// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "qca955x.dtsi" #include #include #include / { model = "AirTight Networks C-75"; compatible = "airtight,c-75", "qca,qca9550", "qca,qca9558"; aliases { label-mac-device = ð0; led-boot = &led_power_amber; led-running = &led_power_green; led-failsafe = &led_power_amber; led-upgrade = &led_power_amber; }; keys { compatible = "gpio-keys"; reset { label = "reset"; linux,code = ; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; }; }; leds { compatible = "gpio-leds"; led_power_amber: power-amber { color = ; function = LED_FUNCTION_POWER; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; }; led_power_green: power-green { color = ; function = LED_FUNCTION_POWER; gpios = <&gpio 4 GPIO_ACTIVE_LOW>; }; wlan2g { label = "green:wlan2g"; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy1tpt"; }; }; virtual_flash { compatible = "mtd-concat"; devices = <&fwconcat0 &fwconcat1>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "firmware"; reg = <0x0 0x1f90000>; compatible = "denx,uimage"; }; }; }; }; ð0 { status = "okay"; nvmem-cells = <&macaddr_art_0>; nvmem-cell-names = "mac-address"; phy-handle = <&phy0>; pll-data = <0xa6000000 0x00000101 0x00001616>; }; &mdio0 { status = "okay"; phy0: ethernet-phy@0 { reg = <0>; qca,ar8327-initvals = < 0x04 0x07600000 /* PORT0 PAD MODE CTRL */ 0x0c 0x00080080 /* PORT6 PAD MODE CTRL */ 0x58 0xc935c935 /* LED2 CTRL */ 0x5c 0x03ffff00 /* LED3 CTRL */ 0x7c 0x0000007e /* PORT0_STATUS */ 0x94 0x0000007e /* PORT6_STATUS */ >; }; }; ð1 { status = "okay"; nvmem-cells = <&macaddr_art_6>; nvmem-cell-names = "mac-address"; pll-data = <0x03000101 0x00000101 0x00001616>; fixed-link { speed = <1000>; full-duplex; }; }; &pcie0 { status = "okay"; wifi@0,0 { compatible = "qcom,ath10k"; reg = <0x0000 0 0 0 0>; }; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x000000 0x040000>; read-only; }; partition@40000 { label = "u-boot-env"; reg = <0x040000 0x010000>; }; partition@50000 { label = "wlandrv"; reg = <0x050000 0x010000>; read-only; }; fwconcat0: partition@60000 { label = "fwconcat0"; reg = <0x060000 0xf90000>; }; art: partition@ff0000 { label = "art"; reg = <0xff0000 0x010000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_art_0: macaddr@0 { reg = <0x0 0x6>; }; macaddr_art_6: macaddr@6 { reg = <0x6 0x6>; }; }; }; }; }; flash@1 { compatible = "jedec,spi-nor"; reg = <1>; spi-max-frequency = <25000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; fwconcat1: partition@0 { label = "fwconcat1"; reg = <0x0 0x1000000>; }; }; }; }; &usb_phy0 { status = "okay"; }; &usb0 { status = "okay"; }; &wmac { status = "okay"; mtd-cal-data = <&art 0x1000>; };