// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "mt7621.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	compatible = "netgear,wax202", "mediatek,mt7621-soc";
	model = "Netgear WAX202";

	aliases {
		led-boot = &led_power_green;
		led-failsafe = &led_power_orange;
		led-running = &led_power_green;
		led-upgrade = &led_power_orange;
	};

	chosen {
		bootargs = "console=ttyS0,115200";
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
	};

	leds {
		compatible = "gpio-leds";

		led_power_green: power_green {
			label = "green:power";
			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
		};

		led_power_orange: power_orange {
			label = "orange:power";
			gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
		};

		led_net_green: net_green {
			label = "green:net";
			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
		};

		led_net_blue: net_blue {
			label = "blue:net";
			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
		};

		led_lan1_orange: lan1_orange {
			label = "orange:lan1";
			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
		};

		led_lan2_orange: lan2_orange {
			label = "orange:lan2";
			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
		};

		led_lan3_orange: lan3_orange {
			label = "orange:lan3";
			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
		};

		led_wifi2g_green: wifi2g_green {
			label = "green:wifi2g";
			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy0radio";
		};

		led_wifi2g_blue: wifi2g_blue {
			label = "blue:wifi2g";
			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
		};

		led_wifi5g_green: wifi5g_green {
			label = "green:wifi5g";
			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy1radio";
		};

		led_wifi5g_blue: wifi5g_blue {
			label = "blue:wifi5g";
			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
		};
	};
};

&nand {
	status = "okay";

	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		partition@0 {
			label = "Bootloader";
			reg = <0x0 0x80000>;
			read-only;
		};

		partition@80000 {
			label = "Config";
			reg = <0x80000 0x80000>;
			read-only;
		};

		factory: partition@100000 {
			label = "Factory";
			reg = <0x100000 0x80000>;
			read-only;

			nvmem-layout {
				compatible = "fixed-layout";
				#address-cells = <1>;
				#size-cells = <1>;

				eeprom_factory_0: eeprom@0 {
					reg = <0x0 0xe00>;
				};
			};
		};

		partition@180000 {
			label = "firmware";
			reg = <0x180000 0x2600000>;

			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "kernel";
				reg = <0x0 0x400000>;
			};

			partition@400000 {
				label = "ubi";
				reg = <0x400000 0x2200000>;
			};
		};

		partition@2780000 {
			label = "firmware_backup";
			reg = <0x2780000 0x2600000>;
			read-only;
		};

		partition@4d80000 {
			label = "CFG";
			reg = <0x4d80000 0x800000>;
			read-only;
		};

		partition@5580000 {
			label = "RAE";
			reg = <0x5580000 0x400000>;
			read-only;
		};

		partition@5980000 {
			label = "POT";
			reg = <0x5980000 0x100000>;
			read-only;
		};

		partition@5a80000 {
			label = "Language";
			reg = <0x5a80000 0x400000>;
			read-only;
		};

		partition@5e80000 {
			label = "Traffic";
			reg = <0x5e80000 0x200000>;
			read-only;
		};

		partition@6080000 {
			label = "Cert";
			reg = <0x6080000 0x100000>;
			read-only;
		};

		partition@6180000 {
			label = "NTGRcryptK";
			reg = <0x6180000 0x100000>;
			read-only;
		};

		partition@6280000 {
			label = "NTGRcryptD";
			reg = <0x6280000 0x500000>;
			read-only;
		};

		partition@6780000 {
			label = "LOG";
			reg = <0x6780000 0x100000>;
			read-only;
		};

		partition@6880000 {
			label = "User_data";
			reg = <0x6880000 0x640000>;
			read-only;
		};
	};
};

&pcie {
	status = "okay";
};

&pcie1 {
	wifi@0,0 {
		compatible = "mediatek,mt76";
		reg = <0x0000 0 0 0 0>;
		nvmem-cells = <&eeprom_factory_0>;
		nvmem-cell-names = "eeprom";
	};
};

&state_default {
	gpio {
		groups = "uart3", "uart2", "jtag", "wdt";
		function = "gpio";
	};
};

&gmac1 {
	status = "okay";
	label = "wan";
	phy-handle = <&ethphy0>;
};

&mdio {
	ethphy0: ethernet-phy@0 {
		reg = <0>;
	};
};

&switch0 {
	ports {
		port@1 {
			status = "okay";
			label = "lan1";
		};

		port@2 {
			status = "okay";
			label = "lan2";
		};

		/* port@3 is not used */

		port@4 {
			status = "okay";
			label = "lan3";
		};
	};
};

&xhci {
	status = "disabled";
};