// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include #include "mt7620a_tplink_archer.dtsi" / { compatible = "tplink,archer-c5-v4", "ralink,mt7620a-soc"; model = "TP-Link Archer C5 v4"; aliases { led-boot = &led_power; led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; label-mac-device = ðernet; }; leds { compatible = "gpio-leds"; led_power: led-0 { function = LED_FUNCTION_POWER; color = ; gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; }; led-1 { function = LED_FUNCTION_WLAN; color = ; function-enumerator = <2>; gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy1tpt"; }; led-2 { function = LED_FUNCTION_WLAN; color = ; function-enumerator = <5>; gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; led-3 { function = LED_FUNCTION_WAN; color = ; gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; }; led-4 { function = LED_FUNCTION_WAN; color = ; gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; }; led-5 { function = LED_FUNCTION_LAN; color = ; gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; }; led-6 { function = LED_FUNCTION_USB; color = ; gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; trigger-sources = <&ohci_port1>, <&ehci_port1>; linux,default-trigger = "usbport"; }; led-7 { function = LED_FUNCTION_WPS; color = ; gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; }; }; rtl8367s { compatible = "realtek,rtl8367b"; cpu_port = <7>; realtek,extif2 = <1 0 1 1 1 1 1 1 2>; mii-bus = <&mdio0>; phy-id = <29>; }; }; &spi0 { flash@0 { #address-cells = <1>; #size-cells = <1>; }; }; &state_default { gpio { groups = "i2c", "uartf", "ephy", "rgmii2"; function = "gpio"; }; }; ðernet { pinctrl-names = "default"; pinctrl-0 = <&rgmii1_pins &mdio_pins>; port@5 { status = "okay"; mediatek,fixed-link = <1000 1 1 1>; phy-mode = "rgmii"; }; mdio0: mdio-bus { status = "okay"; reset-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; reset-delay-us = <10000>; }; }; &wmac { pinctrl-names = "default", "pa_gpio"; pinctrl-0 = <&pa_pins>; pinctrl-1 = <&pa_gpio_pins>; nvmem-cells = <&eeprom_radio_0>, <&macaddr_rom_f100 0>; nvmem-cell-names = "eeprom", "mac-address"; }; &wifi { nvmem-cells = <&eeprom_radio_8000>, <&macaddr_rom_f100 2>; nvmem-cell-names = "eeprom", "mac-address"; };