// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "qca955x.dtsi" #include #include #include / { compatible = "extreme-networks,ws-ap3805i", "qca,qca9557"; model = "Extreme Networks WS-AP3805i"; aliases { led-boot = &led_power_green; led-failsafe = &led_power_amber; led-running = &led_power_green; led-upgrade = &led_power_amber; label-mac-device = ð0; }; leds { compatible = "gpio-leds"; led_power_green: power_green { function = LED_FUNCTION_POWER; color = ; gpios = <&gpio 19 GPIO_ACTIVE_LOW>; }; led_power_amber: power_amber { function = LED_FUNCTION_POWER; color = ; gpios = <&gpio 23 GPIO_ACTIVE_LOW>; }; wlan5 { label = "green:wlan5"; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; wlan2 { label = "green:wlan2"; gpios = <&gpio 22 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy1tpt"; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; linux,code = ; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; }; }; watchdog { compatible = "linux,wdt-gpio"; gpios = <&gpio 16 GPIO_ACTIVE_LOW>; hw_algo = "toggle"; hw_margin_ms = <20000>; always-running; }; }; &wdt { status = "disabled"; }; &wmac { status = "okay"; qca,no-eeprom; }; &pcie0 { status = "okay"; wifi@0,0 { compatible = "qcom,ath10k"; reg = <0x0 0 0 0 0>; nvmem-cells = <&cal_art_5000>; nvmem-cell-names = "calibration"; }; }; &mdio0 { status = "okay"; phy5: ethernet-phy@5 { reg = <5>; }; }; ð0 { status = "okay"; phy-handle = <&phy5>; phy-mode = "rgmii-id"; pll-data = <0x82000000 0x80000101 0x80001313>; gmac-config { device = <&gmac>; rgmii-enabled = <1>; }; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; m25p,fast-read; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot-bak"; reg = <0x0 0x80000>; read-only; }; partition@80000 { label = "u-boot"; reg = <0x080000 0x80000>; read-only; }; partition@100000 { label = "cfg1"; reg = <0x100000 0x40000>; read-only; }; partition@140000 { label = "cfg2"; reg = <0x140000 0x40000>; read-only; }; partition@180000 { label = "nvram4"; reg = <0x180000 0x40000>; read-only; }; partition@1c0000 { label = "nvram3"; reg = <0x1c0000 0x40000>; read-only; }; partition@200000 { label = "nvram2"; reg = <0x200000 0x40000>; read-only; }; partition@240000 { label = "nvram1"; reg = <0x240000 0x40000>; read-only; }; partition@280000 { label = "PriImg"; reg = <0x280000 0x1000000>; read-only; }; partition@1280000 { label = "SecImg"; reg = <0x1280000 0x1000000>; read-only; }; partition@2280000 { label = "firmware"; compatible = "denx,uimage"; reg = <0x2280000 0x1cc0000>; }; partition@3f40000 { label = "cert"; reg = <0x3f40000 0x80000>; read-only; }; partition@3fc0000 { label = "art"; reg = <0x3fc0000 0x40000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; cal_art_5000: calibration@5000 { reg = <0x5000 0x844>; }; }; }; }; }; };