From 9ec0a800c8e0850e1358b7402d6af557af81cb38 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= Date: Tue, 6 Feb 2024 01:08:03 +0300 Subject: [PATCH 31/48] net: dsa: mt7530: move XTAL check to mt7530_setup() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The crystal frequency concerns the switch core. The frequency should be checked when the switch is being set up so the driver can reject the unsupported hardware earlier and without requiring port 6 to be used. Move it to mt7530_setup(). Drop the unnecessary function printing. Reviewed-by: Andrew Lunn Reviewed-by: Vladimir Oltean Reviewed-by: Russell King (Oracle) Signed-off-by: Arınç ÜNAL Link: https://lore.kernel.org/r/20240206-for-netnext-mt7530-improvements-2-v5-2-d7d92a185cb1@arinc9.com Signed-off-by: Jakub Kicinski --- drivers/net/dsa/mt7530.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -422,13 +422,6 @@ mt7530_pad_clk_setup(struct dsa_switch * xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK; - if (xtal == HWTRAP_XTAL_20MHZ) { - dev_err(priv->dev, - "%s: MT7530 with a 20MHz XTAL is not supported!\n", - __func__); - return -EINVAL; - } - switch (interface) { case PHY_INTERFACE_MODE_RGMII: trgint = 0; @@ -2461,6 +2454,12 @@ mt7530_setup(struct dsa_switch *ds) return -ENODEV; } + if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_20MHZ) { + dev_err(priv->dev, + "MT7530 with a 20MHz XTAL is not supported!\n"); + return -EINVAL; + } + /* Reset the switch through internal reset */ mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |