From bd8e59b0456870997fb917bcd3b3b696e78d4ac2 Mon Sep 17 00:00:00 2001 From: 6by9 <6by9@users.noreply.github.com> Date: Mon, 19 Jun 2023 16:02:36 +0100 Subject: [PATCH] dtoverlays: Fix pitft[28|35] overlays for 6.1 driver change. (#5508) The overlays configured both irq-gpio and an interrupts/ interrupt-parent configuration for the stmpe MFD device. irq-gpio was reworked in 6.1 and has issues with the configuration as provided. Removing it and using the interrupts/interrupt-parent configuration works fine, so do that. See: https://forums.raspberrypi.com/viewtopic.php?t=351394 Signed-off-by: Dave Stevenson --- arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts | 1 - arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts | 1 - 2 files changed, 2 deletions(-) --- a/arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts +++ b/arch/arm/boot/dts/overlays/pitft28-resistive-overlay.dts @@ -68,7 +68,6 @@ reg = <1>; spi-max-frequency = <500000>; - irq-gpio = <&gpio 24 0x2>; /* IRQF_TRIGGER_FALLING */ interrupts = <24 2>; /* high-to-low edge triggered */ interrupt-parent = <&gpio>; interrupt-controller; --- a/arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts +++ b/arch/arm/boot/dts/overlays/pitft35-resistive-overlay.dts @@ -68,7 +68,6 @@ reg = <1>; spi-max-frequency = <500000>; - irq-gpio = <&gpio 24 0x2>; /* IRQF_TRIGGER_FALLING */ interrupts = <24 2>; /* high-to-low edge triggered */ interrupt-parent = <&gpio>; interrupt-controller;