From 7805365fee582056b32c69cf35aafbb94b14a8ca Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Fri, 19 Aug 2022 00:02:43 +0200 Subject: [PATCH] thermal/drivers/tsens: Allow configuring min and max trips IPQ8074 and IPQ6018 dont support negative trip temperatures and support up to 204 degrees C as the max trip temperature. So, instead of always setting the -40 as min and 120 degrees C as max allow it to be configured as part of the features. Signed-off-by: Robert Marko Reviewed-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220818220245.338396-3-robimarko@gmail.com Signed-off-by: Daniel Lezcano --- drivers/thermal/qcom/tsens-8960.c | 2 ++ drivers/thermal/qcom/tsens-v0_1.c | 2 ++ drivers/thermal/qcom/tsens-v1.c | 2 ++ drivers/thermal/qcom/tsens-v2.c | 2 ++ drivers/thermal/qcom/tsens.c | 4 ++-- drivers/thermal/qcom/tsens.h | 4 ++++ 6 files changed, 14 insertions(+), 2 deletions(-) --- a/drivers/thermal/qcom/tsens-8960.c +++ b/drivers/thermal/qcom/tsens-8960.c @@ -273,6 +273,8 @@ static struct tsens_features tsens_8960_ .adc = 1, .srot_split = 0, .max_sensors = 11, + .trip_min_temp = -40000, + .trip_max_temp = 120000, }; struct tsens_plat_data data_8960 = { --- a/drivers/thermal/qcom/tsens-v0_1.c +++ b/drivers/thermal/qcom/tsens-v0_1.c @@ -553,6 +553,8 @@ static struct tsens_features tsens_v0_1_ .adc = 1, .srot_split = 1, .max_sensors = 11, + .trip_min_temp = -40000, + .trip_max_temp = 120000, }; static const struct reg_field tsens_v0_1_regfields[MAX_REGFIELDS] = { --- a/drivers/thermal/qcom/tsens-v1.c +++ b/drivers/thermal/qcom/tsens-v1.c @@ -277,6 +277,8 @@ static struct tsens_features tsens_v1_fe .adc = 1, .srot_split = 1, .max_sensors = 11, + .trip_min_temp = -40000, + .trip_max_temp = 120000, }; static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = { --- a/drivers/thermal/qcom/tsens-v2.c +++ b/drivers/thermal/qcom/tsens-v2.c @@ -35,6 +35,8 @@ static struct tsens_features tsens_v2_fe .adc = 0, .srot_split = 1, .max_sensors = 16, + .trip_min_temp = -40000, + .trip_max_temp = 120000, }; static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = { --- a/drivers/thermal/qcom/tsens.c +++ b/drivers/thermal/qcom/tsens.c @@ -572,8 +572,8 @@ static int tsens_set_trips(void *_sensor dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n", hw_id, __func__, low, high); - cl_high = clamp_val(high, -40000, 120000); - cl_low = clamp_val(low, -40000, 120000); + cl_high = clamp_val(high, priv->feat->trip_min_temp, priv->feat->trip_max_temp); + cl_low = clamp_val(low, priv->feat->trip_min_temp, priv->feat->trip_max_temp); high_val = tsens_mC_to_hw(s, cl_high); low_val = tsens_mC_to_hw(s, cl_low); --- a/drivers/thermal/qcom/tsens.h +++ b/drivers/thermal/qcom/tsens.h @@ -501,6 +501,8 @@ enum regfield_ids { * with SROT only being available to secure boot firmware? * @has_watchdog: does this IP support watchdog functionality? * @max_sensors: maximum sensors supported by this version of the IP + * @trip_min_temp: minimum trip temperature supported by this version of the IP + * @trip_max_temp: maximum trip temperature supported by this version of the IP */ struct tsens_features { unsigned int ver_major; @@ -510,6 +512,8 @@ struct tsens_features { unsigned int srot_split:1; unsigned int has_watchdog:1; unsigned int max_sensors; + int trip_min_temp; + int trip_max_temp; }; /**