From ca86dbd309ba03bef38ae91f037e2030bb671ab7 Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Wed, 18 Jan 2023 15:40:39 +0000 Subject: [PATCH 03/42] thermal/drivers/mtk: Use function pointer for raw_to_mcelsius Instead of having if-else logic selecting either raw_to_mcelsius_v1 or raw_to_mcelsius_v2 in mtk_thermal_bank_temperature introduce a function pointer raw_to_mcelsius to struct mtk_thermal which is initialized in the probe function. Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Daniel Golle Reviewed-by: Matthias Brugger Link: https://lore.kernel.org/r/69c17529e8418da3eec703dde31e1b01e5b0f7e8.1674055882.git.daniel@makrotopia.org Signed-off-by: Daniel Lezcano --- drivers/thermal/mtk_thermal.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) --- a/drivers/thermal/mtk_thermal.c +++ b/drivers/thermal/mtk_thermal.c @@ -292,6 +292,8 @@ struct mtk_thermal { const struct mtk_thermal_data *conf; struct mtk_thermal_bank banks[MAX_NUM_ZONES]; + + int (*raw_to_mcelsius)(struct mtk_thermal *mt, int sensno, s32 raw); }; /* MT8183 thermal sensor data */ @@ -656,13 +658,9 @@ static int mtk_thermal_bank_temperature( for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) { raw = readl(mt->thermal_base + conf->msr[i]); - if (mt->conf->version == MTK_THERMAL_V1) { - temp = raw_to_mcelsius_v1( - mt, conf->bank_data[bank->id].sensors[i], raw); - } else { - temp = raw_to_mcelsius_v2( - mt, conf->bank_data[bank->id].sensors[i], raw); - } + temp = mt->raw_to_mcelsius( + mt, conf->bank_data[bank->id].sensors[i], raw); + /* * The first read of a sensor often contains very high bogus @@ -1073,6 +1071,11 @@ static int mtk_thermal_probe(struct plat mtk_thermal_release_periodic_ts(mt, auxadc_base); } + if (mt->conf->version == MTK_THERMAL_V1) + mt->raw_to_mcelsius = raw_to_mcelsius_v1; + else + mt->raw_to_mcelsius = raw_to_mcelsius_v2; + for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++) for (i = 0; i < mt->conf->num_banks; i++) mtk_thermal_init_bank(mt, i, apmixed_phys_base,