From 50adadfaf324ed5cbb59ce2b85eda59de4e3801a Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Fri, 4 Dec 2020 15:20:36 +0000 Subject: [PATCH] i2c: designware: Add SMBUS quick command support The SMBUS emulation code turns an SMBUS quick command into a zero- length read. This controller can't do zero length accesses, but it can do quick commands, so reverse the emulation. The alternative would be to properly implement the SMBUS support but that is a lot more work, and unnecessary just to get i2cdetect working. Signed-off-by: Phil Elwell --- drivers/i2c/busses/i2c-designware-core.h | 2 ++ drivers/i2c/busses/i2c-designware-master.c | 17 +++++++++++++++-- 2 files changed, 17 insertions(+), 2 deletions(-) --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -117,7 +117,9 @@ #define DW_IC_ERR_TX_ABRT 0x1 +#define DW_IC_TAR_SPECIAL BIT(11) #define DW_IC_TAR_10BITADDR_MASTER BIT(12) +#define DW_IC_TAR_SMBUS_QUICK_CMD BIT(16) #define DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH (BIT(2) | BIT(3)) #define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK GENMASK(3, 2) --- a/drivers/i2c/busses/i2c-designware-master.c +++ b/drivers/i2c/busses/i2c-designware-master.c @@ -228,6 +228,10 @@ static void i2c_dw_xfer_init(struct dw_i ic_tar = DW_IC_TAR_10BITADDR_MASTER; } + /* Convert a zero-length read into an SMBUS quick command */ + if (!msgs[dev->msg_write_idx].len) + ic_tar = DW_IC_TAR_SPECIAL | DW_IC_TAR_SMBUS_QUICK_CMD; + regmap_update_bits(dev->map, DW_IC_CON, DW_IC_CON_10BITADDR_MASTER, ic_con); @@ -409,6 +413,14 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) regmap_read(dev->map, DW_IC_RXFLR, &flr); rx_limit = dev->rx_fifo_depth - flr; + /* Handle SMBUS quick commands */ + if (!buf_len) { + if (msgs[dev->msg_write_idx].flags & I2C_M_RD) + regmap_write(dev->map, DW_IC_DATA_CMD, 0x300); + else + regmap_write(dev->map, DW_IC_DATA_CMD, 0x200); + } + while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) { u32 cmd = 0; @@ -673,7 +685,7 @@ static const struct i2c_algorithm i2c_dw }; static const struct i2c_adapter_quirks i2c_dw_quirks = { - .flags = I2C_AQ_NO_ZERO_LEN, + .flags = 0, }; static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev) @@ -813,7 +825,8 @@ void i2c_dw_configure_master(struct dw_i { struct i2c_timings *t = &dev->timings; - dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY; + dev->functionality = I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_QUICK | + DW_IC_DEFAULT_FUNCTIONALITY; dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE | DW_IC_CON_RESTART_EN;