From 649bb7845e30805c66f62fc5725c4dbf350f21cb Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Thu, 26 Aug 2021 22:26:40 -0500 Subject: [PATCH 10/90] sunxi: Remove obsolete USBx_VBUS_PIN Kconfig symbols Now that the USB PHY driver uses the device tree to get VBUS supply regulators, these Kconfig symbols are unused. Remove them. Signed-off-by: Samuel Holland --- arch/arm/mach-sunxi/Kconfig | 29 ----------------------------- 1 file changed, 29 deletions(-) --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -693,13 +693,6 @@ config MMC_SUNXI_SLOT_EXTRA slot or emmc on mmc1 - mmc3. Setting this to 1, 2 or 3 will enable support for this. -config USB0_VBUS_PIN - string "Vbus enable pin for usb0 (otg)" - default "" - ---help--- - Set the Vbus enable pin for usb0 (otg). This takes a string in the - format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. - config USB0_VBUS_DET string "Vbus detect pin for usb0 (otg)" default "" @@ -714,28 +707,6 @@ config USB0_ID_DET Set the ID detect pin for usb0 (otg). This takes a string in the format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. -config USB1_VBUS_PIN - string "Vbus enable pin for usb1 (ehci0)" - default "PH6" if MACH_SUN4I || MACH_SUN7I - default "PH27" if MACH_SUN6I - ---help--- - Set the Vbus enable pin for usb1 (ehci0, usb0 is the otg). This takes - a string in the format understood by sunxi_name_to_gpio, e.g. - PH1 for pin 1 of port H. - -config USB2_VBUS_PIN - string "Vbus enable pin for usb2 (ehci1)" - default "PH3" if MACH_SUN4I || MACH_SUN7I - default "PH24" if MACH_SUN6I - ---help--- - See USB1_VBUS_PIN help text. - -config USB3_VBUS_PIN - string "Vbus enable pin for usb3 (ehci2)" - default "" - ---help--- - See USB1_VBUS_PIN help text. - config I2C0_ENABLE bool "Enable I2C/TWI controller 0" default y if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I_R40