From cd6af13c35957c6052696d8e0080f0a7c25ea68f Mon Sep 17 00:00:00 2001 From: Nick Hollinghurst Date: Wed, 6 Dec 2023 14:27:57 +0000 Subject: [PATCH 0797/1085] drivers: media: i2c: imx296,imx477: Configure tigger_mode every time Don't assume the camera has been reset each time we start streaming, but always write registers relating to trigger_mode, even in mode 0. IMX477: Stop driving XVS on stop streaming, to avoid spurious pulses. Signed-off-by: Nick Hollinghurst --- drivers/media/i2c/imx296.c | 9 +++++---- drivers/media/i2c/imx477.c | 29 ++++++++++++++--------------- 2 files changed, 19 insertions(+), 19 deletions(-) --- a/drivers/media/i2c/imx296.c +++ b/drivers/media/i2c/imx296.c @@ -583,10 +583,11 @@ static int imx296_stream_on(struct imx29 imx296_write(sensor, IMX296_CTRL00, 0, &ret); usleep_range(2000, 5000); - if (trigger_mode == 1) { - imx296_write(sensor, IMX296_CTRL0B, IMX296_CTRL0B_TRIGEN, &ret); - imx296_write(sensor, IMX296_LOWLAGTRG, IMX296_LOWLAGTRG_FAST, &ret); - } + /* external trigger mode: 0=normal, 1=triggered */ + imx296_write(sensor, IMX296_CTRL0B, + (trigger_mode == 1) ? IMX296_CTRL0B_TRIGEN : 0, &ret); + imx296_write(sensor, IMX296_LOWLAGTRG, + (trigger_mode == 1) ? IMX296_LOWLAGTRG_FAST : 0, &ret); imx296_write(sensor, IMX296_CTRL0A, 0, &ret); --- a/drivers/media/i2c/imx477.c +++ b/drivers/media/i2c/imx477.c @@ -1742,26 +1742,21 @@ static int imx477_start_streaming(struct imx477_write_reg(imx477, 0x0b05, IMX477_REG_VALUE_08BIT, !!dpc_enable); imx477_write_reg(imx477, 0x0b06, IMX477_REG_VALUE_08BIT, !!dpc_enable); - /* Set vsync trigger mode */ - if (trigger_mode != 0) { - /* trigger_mode == 1 for source, 2 for sink */ - const u32 val = (trigger_mode == 1) ? 1 : 0; - - imx477_write_reg(imx477, IMX477_REG_MC_MODE, - IMX477_REG_VALUE_08BIT, 1); - imx477_write_reg(imx477, IMX477_REG_MS_SEL, - IMX477_REG_VALUE_08BIT, val); - imx477_write_reg(imx477, IMX477_REG_XVS_IO_CTRL, - IMX477_REG_VALUE_08BIT, val); - imx477_write_reg(imx477, IMX477_REG_EXTOUT_EN, - IMX477_REG_VALUE_08BIT, val); - } - /* Apply customized values from user */ ret = __v4l2_ctrl_handler_setup(imx477->sd.ctrl_handler); if (ret) return ret; + /* Set vsync trigger mode: 0=standalone, 1=source, 2=sink */ + imx477_write_reg(imx477, IMX477_REG_MC_MODE, + IMX477_REG_VALUE_08BIT, (trigger_mode > 0) ? 1 : 0); + imx477_write_reg(imx477, IMX477_REG_MS_SEL, + IMX477_REG_VALUE_08BIT, (trigger_mode <= 1) ? 1 : 0); + imx477_write_reg(imx477, IMX477_REG_XVS_IO_CTRL, + IMX477_REG_VALUE_08BIT, (trigger_mode == 1) ? 1 : 0); + imx477_write_reg(imx477, IMX477_REG_EXTOUT_EN, + IMX477_REG_VALUE_08BIT, (trigger_mode == 1) ? 1 : 0); + /* set stream on register */ return imx477_write_reg(imx477, IMX477_REG_MODE_SELECT, IMX477_REG_VALUE_08BIT, IMX477_MODE_STREAMING); @@ -1778,6 +1773,10 @@ static void imx477_stop_streaming(struct IMX477_REG_VALUE_08BIT, IMX477_MODE_STANDBY); if (ret) dev_err(&client->dev, "%s failed to set stream\n", __func__); + + /* Stop driving XVS out (there is still a weak pull-up) */ + imx477_write_reg(imx477, IMX477_REG_EXTOUT_EN, + IMX477_REG_VALUE_08BIT, 0); } static int imx477_set_stream(struct v4l2_subdev *sd, int enable)