// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "qca955x.dtsi" #include #include #include / { compatible = "dlink,dir-629-a1", "qca,qca9558"; model = "D-Link DIR-629 A1"; aliases { label-mac-device = ð0; led-boot = &led_power; led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; serial0 = &uart; }; keys { compatible = "gpio-keys"; reset { label = "reset"; linux,code = ; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; }; wps { label = "wps"; linux,code = ; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; }; leds { compatible = "gpio-leds"; led-0 { color = ; function = LED_FUNCTION_WLAN; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; led_power: led-1 { label = "green:power"; color = ; function = LED_FUNCTION_POWER; gpios = <&gpio 21 GPIO_ACTIVE_LOW>; }; led-2 { color = ; function = LED_FUNCTION_WPS; gpios = <&gpio 23 GPIO_ACTIVE_LOW>; }; }; }; ð0 { status = "okay"; phy-mode = "mii"; nvmem-cells = <&macaddr_mfcdata_35 0>; nvmem-cell-names = "mac-address"; fixed-link { speed = <100>; full-duplex; }; }; &mdio0 { status = "okay"; switch0@1f { compatible = "qca,ar8236"; reg = <0x1f>; }; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <30000000>; m25p,fast-read; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x000000 0x040000>; read-only; }; partition@40000 { label = "u-boot-env"; reg = <0x040000 0x008000>; read-only; }; partition@48000 { label = "mfcdata"; reg = <0x048000 0x008000>; read-only; compatible = "nvmem-cells"; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_mfcdata_35: macaddr@35 { compatible = "mac-base"; reg = <0x35 0x11>; #nvmem-cell-cells = <1>; }; macaddr_mfcdata_51: macaddr@51 { compatible = "mac-base"; reg = <0x51 0x11>; #nvmem-cell-cells = <1>; }; }; }; partition@50000 { label = "devconf"; reg = <0x050000 0x010000>; read-only; }; partition@60000 { label = "langpack"; reg = <0x060000 0x020000>; read-only; }; partition@80000 { label = "art"; reg = <0x080000 0x010000>; read-only; compatible = "nvmem-cells"; #address-cells = <1>; #size-cells = <1>; cal_art_1000: calibration@1000 { reg = <0x1000 0x440>; }; }; partition@90000 { compatible = "seama"; label = "firmware"; reg = <0x090000 0x770000>; }; }; }; }; &wmac { status = "okay"; nvmem-cells = <&cal_art_1000>, <&macaddr_mfcdata_51 0>; nvmem-cell-names = "calibration", "mac-address"; };