From dcb717bc899cd55a969fb4f1f8526f313efe148c Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Fri, 5 May 2023 11:25:48 +0100
Subject: [PATCH] pinctrl: bcm2835: Workaround for edge IRQ loss

It has been observed that edge events can be lost when GPIO edges occur
close to each other. Investigation suggests this is due to a hardware
bug, although no mechanism has been identified.

Work around the event loss by moving the IRQ acknowledgement into the
main ISR, adding missing events by explicit level-change detection.

See: https://forums.raspberrypi.com/viewtopic.php?t=350295

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
 drivers/pinctrl/bcm/pinctrl-bcm2835.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -420,15 +420,32 @@ static void bcm2835_gpio_irq_handle_bank
 	unsigned long events;
 	unsigned offset;
 	unsigned gpio;
+	u32 levs, levs2;
 
 	events = bcm2835_gpio_rd(pc, GPEDS0 + bank * 4);
+	levs = bcm2835_gpio_rd(pc, GPLEV0 + bank * 4);
 	events &= mask;
 	events &= pc->enabled_irq_map[bank];
+	bcm2835_gpio_wr(pc, GPEDS0 + bank * 4, events);
+
+retry:
 	for_each_set_bit(offset, &events, 32) {
 		gpio = (32 * bank) + offset;
 		generic_handle_domain_irq(pc->gpio_chip.irq.domain,
 					  gpio);
 	}
+	events = bcm2835_gpio_rd(pc, GPEDS0 + bank * 4);
+	levs2 = bcm2835_gpio_rd(pc, GPLEV0 + bank * 4);
+
+	events |= levs2 & ~levs & bcm2835_gpio_rd(pc, GPREN0 + bank * 4);
+	events |= ~levs2 & levs & bcm2835_gpio_rd(pc, GPFEN0 + bank * 4);
+	events &= mask;
+	events &= pc->enabled_irq_map[bank];
+	if (events) {
+		bcm2835_gpio_wr(pc, GPEDS0 + bank * 4, events);
+		levs = levs2;
+		goto retry;
+	}
 }
 
 static void bcm2835_gpio_irq_handler(struct irq_desc *desc)
@@ -668,11 +685,7 @@ static int bcm2835_gpio_irq_set_type(str
 
 static void bcm2835_gpio_irq_ack(struct irq_data *data)
 {
-	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
-	struct bcm2835_pinctrl *pc = gpiochip_get_data(chip);
-	unsigned gpio = irqd_to_hwirq(data);
-
-	bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
+	/* Nothing to do - the main interrupt handler includes the ACK */
 }
 
 static int bcm2835_gpio_irq_set_wake(struct irq_data *data, unsigned int on)