From 876bb5b69c1e083be526c0ea261982d5eb78556f Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Fri, 9 Sep 2022 23:44:42 +0200 Subject: [PATCH] net: phy: Add Qualcom QCA807x driver This adds driver for the Qualcomm QCA8072 and QCA8075 PHY-s. They are 2 or 5 port IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and 1000BASE-T PHY-s. They feature 2 SerDes, one for PSGMII or QSGMII connection with MAC, while second one is SGMII for connection to MAC or fiber. Both models have a combo port that supports 1000BASE-X and 100BASE-FX fiber. Each PHY inside of QCA807x series has 4 digitally controlled output only pins that natively drive LED-s. But some vendors used these to driver generic LED-s controlled by userspace, so lets enable registering each PHY as GPIO controller and add driver for it. These are commonly used in Qualcomm IPQ40xx, IPQ60xx and IPQ807x boards. Signed-off-by: Robert Marko --- drivers/net/phy/Kconfig | 7 +++++++ drivers/net/phy/Makefile | 1 + 2 files changed, 8 insertions(+) --- a/drivers/net/phy/qcom/Kconfig +++ b/drivers/net/phy/qcom/Kconfig @@ -15,6 +15,13 @@ config QCA83XX_PHY help Currently supports the internal QCA8337(Internal qca8k PHY) model +config QCA807X_PHY + tristate "Qualcomm QCA807x PHYs" + depends on OF_MDIO + help + Currently supports the Qualcomm QCA8072, QCA8075 and the PSGMII + control PHY. + config QCA808X_PHY tristate "Qualcomm QCA808x PHYs" select QCOM_NET_PHYLIB --- a/drivers/net/phy/qcom/Makefile +++ b/drivers/net/phy/qcom/Makefile @@ -2,4 +2,5 @@ obj-$(CONFIG_QCOM_NET_PHYLIB) += qcom-phy-lib.o obj-$(CONFIG_AT803X_PHY) += at803x.o obj-$(CONFIG_QCA83XX_PHY) += qca83xx.o +obj-$(CONFIG_QCA807X_PHY) += qca807x.o obj-$(CONFIG_QCA808X_PHY) += qca808x.o