#include "rt3050.dtsi" #include #include #include / { compatible = "sitecom,wl-351", "ralink,rt3052-soc"; model = "Sitecom WL-351 v1 002"; aliases { led-boot = &led_power; led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; }; flash@1f000000 { compatible = "cfi-flash"; reg = <0x1f000000 0x800000>; bank-width = <2>; device-width = <2>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0x200>; }; macaddr_factory_4: macaddr@4 { reg = <0x4 0x6>; }; }; }; partition@50000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x50000 0x3b0000>; }; }; }; leds { compatible = "gpio-leds"; led_power: power { function = LED_FUNCTION_POWER; color = ; gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; }; unpopulated { label = "amber:unpopulated"; gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; }; unpopulated2 { label = "blue:unpopulated"; gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; linux,code = ; }; wps { label = "wps"; gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; linux,code = ; }; }; rtl8366rb { compatible = "realtek,rtl8366rb"; gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>; gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>; }; }; &state_default { gpio { groups = "spi", "i2c", "jtag", "mdio", "uartf"; function = "gpio"; }; }; ðernet { nvmem-cells = <&macaddr_factory_4>; nvmem-cell-names = "mac-address"; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; }; &esw { ralink,rgmii = <1>; mediatek,portmap = <0x3f>; ralink,fct2 = <0x0002500c>; /* * ext phy base addr 31, rx/tx clock skew 0, * turbo mii off, rgmi 3.3v off, port 5 polling off * port5: enabled, gige, full-duplex, rx/tx-flow-control * port6: enabled, gige, full-duplex, rx/tx-flow-control */ ralink,fpa2 = <0x1f003fff>; }; &wmac { nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; }; &otg { status = "okay"; };