// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "qca953x.dtsi" #include #include #include / { model = "ASUS RP-AC51"; compatible = "asus,rp-ac51", "qca,qca9531"; aliases { led-boot = &led_wps; led-failsafe = &led_wps; led-running = &led_wps; led-upgrade = &led_wps; label-mac-device = ð0; }; keys { compatible = "gpio-keys"; wps { linux,code = ; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; reset { linux,code = ; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; }; leds { compatible = "gpio-leds"; led_power: power { function = LED_FUNCTION_POWER; color = ; gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; }; led_wps: wps { function = LED_FUNCTION_WPS; color = ; gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; }; lan { function = LED_FUNCTION_LAN; color = ; gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; }; wlan2g { label = "blue:wlan2g"; gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; }; wlan5g { label = "blue:wlan5g"; gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; }; }; }; &pcie0 { status = "okay"; wifi@0,0 { compatible = "qcom,ath10k"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&precal_art_5000>; nvmem-cell-names = "pre-calibration"; }; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x000000 0x40000>; read-only; }; partition@40000 { label = "u-boot-env"; reg = <0x040000 0x10000>; read-only; }; partition@50000 { label = "art"; reg = <0x050000 0x10000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_art_0: macaddr@0 { reg = <0x0 0x6>; }; macaddr_art_1002: macaddr@1002 { reg = <0x1002 0x6>; }; precal_art_5000: pre-calibration@5000 { reg = <0x5000 0x2f20>; }; }; }; partition@60000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x060000 0xfa0000>; }; }; }; }; ð0 { status = "okay"; phy-handle = <&swphy4>; nvmem-cells = <&macaddr_art_0>; nvmem-cell-names = "mac-address"; }; ð1 { nvmem-cells = <&macaddr_art_1002>; nvmem-cell-names = "mac-address"; }; &wmac { status = "okay"; qca,no-eeprom; };