From 134e06abd2d002edfdac3561656ab9e8161b29a3 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Fri, 31 Jan 2020 16:53:13 +0000
Subject: [PATCH] ARM: dts: Clean out downstream BCM2711/2838 files

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
 arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 157 -----
 arch/arm/boot/dts/bcm2711-rpi.dtsi    |   7 -
 arch/arm/boot/dts/bcm2711.dtsi        | 890 --------------------------
 arch/arm/boot/dts/bcm2838-rpi.dtsi    |  25 -
 arch/arm/boot/dts/bcm2838.dtsi        | 733 ---------------------
 5 files changed, 1812 deletions(-)
 delete mode 100644 arch/arm/boot/dts/bcm2711-rpi-4-b.dts
 delete mode 100644 arch/arm/boot/dts/bcm2711-rpi.dtsi
 delete mode 100644 arch/arm/boot/dts/bcm2711.dtsi
 delete mode 100644 arch/arm/boot/dts/bcm2838-rpi.dtsi
 delete mode 100644 arch/arm/boot/dts/bcm2838.dtsi

--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ /dev/null
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2711.dtsi"
-#include "bcm2835-rpi.dtsi"
-#include "bcm283x-rpi-usb-peripheral.dtsi"
-
-/ {
-	compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
-	model = "Raspberry Pi 4 Model B";
-
-	chosen {
-		/* 8250 auxiliary UART instead of pl011 */
-		stdout-path = "serial1:115200n8";
-	};
-
-	/* Will be filled by the bootloader */
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0 0>;
-	};
-
-	aliases {
-		ethernet0 = &genet;
-	};
-
-	leds {
-		act {
-			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
-		};
-
-		pwr {
-			label = "PWR";
-			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
-	};
-
-	sd_io_1v8_reg: sd_io_1v8_reg {
-		compatible = "regulator-gpio";
-		regulator-name = "vdd-sd-io";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-		regulator-settling-time-us = <5000>;
-		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x1
-			  3300000 0x0>;
-		status = "okay";
-	};
-};
-
-&firmware {
-	expgpio: gpio {
-		compatible = "raspberrypi,firmware-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names = "BT_ON",
-				  "WL_ON",
-				  "PWR_LED_OFF",
-				  "GLOBAL_RESET",
-				  "VDD_SD_IO_SEL",
-				  "CAM_GPIO",
-				  "",
-				  "";
-		status = "okay";
-	};
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
-	status = "okay";
-};
-
-/* SDHCI is used to control the SDIO for wireless */
-&sdhci {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_gpio34>;
-	bus-width = <4>;
-	non-removable;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
-};
-
-/* EMMC2 is used to drive the SD card */
-&emmc2 {
-	vqmmc-supply = <&sd_io_1v8_reg>;
-	broken-cd;
-	status = "okay";
-};
-
-&genet {
-	phy-handle = <&phy1>;
-	phy-mode = "rgmii-rxid";
-	status = "okay";
-};
-
-&genet_mdio {
-	phy1: ethernet-phy@1 {
-		/* No PHY interrupt */
-		reg = <0x1>;
-	};
-};
-
-/* uart0 communicates with the BT module */
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
-	uart-has-rtscts;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		max-speed = <2000000>;
-		shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-/* uart1 is mapped to the pin header */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_gpio14>;
-	status = "okay";
-};
-
-&vchiq {
-	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-/ {
-	__overrides__ {
-		act_led_gpio = <&act_led>,"gpios:4";
-		act_led_activelow = <&act_led>,"gpios:8";
-		act_led_trigger = <&act_led>,"linux,default-trigger";
-
-		pwr_led_gpio = <&pwr_led>,"gpios:4";
-		pwr_led_activelow = <&pwr_led>,"gpios:8";
-		pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
-
-		eth_led0 = <&phy1>,"led-modes:0";
-		eth_led1 = <&phy1>,"led-modes:4";
-
-		sd_poll_once = <&emmc2>, "non-removable?";
-	};
-};
--- a/arch/arm/boot/dts/bcm2711-rpi.dtsi
+++ /dev/null
@@ -1,7 +0,0 @@
-#include "bcm2708-rpi.dtsi"
-#include "bcm2838-rpi.dtsi"
-
-&v3d {
-     /* Undo the overwriting by bcm270x.dtsi */
-     power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
-};
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ /dev/null
@@ -1,890 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "bcm283x.dtsi"
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/soc/bcm2835-pm.h>
-
-/ {
-	compatible = "brcm,bcm2711";
-
-	#address-cells = <2>;
-	#size-cells = <1>;
-
-	interrupt-parent = <&gicv2>;
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * arm64 reserves the CMA by default somewhere in ZONE_DMA32,
-		 * that's not good enough for the BCM2711 as some devices can
-		 * only address the lower 1G of memory (ZONE_DMA).
-		 */
-		linux,cma {
-			compatible = "shared-dma-pool";
-			size = <0x2000000>; /* 32MB */
-			alloc-ranges = <0x0 0x00000000 0x40000000>;
-			reusable;
-			linux,cma-default;
-		};
-	};
-
-
-	soc {
-		/*
-		 * Defined ranges:
-		 *   Common BCM283x peripherals
-		 *   BCM2711-specific peripherals
-		 *   ARM-local peripherals
-		 */
-		ranges = <0x7e000000  0x0 0xfe000000  0x01800000>,
-			 <0x7c000000  0x0 0xfc000000  0x02000000>,
-			 <0x40000000  0x0 0xff800000  0x00800000>;
-		/* Emulate a contiguous 30-bit address range for DMA */
-		dma-ranges = <0xc0000000  0x0 0x00000000  0x40000000>;
-
-		/*
-		 * This node is the provider for the enable-method for
-		 * bringing up secondary cores.
-		 */
-		local_intc: local_intc@40000000 {
-			compatible = "brcm,bcm2836-l1-intc";
-			reg = <0x40000000 0x100>;
-		};
-
-		gicv2: interrupt-controller@40041000 {
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "arm,gic-400";
-			reg =	<0x40041000 0x1000>,
-				<0x40042000 0x2000>,
-				<0x40044000 0x2000>,
-				<0x40046000 0x2000>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
-						 IRQ_TYPE_LEVEL_HIGH)>;
-		};
-
-		dma: dma@7e007000 {
-			compatible = "brcm,bcm2835-dma";
-			reg = <0x7e007000 0xb00>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-				     /* DMA lite 7 - 10 */
-				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "dma0",
-					  "dma1",
-					  "dma2",
-					  "dma3",
-					  "dma4",
-					  "dma5",
-					  "dma6",
-					  "dma7",
-					  "dma8",
-					  "dma9",
-					  "dma10";
-			#dma-cells = <1>;
-			brcm,dma-channel-mask = <0x07f5>;
-		};
-
-		pm: watchdog@7e100000 {
-			compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
-			#power-domain-cells = <1>;
-			#reset-cells = <1>;
-			reg = <0x7e100000 0x114>,
-			      <0x7e00a000 0x24>,
-			      <0x7ec11000 0x20>;
-			clocks = <&clocks BCM2835_CLOCK_V3D>,
-				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
-				 <&clocks BCM2835_CLOCK_H264>,
-				 <&clocks BCM2835_CLOCK_ISP>;
-			clock-names = "v3d", "peri_image", "h264", "isp";
-			system-power-controller;
-		};
-
-		rng@7e104000 {
-			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-
-			/* RNG is incompatible with brcm,bcm2835-rng */
-			status = "disabled";
-		};
-
-		uart2: serial@7e201400 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x7e201400 0x200>;
-			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_UART>,
-				 <&clocks BCM2835_CLOCK_VPU>;
-			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
-			status = "disabled";
-		};
-
-		uart3: serial@7e201600 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x7e201600 0x200>;
-			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_UART>,
-				 <&clocks BCM2835_CLOCK_VPU>;
-			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
-			status = "disabled";
-		};
-
-		uart4: serial@7e201800 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x7e201800 0x200>;
-			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_UART>,
-				 <&clocks BCM2835_CLOCK_VPU>;
-			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
-			status = "disabled";
-		};
-
-		uart5: serial@7e201a00 {
-			compatible = "arm,pl011", "arm,primecell";
-			reg = <0x7e201a00 0x200>;
-			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_UART>,
-				 <&clocks BCM2835_CLOCK_VPU>;
-			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
-			status = "disabled";
-		};
-
-		spi3: spi@7e204600 {
-			compatible = "brcm,bcm2835-spi";
-			reg = <0x7e204600 0x0200>;
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi4: spi@7e204800 {
-			compatible = "brcm,bcm2835-spi";
-			reg = <0x7e204800 0x0200>;
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi5: spi@7e204a00 {
-			compatible = "brcm,bcm2835-spi";
-			reg = <0x7e204a00 0x0200>;
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi6: spi@7e204c00 {
-			compatible = "brcm,bcm2835-spi";
-			reg = <0x7e204c00 0x0200>;
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c3: i2c@7e205600 {
-			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
-			reg = <0x7e205600 0x200>;
-			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c4: i2c@7e205800 {
-			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
-			reg = <0x7e205800 0x200>;
-			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c5: i2c@7e205a00 {
-			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
-			reg = <0x7e205a00 0x200>;
-			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c6: i2c@7e205c00 {
-			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
-			reg = <0x7e205c00 0x200>;
-			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		pwm1: pwm@7e20c800 {
-			compatible = "brcm,bcm2835-pwm";
-			reg = <0x7e20c800 0x28>;
-			clocks = <&clocks BCM2835_CLOCK_PWM>;
-			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
-			assigned-clock-rates = <10000000>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		emmc2: emmc2@7e340000 {
-			compatible = "brcm,bcm2711-emmc2";
-			reg = <0x7e340000 0x100>;
-			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2711_CLOCK_EMMC2>;
-			status = "disabled";
-		};
-
-		hvs@7e400000 {
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a72-pmu", "arm,armv8-pmuv3";
-		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
-					  IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
-					  IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
-					  IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
-					  IRQ_TYPE_LEVEL_LOW)>;
-		/* This only applies to the ARMv7 stub */
-		arm,cpu-registers-not-fw-configured;
-	};
-
-	cpus: cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a72";
-			reg = <0>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000d8>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a72";
-			reg = <1>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000e0>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a72";
-			reg = <2>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000e8>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a72";
-			reg = <3>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000f0>;
-		};
-	};
-
-	scb {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-
-		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>;
-
-		genet: ethernet@7d580000 {
-			compatible = "brcm,bcm2711-genet-v5";
-			reg = <0x0 0x7d580000 0x10000>;
-			#address-cells = <0x1>;
-			#size-cells = <0x1>;
-			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-
-			genet_mdio: mdio@e14 {
-				compatible = "brcm,genet-mdio-v5";
-				reg = <0xe14 0x8>;
-				reg-names = "mdio";
-				#address-cells = <0x0>;
-				#size-cells = <0x1>;
-			};
-		};
-	};
-};
-
-&clk_osc {
-	clock-frequency = <54000000>;
-};
-
-&clocks {
-	compatible = "brcm,bcm2711-cprman";
-};
-
-&cpu_thermal {
-	coefficients = <(-487) 410040>;
-};
-
-&dsi0 {
-	interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&dsi1 {
-	interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio {
-	compatible = "brcm,bcm2711-gpio";
-	interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-
-	gpclk0_gpio49: gpclk0_gpio49 {
-		pin-gpclk {
-			pins = "gpio49";
-			function = "alt1";
-			bias-disable;
-		};
-	};
-	gpclk1_gpio50: gpclk1_gpio50 {
-		pin-gpclk {
-			pins = "gpio50";
-			function = "alt1";
-			bias-disable;
-		};
-	};
-	gpclk2_gpio51: gpclk2_gpio51 {
-		pin-gpclk {
-			pins = "gpio51";
-			function = "alt1";
-			bias-disable;
-		};
-	};
-
-	i2c0_gpio46: i2c0_gpio46 {
-		pin-sda {
-			function = "alt0";
-			pins = "gpio46";
-			bias-pull-up;
-		};
-		pin-scl {
-			function = "alt0";
-			pins = "gpio47";
-			bias-disable;
-		};
-	};
-	i2c1_gpio46: i2c1_gpio46 {
-		pin-sda {
-			function = "alt1";
-			pins = "gpio46";
-			bias-pull-up;
-		};
-		pin-scl {
-			function = "alt1";
-			pins = "gpio47";
-			bias-disable;
-		};
-	};
-	i2c3_gpio2: i2c3_gpio2 {
-		pin-sda {
-			function = "alt5";
-			pins = "gpio2";
-			bias-pull-up;
-		};
-		pin-scl {
-			function = "alt5";
-			pins = "gpio3";
-			bias-disable;
-		};
-	};
-	i2c3_gpio4: i2c3_gpio4 {
-		pin-sda {
-			function = "alt5";
-			pins = "gpio4";
-			bias-pull-up;
-		};
-		pin-scl {
-			function = "alt5";
-			pins = "gpio5";
-			bias-disable;
-		};
-	};
-	i2c4_gpio6: i2c4_gpio6 {
-		pin-sda {
-			function = "alt5";
-			pins = "gpio6";
-			bias-pull-up;
-		};
-		pin-scl {
-			function = "alt5";
-			pins = "gpio7";
-			bias-disable;
-		};
-	};
-	i2c4_gpio8: i2c4_gpio8 {
-		pin-sda {
-			function = "alt5";
-			pins = "gpio8";
-			bias-pull-up;
-		};
-		pin-scl {
-			function = "alt5";
-			pins = "gpio9";
-			bias-disable;
-		};
-	};
-	i2c5_gpio10: i2c5_gpio10 {
-		pin-sda {
-			function = "alt5";
-			pins = "gpio10";
-			bias-pull-up;
-		};
-		pin-scl {
-			function = "alt5";
-			pins = "gpio11";
-			bias-disable;
-		};
-	};
-	i2c5_gpio12: i2c5_gpio12 {
-		pin-sda {
-			function = "alt5";
-			pins = "gpio12";
-			bias-pull-up;
-		};
-		pin-scl {
-			function = "alt5";
-			pins = "gpio13";
-			bias-disable;
-		};
-	};
-	i2c6_gpio0: i2c6_gpio0 {
-		pin-sda {
-			function = "alt5";
-			pins = "gpio0";
-			bias-pull-up;
-		};
-		pin-scl {
-			function = "alt5";
-			pins = "gpio1";
-			bias-disable;
-		};
-	};
-	i2c6_gpio22: i2c6_gpio22 {
-		pin-sda {
-			function = "alt5";
-			pins = "gpio22";
-			bias-pull-up;
-		};
-		pin-scl {
-			function = "alt5";
-			pins = "gpio23";
-			bias-disable;
-		};
-	};
-	i2c_slave_gpio8: i2c_slave_gpio8 {
-		pins-i2c-slave {
-			pins = "gpio8",
-			       "gpio9",
-			       "gpio10",
-			       "gpio11";
-			function = "alt3";
-		};
-	};
-
-	jtag_gpio48: jtag_gpio48 {
-		pins-jtag {
-			pins = "gpio48",
-			       "gpio49",
-			       "gpio50",
-			       "gpio51",
-			       "gpio52",
-			       "gpio53";
-			function = "alt4";
-		};
-	};
-
-	mii_gpio28: mii_gpio28 {
-		pins-mii {
-			pins = "gpio28",
-			       "gpio29",
-			       "gpio30",
-			       "gpio31";
-			function = "alt4";
-		};
-	};
-	mii_gpio36: mii_gpio36 {
-		pins-mii {
-			pins = "gpio36",
-			       "gpio37",
-			       "gpio38",
-			       "gpio39";
-			function = "alt5";
-		};
-	};
-
-	pcm_gpio50: pcm_gpio50 {
-		pins-pcm {
-			pins = "gpio50",
-			       "gpio51",
-			       "gpio52",
-			       "gpio53";
-			function = "alt2";
-		};
-	};
-
-	pwm0_0_gpio12: pwm0_0_gpio12 {
-		pin-pwm {
-			pins = "gpio12";
-			function = "alt0";
-			bias-disable;
-		};
-	};
-	pwm0_0_gpio18: pwm0_0_gpio18 {
-		pin-pwm {
-			pins = "gpio18";
-			function = "alt5";
-			bias-disable;
-		};
-	};
-	pwm1_0_gpio40: pwm1_0_gpio40 {
-		pin-pwm {
-			pins = "gpio40";
-			function = "alt0";
-			bias-disable;
-		};
-	};
-	pwm0_1_gpio13: pwm0_1_gpio13 {
-		pin-pwm {
-			pins = "gpio13";
-			function = "alt0";
-			bias-disable;
-		};
-	};
-	pwm0_1_gpio19: pwm0_1_gpio19 {
-		pin-pwm {
-			pins = "gpio19";
-			function = "alt5";
-			bias-disable;
-		};
-	};
-	pwm1_1_gpio41: pwm1_1_gpio41 {
-		pin-pwm {
-			pins = "gpio41";
-			function = "alt0";
-			bias-disable;
-		};
-	};
-	pwm0_1_gpio45: pwm0_1_gpio45 {
-		pin-pwm {
-			pins = "gpio45";
-			function = "alt0";
-			bias-disable;
-		};
-	};
-	pwm0_0_gpio52: pwm0_0_gpio52 {
-		pin-pwm {
-			pins = "gpio52";
-			function = "alt1";
-			bias-disable;
-		};
-	};
-	pwm0_1_gpio53: pwm0_1_gpio53 {
-		pin-pwm {
-			pins = "gpio53";
-			function = "alt1";
-			bias-disable;
-		};
-	};
-
-	rgmii_gpio35: rgmii_gpio35 {
-		pin-start-stop {
-			pins = "gpio35";
-			function = "alt4";
-		};
-		pin-rx-ok {
-			pins = "gpio36";
-			function = "alt4";
-		};
-	};
-	rgmii_irq_gpio34: rgmii_irq_gpio34 {
-		pin-irq {
-			pins = "gpio34";
-			function = "alt5";
-		};
-	};
-	rgmii_irq_gpio39: rgmii_irq_gpio39 {
-		pin-irq {
-			pins = "gpio39";
-			function = "alt4";
-		};
-	};
-	rgmii_mdio_gpio28: rgmii_mdio_gpio28 {
-		pins-mdio {
-			pins = "gpio28",
-			       "gpio29";
-			function = "alt5";
-		};
-	};
-	rgmii_mdio_gpio37: rgmii_mdio_gpio37 {
-		pins-mdio {
-			pins = "gpio37",
-			       "gpio38";
-			function = "alt4";
-		};
-	};
-
-	spi0_gpio46: spi0_gpio46 {
-		pins-spi {
-			pins = "gpio46",
-			       "gpio47",
-			       "gpio48",
-			       "gpio49";
-			function = "alt2";
-		};
-	};
-	spi2_gpio46: spi2_gpio46 {
-		pins-spi {
-			pins = "gpio46",
-			       "gpio47",
-			       "gpio48",
-			       "gpio49",
-			       "gpio50";
-			function = "alt5";
-		};
-	};
-	spi3_gpio0: spi3_gpio0 {
-		pins-spi {
-			pins = "gpio0",
-			       "gpio1",
-			       "gpio2",
-			       "gpio3";
-			function = "alt3";
-		};
-	};
-	spi4_gpio4: spi4_gpio4 {
-		pins-spi {
-			pins = "gpio4",
-			       "gpio5",
-			       "gpio6",
-			       "gpio7";
-			function = "alt3";
-		};
-	};
-	spi5_gpio12: spi5_gpio12 {
-		pins-spi {
-			pins = "gpio12",
-			       "gpio13",
-			       "gpio14",
-			       "gpio15";
-			function = "alt3";
-		};
-	};
-	spi6_gpio18: spi6_gpio18 {
-		pins-spi {
-			pins = "gpio18",
-			       "gpio19",
-			       "gpio20",
-			       "gpio21";
-			function = "alt3";
-		};
-	};
-
-	uart2_gpio0: uart2_gpio0 {
-		pin-tx {
-			pins = "gpio0";
-			function = "alt4";
-			bias-disable;
-		};
-		pin-rx {
-			pins = "gpio1";
-			function = "alt4";
-			bias-pull-up;
-		};
-	};
-	uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 {
-		pin-cts {
-			pins = "gpio2";
-			function = "alt4";
-			bias-pull-up;
-		};
-		pin-rts {
-			pins = "gpio3";
-			function = "alt4";
-			bias-disable;
-		};
-	};
-	uart3_gpio4: uart3_gpio4 {
-		pin-tx {
-			pins = "gpio4";
-			function = "alt4";
-			bias-disable;
-		};
-		pin-rx {
-			pins = "gpio5";
-			function = "alt4";
-			bias-pull-up;
-		};
-	};
-	uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 {
-		pin-cts {
-			pins = "gpio6";
-			function = "alt4";
-			bias-pull-up;
-		};
-		pin-rts {
-			pins = "gpio7";
-			function = "alt4";
-			bias-disable;
-		};
-	};
-	uart4_gpio8: uart4_gpio8 {
-		pin-tx {
-			pins = "gpio8";
-			function = "alt4";
-			bias-disable;
-		};
-		pin-rx {
-			pins = "gpio9";
-			function = "alt4";
-			bias-pull-up;
-		};
-	};
-	uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 {
-		pin-cts {
-			pins = "gpio10";
-			function = "alt4";
-			bias-pull-up;
-		};
-		pin-rts {
-			pins = "gpio11";
-			function = "alt4";
-			bias-disable;
-		};
-	};
-	uart5_gpio12: uart5_gpio12 {
-		pin-tx {
-			pins = "gpio12";
-			function = "alt4";
-			bias-disable;
-		};
-		pin-rx {
-			pins = "gpio13";
-			function = "alt4";
-			bias-pull-up;
-		};
-	};
-	uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 {
-		pin-cts {
-			pins = "gpio14";
-			function = "alt4";
-			bias-pull-up;
-		};
-		pin-rts {
-			pins = "gpio15";
-			function = "alt4";
-			bias-disable;
-		};
-	};
-};
-
-&i2c0 {
-	compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
-	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&i2c1 {
-	compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
-	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&mailbox {
-	interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&sdhci {
-	interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&sdhost {
-	interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&spi {
-	interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&spi1 {
-	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&spi2 {
-	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&system_timer {
-	interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&txp {
-	interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart0 {
-	interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart1 {
-	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usb {
-	interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&vec {
-	interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
-};
--- a/arch/arm/boot/dts/bcm2838-rpi.dtsi
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-/ {
-	soc {
-		/delete-node/ mailbox@7e00b840;
-	};
-};
-
-&scb {
-	vchiq: mailbox@7e00b840 {
-		compatible = "brcm,bcm2838-vchiq";
-		reg = <0 0x7e00b840 0x3c>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
-
-&dma {
-	/* The VPU firmware uses DMA channel 11 for VCHIQ */
-	brcm,dma-channel-mask = <0x1f5>;
-};
-
-&dma40 {
-	/* The VPU firmware DMA channel 11 for VCHIQ */
-	brcm,dma-channel-mask = <0x7000>;
-};
--- a/arch/arm/boot/dts/bcm2838.dtsi
+++ /dev/null
@@ -1,733 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "bcm283x.dtsi"
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/soc/bcm2835-pm.h>
-
-/ {
-	compatible = "brcm,bcm2838";
-
-	#address-cells = <2>;
-	#size-cells = <1>;
-
-	interrupt-parent = <&gicv2>;
-
-	soc {
-		ranges = <0x7e000000  0x0 0xfe000000  0x01800000>,
-			 <0x7c000000  0x0 0xfc000000  0x02000000>,
-			 <0x40000000  0x0 0xff800000  0x00800000>;
-		/* Emulate a contiguous 30-bit address range for DMA */
-		dma-ranges = <0xc0000000  0x0 0x00000000  0x3c000000>;
-
-		/delete-node/ interrupt-controller@7e00f300;
-		/delete-node/ v3d@7ec00000;
-
-		local_intc: local_intc@40000000 {
-			compatible = "brcm,bcm2836-l1-intc";
-			reg = <0x40000000 0x100>;
-		};
-
-		gicv2: interrupt-controller@40041000 {
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "arm,gic-400";
-			reg =	<0x40041000 0x1000>,
-				<0x40042000 0x2000>,
-				<0x40044000 0x2000>,
-				<0x40046000 0x2000>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
-						 IRQ_TYPE_LEVEL_HIGH)>;
-		};
-
-		thermal: thermal@7d5d2200 {
-			compatible = "brcm,avs-tmon-bcm2838";
-			reg = <0x7d5d2200 0x2c>;
-			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "tmon";
-			clocks = <&clocks BCM2835_CLOCK_TSENS>;
-			#thermal-sensor-cells = <0>;
-			status = "okay";
-		};
-
-		pm: watchdog@7e100000 {
-			reg = <0x7e100000 0x114>,
-			      <0x7e00a000 0x24>,
-			      <0x7ec11000 0x20>;
-		};
-
-		rng@7e104000 {
-			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		uart2: serial@7e201400 {
-			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
-			reg = <0x7e201400 0x200>;
-			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_UART>,
-				 <&clocks BCM2835_CLOCK_VPU>;
-			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
-			status = "disabled";
-		};
-
-		uart3: serial@7e201600 {
-			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
-			reg = <0x7e201600 0x200>;
-			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_UART>,
-				 <&clocks BCM2835_CLOCK_VPU>;
-			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
-			status = "disabled";
-		};
-
-		uart4: serial@7e201800 {
-			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
-			reg = <0x7e201800 0x200>;
-			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_UART>,
-				 <&clocks BCM2835_CLOCK_VPU>;
-			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
-			status = "disabled";
-		};
-
-		uart5: serial@7e201a00 {
-			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
-			reg = <0x7e201a00 0x200>;
-			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_UART>,
-				 <&clocks BCM2835_CLOCK_VPU>;
-			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
-			status = "disabled";
-		};
-
-		spi@7e204000 {
-			reg = <0x7e204000 0x0200>;
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		spi3: spi@7e204600 {
-			compatible = "brcm,bcm2835-spi";
-			reg = <0x7e204600 0x0200>;
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi4: spi@7e204800 {
-			compatible = "brcm,bcm2835-spi";
-			reg = <0x7e204800 0x0200>;
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi5: spi@7e204a00 {
-			compatible = "brcm,bcm2835-spi";
-			reg = <0x7e204a00 0x0200>;
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi6: spi@7e204c00 {
-			compatible = "brcm,bcm2835-spi";
-			reg = <0x7e204c00 0x0200>;
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c3: i2c@7e205600 {
-			compatible = "brcm,bcm2835-i2c";
-			reg = <0x7e205600 0x200>;
-			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c4: i2c@7e205800 {
-			compatible = "brcm,bcm2835-i2c";
-			reg = <0x7e205800 0x200>;
-			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c5: i2c@7e205a00 {
-			compatible = "brcm,bcm2835-i2c";
-			reg = <0x7e205a00 0x200>;
-			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c6: i2c@7e205c00 {
-			compatible = "brcm,bcm2835-i2c";
-			reg = <0x7e205c00 0x200>;
-			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		pwm1: pwm@7e20c800 {
-			compatible = "brcm,bcm2835-pwm";
-			reg = <0x7e20c800 0x28>;
-			clocks = <&clocks BCM2835_CLOCK_PWM>;
-			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
-			assigned-clock-rates = <10000000>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		emmc2: emmc2@7e340000 {
-			compatible = "brcm,bcm2711-emmc2";
-			status = "okay";
-			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clocks BCM2711_CLOCK_EMMC2>;
-			reg = <0x7e340000 0x100>;
-		};
-
-		hvs@7e400000 {
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a72-pmu";
-		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
-					  IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
-					  IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
-					  IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
-					  IRQ_TYPE_LEVEL_LOW)>;
-		arm,cpu-registers-not-fw-configured;
-	};
-
-	cpus: cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a72";
-			reg = <0>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000d8>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a72";
-			reg = <1>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000e0>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a72";
-			reg = <2>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000e8>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a72";
-			reg = <3>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000f0>;
-		};
-	};
-
-	v3dbus {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <2>;
-		ranges = <0x7c500000  0x0 0xfc500000  0x0 0x03300000>,
-			 <0x40000000  0x0 0xff800000  0x0 0x00800000>;
-		dma-ranges = <0x00000000  0x0 0x00000000  0x4 0x00000000>;
-
-		v3d: v3d@7ec04000 {
-			compatible = "brcm,2711-v3d";
-			reg =
-			    <0x7ec00000 0x0 0x4000>,
-			    <0x7ec04000 0x0 0x4000>;
-			reg-names = "hub", "core0";
-
-			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
-			resets = <&pm BCM2835_RESET_V3D>;
-			clocks = <&clocks BCM2835_CLOCK_V3D>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			status = "okay";
-		};
-	};
-
-	scb: scb {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-
-		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>,
-			 <0x0 0x40000000  0x0 0xff800000  0x00800000>,
-			 <0x6 0x00000000  0x6 0x00000000  0x40000000>,
-			 <0x0 0x00000000  0x0 0x00000000  0xfc000000>;
-		dma-ranges = <0x0 0x00000000  0x0 0x00000000  0xfc000000>;
-
-		pcie_0: pcie@7d500000 {
-			reg = <0x0 0x7d500000 0x9310>,
-			      <0x0 0x7e00f300 0x20>;
-			msi-controller;
-			msi-parent = <&pcie_0>;
-			#address-cells = <3>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			bus-range = <0x0 0x01>;
-			compatible = "brcm,bcm2711b0-pcie", // Safe value
-				     "brcm,bcm2711-pcie",
-				     "brcm,pci-plat-dev";
-			max-link-speed = <2>;
-			tot-num-pcie = <1>;
-			linux,pci-domain = <0>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "pcie", "msi";
-			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
-						IRQ_TYPE_LEVEL_HIGH
-					 0 0 0 2 &gicv2 GIC_SPI 144
-						IRQ_TYPE_LEVEL_HIGH
-					 0 0 0 3 &gicv2 GIC_SPI 145
-						IRQ_TYPE_LEVEL_HIGH
-					 0 0 0 4 &gicv2 GIC_SPI 146
-						IRQ_TYPE_LEVEL_HIGH>;
-
-			/* Map outbound accesses from scb:0x6_00000000-03ffffff
-			 * to pci:0x0_f8000000-fbffffff
-			 */
-			ranges = <0x02000000 0x0 0xf8000000  0x6 0x00000000
-				  0x0 0x04000000>;
-			/* Map inbound accesses from pci:0x0_00000000..ffffffff
-			 * to scb:0x0_00000000-ffffffff
-			 */
-			dma-ranges = <0x02000000 0x0 0x00000000  0x0 0x00000000
-				      0x1 0x00000000>;
-			status = "okay";
-		};
-
-		genet: ethernet@7d580000 {
-			compatible = "brcm,bcm2711-genet-v5", "brcm,genet-v5";
-			reg = <0x0 0x7d580000 0x10000>;
-			#address-cells = <0x1>;
-			#size-cells = <0x1>;
-			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-
-			genet_mdio: mdio@e14 {
-				#address-cells = <0x0>;
-				#size-cells = <0x1>;
-				compatible = "brcm,genet-mdio-v5";
-				reg = <0xe14 0x8>;
-				reg-names = "mdio";
-			};
-		};
-
-		dma40: dma@7e007b00 {
-			compatible = "brcm,bcm2838-dma";
-			reg = <0x0 0x7e007b00 0x400>;
-			interrupts =
-				<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, /* dma4 11 */
-				<GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, /* dma4 12 */
-				<GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, /* dma4 13 */
-				<GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; /* dma4 14 */
-			interrupt-names = "dma11",
-				"dma12",
-				"dma13",
-				"dma14";
-			#dma-cells = <1>;
-			brcm,dma-channel-mask = <0x7800>;
-		};
-		/* DMA4 - 40 bit DMA engines */
-
-		xhci: xhci@7e9c0000 {
-			compatible = "generic-xhci";
-			status = "disabled";
-			reg = <0x0 0x7e9c0000 0x100000>;
-			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		hevc-decoder@7eb00000 {
-			compatible = "raspberrypi,rpivid-hevc-decoder";
-			reg = <0x0 0x7eb00000 0x10000>;
-			status = "okay";
-		};
-
-		rpivid-local-intc@7eb10000 {
-			compatible = "raspberrypi,rpivid-local-intc";
-			reg = <0x0 0x7eb10000 0x1000>;
-			status = "okay";
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		h264-decoder@7eb20000 {
-			compatible = "raspberrypi,rpivid-h264-decoder";
-			reg = <0x0 0x7eb20000 0x10000>;
-			status = "okay";
-		};
-
-		vp9-decoder@7eb30000 {
-			compatible = "raspberrypi,rpivid-vp9-decoder";
-			reg = <0x0 0x7eb30000 0x10000>;
-			status = "okay";
-		};
-	};
-};
-
-&clk_osc {
-	clock-frequency = <54000000>;
-};
-
-&clocks {
-	compatible = "brcm,bcm2711-cprman";
-};
-
-&cpu_thermal {
-	coefficients = <(-487)  410040>;
-};
-
-&dsi0 {
-	interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&dsi1 {
-	interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio {
-	compatible = "brcm,bcm2711-gpio", "brcm,bcm2835-gpio";
-
-	gpclk0_gpio49: gpclk0_gpio49 {
-		brcm,pins = <49>;
-		brcm,function = <BCM2835_FSEL_ALT1>;
-		brcm,pull = <BCM2835_PUD_OFF>;
-	};
-	gpclk1_gpio50: gpclk1_gpio50 {
-		brcm,pins = <50>;
-		brcm,function = <BCM2835_FSEL_ALT1>;
-		brcm,pull = <BCM2835_PUD_OFF>;
-	};
-	gpclk2_gpio51: gpclk2_gpio51 {
-		brcm,pins = <51>;
-		brcm,function = <BCM2835_FSEL_ALT1>;
-		brcm,pull = <BCM2835_PUD_OFF>;
-	};
-
-	i2c0_gpio46: i2c0_gpio46 {
-		brcm,pins = <46 47>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-	i2c1_gpio46: i2c1_gpio46 {
-		brcm,pins = <46 47>;
-		brcm,function = <BCM2835_FSEL_ALT1>;
-	};
-	i2c3_gpio2: i2c3_gpio2 {
-		brcm,pins = <2 3>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-	};
-	i2c3_gpio4: i2c3_gpio4 {
-		brcm,pins = <4 5>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-	};
-	i2c4_gpio6: i2c4_gpio6 {
-		brcm,pins = <6 7>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-	};
-	i2c4_gpio8: i2c4_gpio8 {
-		brcm,pins = <8 9>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-	};
-	i2c5_gpio10: i2c5_gpio10 {
-		brcm,pins = <10 11>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-	};
-	i2c5_gpio12: i2c5_gpio12 {
-		brcm,pins = <12 13>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-	};
-	i2c6_gpio0: i2c6_gpio0 {
-		brcm,pins = <0 1>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-	};
-	i2c6_gpio22: i2c6_gpio22 {
-		brcm,pins = <22 23>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-	};
-	i2c_slave_gpio8: i2c_slave_gpio8 {
-		brcm,pins = <8 9 10 11>;
-		brcm,function = <BCM2835_FSEL_ALT3>;
-	};
-
-	jtag_gpio48: jtag_gpio48 {
-		brcm,pins = <48 49 50 51 52 53>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-	};
-
-	mii_gpio28: mii_gpio28 {
-		brcm,pins = <28 29 30 31>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-	};
-	mii_gpio36: mii_gpio36 {
-		brcm,pins = <36 37 38 39>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-	};
-
-	pcm_gpio50: pcm_gpio50 {
-		brcm,pins = <50 51 52 53>;
-		brcm,function = <BCM2835_FSEL_ALT2>;
-	};
-
-	pwm0_gpio52: pwm0_gpio52 {
-		brcm,pins = <52>;
-		brcm,function = <BCM2835_FSEL_ALT1>;
-		brcm,pull = <BCM2835_PUD_OFF>;
-	};
-	pwm1_gpio53: pwm1_gpio53 {
-		brcm,pins = <53>;
-		brcm,function = <BCM2835_FSEL_ALT1>;
-		brcm,pull = <BCM2835_PUD_OFF>;
-	};
-
-	/* The following group consists of:
-         *  RGMII_START_STOP
-         *  RGMII_RX_OK
-         */
-	rgmii_gpio35: rgmii_gpio35 {
-		brcm,pins = <35 36>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-	};
-	rgmii_irq_gpio34: rgmii_irq_gpio34 {
-		brcm,pins = <34>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-	};
-	rgmii_irq_gpio39: rgmii_irq_gpio39 {
-		brcm,pins = <39>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-	};
-	rgmii_mdio_gpio28: rgmii_mdio_gpio28 {
-		brcm,pins = <28 29>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-	};
-	rgmii_mdio_gpio37: rgmii_mdio_gpio37 {
-		brcm,pins = <37 38>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-	};
-
-	spi0_gpio46: spi0_gpio46 {
-		brcm,pins = <46 47 48 49>;
-		brcm,function = <BCM2835_FSEL_ALT2>;
-	};
-	spi2_gpio46: spi2_gpio46 {
-		brcm,pins = <46 47 48 49 50>;
-		brcm,function = <BCM2835_FSEL_ALT5>;
-	};
-	spi3_gpio0: spi3_gpio0 {
-		brcm,pins = <0 1 2 3>;
-		brcm,function = <BCM2835_FSEL_ALT3>;
-	};
-	spi4_gpio4: spi4_gpio4 {
-		brcm,pins = <4 5 6 7>;
-		brcm,function = <BCM2835_FSEL_ALT3>;
-	};
-	spi5_gpio12: spi5_gpio12 {
-		brcm,pins = <12 13 14 15>;
-		brcm,function = <BCM2835_FSEL_ALT3>;
-	};
-	spi6_gpio18: spi6_gpio18 {
-		brcm,pins = <18 19 20 21>;
-		brcm,function = <BCM2835_FSEL_ALT3>;
-	};
-
-	uart2_gpio0: uart2_gpio0 {
-		brcm,pins = <0 1>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-		brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
-	};
-	uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 {
-		brcm,pins = <2 3>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-		brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
-	};
-	uart3_gpio4: uart3_gpio4 {
-		brcm,pins = <4 5>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-		brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
-	};
-	uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 {
-		brcm,pins = <6 7>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-		brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
-	};
-	uart4_gpio8: uart4_gpio8 {
-		brcm,pins = <8 9>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-		brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
-	};
-	uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 {
-		brcm,pins = <10 11>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-		brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
-	};
-	uart5_gpio12: uart5_gpio12 {
-		brcm,pins = <12 13>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-		brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
-	};
-	uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 {
-		brcm,pins = <14 15>;
-		brcm,function = <BCM2835_FSEL_ALT4>;
-		brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
-	};
-};
-
-&vec {
-	interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usb {
-	interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-	status = "disabled";
-};
-
-&hdmi {
-	interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart1 {
-	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&spi1 {
-	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&spi2 {
-	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&csi0 {
-	interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&csi1 {
-	interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&sdhci {
-	interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&i2c0 {
-	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&i2c1 {
-	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&i2c2 {
-	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio {
-	interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&mailbox {
-	interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&rng {
-	compatible = "brcm,bcm2711-rng200", "brcm,bcm2838-rng200";
-};
-
-&sdhost {
-	interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&system_timer {
-	interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart0 {
-	interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&dma {
-	reg = <0x7e007000 0xb00>;
-	interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
-		<GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
-		<GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
-		<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
-		<GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
-		<GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-		<GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
-		<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, /* dmalite  7 */
-		<GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, /* dmalite  8 */
-		<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, /* dmalite  9 */
-		<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; /* dmalite 10 */
-	interrupt-names = "dma0",
-			  "dma1",
-			  "dma2",
-			  "dma3",
-			  "dma4",
-			  "dma5",
-			  "dma6",
-			  "dma7",
-			  "dma8",
-			  "dma9",
-			  "dma10";
-	brcm,dma-channel-mask = <0x07f5>;
-};
-
-&txp {
-	interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-};