// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "qca956x.dtsi" #include #include #include / { aliases { label-mac-device = ð0; led-boot = &led_system; led-failsafe = &led_system; led-running = &led_system; led-upgrade = &led_system; }; keys { compatible = "gpio-keys"; reset { label = "reset"; linux,code = ; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; }; leds { compatible = "gpio-leds"; led_system: system { label = "green:system"; gpios = <&gpio 1 GPIO_ACTIVE_LOW>; default-state = "on"; }; usb { function = LED_FUNCTION_USB; color = ; gpios = <&gpio 7 GPIO_ACTIVE_LOW>; trigger-sources = <&hub_port0>; linux,default-trigger = "usbport"; }; wlan2g { label = "green:wlan2g"; gpios = <&gpio 19 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy1tpt"; }; }; }; &pcie { status = "okay"; wifi@0,0 { compatible = "qcom,ath10k"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&cal_art_5000>; nvmem-cell-names = "calibration"; }; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions: partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x000000 0x040000>; read-only; }; partition@40000 { label = "u-boot-env"; reg = <0x040000 0x010000>; read-only; }; pridata: partition@50000 { label = "pri-data"; reg = <0x050000 0x010000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_pridata_400: macaddr@400 { reg = <0x400 0x6>; }; }; }; art: partition@60000 { label = "art"; reg = <0x060000 0x010000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; cal_art_5000: calibration@5000 { reg = <0x5000 0x844>; }; }; }; }; }; }; &mdio0 { status = "okay"; phy0: ethernet-phy@0 { reg = <0>; phy-mode = "sgmii"; qca,mib-poll-interval = <500>; qca,ar8327-initvals = < 0x04 0x00080080 /* PORT0 PAD MODE CTRL */ 0x7c 0x0000007e /* PORT0_STATUS */ >; }; }; ð0 { status = "okay"; pll-data = <0x03000101 0x00000101 0x00001919>; phy-mode = "sgmii"; phy-handle = <&phy0>; nvmem-cells = <&macaddr_pridata_400>; nvmem-cell-names = "mac-address"; }; &usb_phy0 { status = "okay"; }; &usb0 { status = "okay"; }; &usb_phy1 { status = "okay"; }; &usb1 { status = "okay"; }; &wmac { status = "okay"; mtd-cal-data = <&art 0x1000>; };