#include "mt7628an.dtsi" #include #include / { compatible = "mercury,mac1200r-v2", "mediatek,mt7628an-soc"; model = "Mercury MAC1200R v2"; aliases { led-boot = &led_status; led-failsafe = &led_status; led-running = &led_status; led-upgrade = &led_status; }; leds { compatible = "gpio-leds"; led_status: status { label = "green:status"; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; }; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x1d800>; }; factory: partition@1d800 { compatible = "nvmem-cells"; label = "factory_info"; reg = <0x1d800 0x800>; #address-cells = <1>; #size-cells = <1>; read-only; eeprom_factory_0: eeprom@0 { reg = <0x0 0x400>; }; macaddr_factory_d: macaddr@d { reg = <0xd 0x6>; }; }; art: partition@1e000 { label = "art"; reg = <0x1e000 0x2000>; read-only; }; partition@20000 { label = "config"; reg = <0x20000 0x10000>; }; partition@30000 { label = "u-boot2"; reg = <0x30000 0x10000>; }; partition@40000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x40000 0x7c0000>; }; }; }; }; ðernet { pinctrl-names = "default"; nvmem-cells = <&macaddr_factory_d>; nvmem-cell-names = "mac-address"; }; &esw { mediatek,portmap = <0x2f>; }; &wmac { status = "okay"; nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; }; &pcie { status = "okay"; }; &pcie0 { mt76@0,0 { reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&art 0x1000>; ieee80211-freq-limit = <5000000 6000000>; }; };