2834,34 @@ static int marvell_hwmon_probe(struct ph } #endif +static int m88e1318_led_brightness_set(struct phy_device *phydev, + u8 index, enum led_brightness value) +{ + int reg; + + reg = phy_read_paged(phydev, MII_MARVELL_LED_PAGE, + MII_88E1318S_PHY_LED_FUNC); + if (reg < 0) + return reg; + + switch (index) { + case 0: + case 1: + case 2: + reg &= ~(0xf << (4 * index)); + if (value == LED_OFF) + reg |= MII_88E1318S_PHY_LED_FUNC_OFF << (4 * index); + else + reg |= MII_88E1318S_PHY_LED_FUNC_ON << (4 * index); + break; + default: + return -EINVAL; + } + + return phy_write_paged(phydev, MII_MARVELL_LED_PAGE, + MII_88E1318S_PHY_LED_FUNC, reg); +} + static int marvell_probe(struct phy_device *phydev) { struct marvell_priv *priv; @@ -3081,6 +3111,7 @@ static struct phy_driver marvell_drivers .get_sset_count = marvell_get_sset_count, .get_strings = marvell_get_strings, .get_stats = marvell_get_stats, + .led_brightness_set = m88e1318_led_brightness_set, }, { .phy_id = MARVELL_PHY_ID_88E1145, @@ -3187,6 +3218,7 @@ static struct phy_driver marvell_drivers .cable_test_start = marvell_vct7_cable_test_start, .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start, .cable_test_get_status = marvell_vct7_cable_test_get_status, + .led_brightness_set = m88e1318_led_brightness_set, }, { .phy_id = MARVELL_PHY_ID_88E1540, @@ -3213,6 +3245,7 @@ static struct phy_driver marvell_drivers .cable_test_start = marvell_vct7_cable_test_start, .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start, .cable_test_get_status = marvell_vct7_cable_test_get_status, + .led_brightness_set = m88e1318_led_brightness_set, }, { .phy_id = MARVELL_PHY_ID_88E1545, @@ -3239,6 +3272,7 @@ static struct phy_driver marvell_drivers .cable_test_start = marvell_vct7_cable_test_start, .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start, .cable_test_get_status = marvell_vct7_cable_test_get_status, + .led_brightness_set = m88e1318_led_brightness_set, }, { .phy_id = MARVELL_PHY_ID_88E3016, @@ -3380,6 +3414,7 @@ static struct phy_driver marvell_drivers .get_stats = marvell_get_stats, .get_tunable = m88e1540_get_tunable, .set_tunable = m88e1540_set_tunable, + .led_brightness_set = m88e1318_led_brightness_set, }, };