// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /dts-v1/; #include #include #include #include "mt7981.dtsi" / { model = "OpenEmbed SOM7981"; compatible = "openembed,som7981", "mediatek,mt7981"; aliases { led-boot = &act_led; led-failsafe = &act_led; led-running = &act_led; led-upgrade = &act_led; serial0 = &uart0; }; chosen { stdout-path = "serial0:115200n8"; }; memory@40000000 { reg = <0 0x40000000 0 0x40000000>; }; beeper { compatible = "gpio-beeper"; gpios = <&pio 2 GPIO_ACTIVE_HIGH>; }; gpio-keys { compatible = "gpio-keys"; button-reset { label = "reset"; linux,code = ; gpios = <&pio 1 GPIO_ACTIVE_LOW>; }; }; gpio-leds { compatible = "gpio-leds"; led-0 { function = LED_FUNCTION_LAN; color = ; gpios = <&pio 8 GPIO_ACTIVE_LOW>; }; led-1 { function = LED_FUNCTION_LAN; color = ; gpios = <&pio 13 GPIO_ACTIVE_LOW>; }; led-2 { function = LED_FUNCTION_PANIC; color = ; gpios = <&pio 34 GPIO_ACTIVE_LOW>; panic-indicator; }; act_led: led-3 { function = LED_FUNCTION_ACTIVITY; color = ; gpios = <&pio 35 GPIO_ACTIVE_LOW>; }; }; }; ð { pinctrl-names = "default"; pinctrl-0 = <&mdio_pins>; status = "okay"; gmac0: mac@0 { compatible = "mediatek,eth-mac"; reg = <0>; phy-mode = "2500base-x"; phy-handle = <&phy0>; nvmem-cells = <&macaddr_factory_a 0>; nvmem-cell-names = "mac-address"; }; gmac1: mac@1 { compatible = "mediatek,eth-mac"; reg = <1>; phy-mode = "gmii"; phy-handle = <&int_gbe_phy>; nvmem-cells = <&macaddr_factory_a 1>; nvmem-cell-names = "mac-address"; }; }; &i2c0 { clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; status = "okay"; eeprom@50 { compatible = "atmel,24c64"; reg = <0x50>; page-size = <32>; }; rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; #clock-cells = <0>; }; crypto@60 { compatible = "atmel,atecc508a"; reg = <0x60>; }; }; &mdio_bus { phy0: ethernet-phy@5 { reg = <5>; compatible = "ethernet-phy-ieee802.3-c45"; phy-mode = "2500base-x"; reset-gpios = <&pio 14 GPIO_ACTIVE_LOW>; reset-assert-us = <15000>; reset-deassert-us = <68000>; realtek,aldps-enable; }; }; &spi0 { pinctrl-names = "default"; pinctrl-0 = <&spi0_flash_pins>; status = "okay"; spi_nand: flash@0 { compatible = "spi-nand"; #address-cells = <1>; #size-cells = <1>; reg = <0>; spi-max-frequency = <52000000>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "bl2"; reg = <0x000000 0x100000>; read-only; }; partition@100000 { label = "u-boot-env"; reg = <0x100000 0x80000>; }; partition@180000 { compatible = "nvmem-cells"; label = "factory"; reg = <0x180000 0x100000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0x1000>; }; macaddr_factory_a: macaddr@a { compatible = "mac-base"; reg = <0xa 0x6>; #nvmem-cell-cells = <1>; }; }; }; partition@280000 { label = "config"; reg = <0x280000 0x100000>; read-only; }; partition@380000 { label = "fip"; reg = <0x380000 0x200000>; read-only; }; partition@580000 { label = "ubi"; reg = <0x580000 0xf880000>; }; }; }; }; &pio { i2c0_pins: i2c0-pins { mux { function = "i2c"; groups = "i2c0_1"; }; }; spi0_flash_pins: spi0-pins { mux { function = "spi"; groups = "spi0", "spi0_wp_hold"; }; conf-pu { pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; drive-strength = <8>; mediatek,pull-up-adv = <0>; }; conf-pd { pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; drive-strength = <8>; mediatek,pull-down-adv = <0>; }; }; uart1_pins: uart1-pins { mux { function = "uart"; groups = "uart1_3"; }; }; uart2_pins: uart2-pins { mux { function = "uart"; groups = "uart2_0_tx_rx"; }; }; wwan_rst_h: wwan-rst-h { pins = "GPIO_WPS"; drive-strength = <8>; mediatek,pull-down-adv = <0>; output-low; }; }; &uart0 { status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; status = "okay"; }; &usb_phy { status = "okay"; }; &watchdog { status = "okay"; }; &wifi { nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; status = "okay"; band@1 { reg = <1>; nvmem-cells = <&macaddr_factory_a 0>; nvmem-cell-names = "mac-address"; }; }; &xhci { pinctrl-names = "default"; pinctrl-0 = <&wwan_rst_h>; status = "okay"; };