// SPDX-License-Identifier: (GPL-2.0 OR MIT)

/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>

#include "mt7986a.dtsi"

/ {
	model = "D-Link AQUILA PRO AI M60 A1";
	compatible = "dlink,aquila-pro-ai-m60-a1", "mediatek,mt7986a";

	aliases {
		serial0 = &uart0;
		led-boot = &led_status_white;
		led-failsafe = &led_status_red;
		led-running = &led_status_white;
		led-upgrade = &led_status_blue;
		label-mac-device = &gmac0;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	memory@40000000 {
		reg = <0 0x40000000 0 0x20000000>;
	};

	gpio-keys {
		compatible = "gpio-keys";

		button-reset {
			label = "reset";
			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};

		button-wps {
			label = "wps";
			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WPS_BUTTON>;
		};

		button-leds-on-off {
			label = "leds-on-off";
			linux,code = <KEY_LIGHTS_TOGGLE>;
			gpios = <&pio 47 GPIO_ACTIVE_LOW>;
		};
	};
};

&eth {
	status = "okay";

	gmac0: mac@0 {
		compatible = "mediatek,eth-mac";
		reg = <0>;
		phy-mode = "2500base-x";

		nvmem-cells = <&macaddr_odm 1>;
		nvmem-cell-names = "mac-address";
		fixed-link {
			speed = <2500>;
			full-duplex;
			pause;
		};
	};

	gmac1: mac@1 {
		compatible = "mediatek,eth-mac";
		reg = <1>;
		phy-mode = "2500base-x";
		phy-handle = <&phy6>;
		nvmem-cells = <&macaddr_odm 0>;
		nvmem-cell-names = "mac-address";
		label = "internet";
	};

	mdio: mdio-bus {
		#address-cells = <1>;
		#size-cells = <0>;

		reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
		reset-delay-us = <1500000>;
		reset-post-delay-us = <1000000>;

		phy6: phy@6 {
			compatible = "maxlinear,gpy211", "ethernet-phy-ieee802.3-c45";
			reg = <6>;
			phy-mode = "2500base-x";
		};

		switch@1f {
			compatible = "mediatek,mt7531";
			reg = <31>;
			reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
			interrupt-controller;
			#interrupt-cells = <1>;
			interrupt-parent = <&pio>;
			interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;
					label = "lan1";
				};

				port@1 {
					reg = <1>;
					label = "lan2";
				};

				port@2 {
					reg = <2>;
					label = "lan3";
				};

				port@3 {
					reg = <3>;
					label = "lan4";
				};

				port@6 {
					reg = <6>;
					label = "cpu";
					ethernet = <&gmac0>;
					phy-mode = "2500base-x";

					fixed-link {
						speed = <2500>;
						full-duplex;
						pause;
					};
				};
			};
		};
	};
};

&pio {
	spi_flash_pins: spi-flash-pins-33-to-38 {
		mux {
			function = "spi";
			groups = "spi0", "spi0_wp_hold";
		};
		conf-pu {
			pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
			drive-strength = <8>;
			mediatek,pull-up-adv = <0>; /* bias-disable */
		};
		conf-pd {
			pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
			drive-strength = <8>;
			mediatek,pull-down-adv = <0>; /* bias-disable */
		};
	};

	wf_2g_5g_pins: wf_2g_5g-pins {
		mux {
			function = "wifi";
			groups = "wf_2g", "wf_5g";
		};
		conf {
			pins =
				"WF0_HB2",
				"WF0_HB3",
				"WF0_HB4",
				"WF0_HB0",
				"WF0_HB0_B",
				"WF0_HB5",
				"WF0_HB6",
				"WF0_HB7",
				"WF0_HB8",
				"WF0_HB9",
				"WF0_HB10",
				"WF0_TOP_CLK",
				"WF0_TOP_DATA",
				"WF1_HB1",
				"WF1_HB2",
				"WF1_HB3",
				"WF1_HB4",
				"WF1_HB0",
				"WF1_HB5",
				"WF1_HB6",
				"WF1_HB7",
				"WF1_HB8",
				"WF1_TOP_CLK",
				"WF1_TOP_DATA";
			drive-strength = <4>;
		};
	};

	i2c_pins_3_4: i2c-pins-3-4 {
		mux {
			function = "i2c";
			groups = "i2c";
		};
	};
};

&spi0 {
	pinctrl-names = "default";
	pinctrl-0 = <&spi_flash_pins>;
	status = "okay";

	flash@0 {
		compatible = "spi-nand";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0>;

		spi-max-frequency = <20000000>;
		spi-tx-bus-width = <4>;
		spi-rx-bus-width = <4>;

		mediatek,nmbm;
		mediatek,bmt-max-ratio = <1>;
		mediatek,bmt-max-reserved-blocks = <64>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "BL2";
				reg = <0x000000 0x100000>;
				read-only;
			};

			partition@100000 {
				label = "u-boot-env";
				reg = <0x100000 0x80000>;
			};

			partition@180000 {
				label = "Factory";
				reg = <0x180000 0x200000>;
				read-only;

				nvmem-layout {
					compatible = "fixed-layout";
					#address-cells = <1>;
					#size-cells = <1>;

					eeprom_factory_0: eeprom@0 {
						reg = <0x0 0x1000>;
					};
				};
			};

			partition@380000 {
				label = "FIP";
				reg = <0x380000 0x200000>;
				read-only;
			};

			partition@580000 {
				label = "ubi";
				reg = <0x580000 0x3200000>;
			};

			partition@3780000 {
				label = "ubi1";
				reg = <0x3780000 0x3200000>;
				read-only;
			};

			partition@6980000 {
				label = "Odm";
				reg = <0x6980000 0x40000>;
				read-only;

				nvmem-layout {
					compatible = "fixed-layout";
					#address-cells = <1>;
					#size-cells = <1>;

					macaddr_odm: macaddr@81 {
						compatible = "mac-base";
						reg = <0x81 0x6>;
						#nvmem-cell-cells = <1>;
					};
				};

			};

			partition@69c0000 {
				label = "Config1";
				reg = <0x69c0000 0x80000>;
				read-only;
			};

			partition@6a40000 {
				label = "Config2";
				reg = <0x6a40000 0x80000>;
				read-only;
			};

			partition@6ac0000 {
				label = "Storage";
				reg = <0x6ac0000 0xA00000>;
				read-only;
			};

		};
	};
};

&wifi {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&wf_2g_5g_pins>;


	nvmem-cells = <&eeprom_factory_0>;
	nvmem-cell-names = "eeprom";

	band@0 {
		/* 2.4 GHz */
		reg = <0>;
		nvmem-cells = <&macaddr_odm 2>;
		nvmem-cell-names = "mac-address";
	};
	band@1 {
		/* 5 GHz */
		reg = <1>;
		nvmem-cells = <&macaddr_odm 5>;
		nvmem-cell-names = "mac-address";
	};
};

&uart0 {
	status = "okay";
};

&watchdog {
	status = "okay";
};

&i2c0 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&i2c_pins_3_4>;

	gca230718@40 {
		compatible = "unknown,gca230718";
		reg = <0x40>;

		led_status_red: led@0 {
			color = <LED_COLOR_ID_RED>;
			function = LED_FUNCTION_STATUS;
			reg = <0>;
		};

		led@1 {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_STATUS;
			reg = <1>;
		};

		led_status_blue: led@2 {
			color = <LED_COLOR_ID_BLUE>;
			function = LED_FUNCTION_STATUS;
			reg = <2>;
		};

		led_status_white: led@3 {
			color = <LED_COLOR_ID_WHITE>;
			function = LED_FUNCTION_STATUS;
			reg = <3>;
		};
	};
};