#include "rt3050.dtsi" #include #include #include / { compatible = "mofinetwork,mofi3500-3gn", "ralink,rt3052-soc"; model = "MoFi Network MOFI3500-3GN"; aliases { led-boot = &led_status; led-failsafe = &led_status; led-running = &led_status; led-upgrade = &led_status; }; flash@1f000000 { compatible = "cfi-flash"; reg = <0x1f000000 0x800000>; bank-width = <2>; device-width = <2>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0x200>; }; }; }; partition@50000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x50000 0x7b0000>; }; }; }; leds { compatible = "gpio-leds"; usb { function = LED_FUNCTION_USB; color = ; gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; trigger-sources = <&otg_port1>; linux,default-trigger = "usbport"; }; 3g { label = "green:3g"; gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; }; led_status: status { function = LED_FUNCTION_STATUS; color = ; gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; }; wps { function = LED_FUNCTION_WPS; color = ; gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; linux,code = ; }; connect { label = "connect"; gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; linux,code = ; }; wps { label = "wps"; gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; linux,code = ; }; }; }; &state_default { gpio { groups = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; function = "gpio"; }; }; &esw { mediatek,portmap = <0x2f>; }; &wmac { nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; }; &otg { status = "okay"; };