From e4c2a7731efcd7abe7554debef783b5358712d6d Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Mon, 9 Sep 2024 16:41:12 +0100
Subject: [PATCH 1256/1350] media: i2c: ov5647: Add control of V4L2_CID_HBLANK

The driver did expose V4L2_CID_HBLANK, but as a READ_ONLY control.

The sensor only uses the HTS register to control the line length,
so convert this control to read/write, with the appropriate ranges.
Adopt the old fixed values as the minimum values permitted in each
mode to avoid issues of it not streaming.

This should allow exposure times up to ~3 seconds (up from ~1sec).

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 drivers/media/i2c/ov5647.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

--- a/drivers/media/i2c/ov5647.c
+++ b/drivers/media/i2c/ov5647.c
@@ -53,6 +53,8 @@
 #define OV5647_REG_AEC_AGC		0x3503
 #define OV5647_REG_GAIN_HI		0x350a
 #define OV5647_REG_GAIN_LO		0x350b
+#define OV5647_REG_HTS_HI		0x380c
+#define OV5647_REG_HTS_LO		0x380d
 #define OV5647_REG_VTS_HI		0x380e
 #define OV5647_REG_VTS_LO		0x380f
 #define OV5647_REG_VFLIP		0x3820
@@ -79,6 +81,8 @@
 #define OV5647_VBLANK_MIN		24
 #define OV5647_VTS_MAX			32767
 
+#define OV5647_HTS_MAX			0x1fff
+
 #define OV5647_EXPOSURE_MIN		4
 #define OV5647_EXPOSURE_STEP		1
 #define OV5647_EXPOSURE_DEFAULT		1000
@@ -188,8 +192,6 @@ static struct regval_list ov5647_2592x19
 	{0x3a19, 0xf8},
 	{0x3c01, 0x80},
 	{0x3b07, 0x0c},
-	{0x380c, 0x0b},
-	{0x380d, 0x1c},
 	{0x3814, 0x11},
 	{0x3815, 0x11},
 	{0x3708, 0x64},
@@ -277,8 +279,6 @@ static struct regval_list ov5647_1080p30
 	{0x3a19, 0xf8},
 	{0x3c01, 0x80},
 	{0x3b07, 0x0c},
-	{0x380c, 0x09},
-	{0x380d, 0x70},
 	{0x3814, 0x11},
 	{0x3815, 0x11},
 	{0x3708, 0x64},
@@ -376,8 +376,6 @@ static struct regval_list ov5647_2x2binn
 	{0x3809, 0x10},
 	{0x380a, 0x03},
 	{0x380b, 0xcc},
-	{0x380c, 0x07},
-	{0x380d, 0x68},
 	{0x3811, 0x0c},
 	{0x3813, 0x06},
 	{0x3814, 0x31},
@@ -451,8 +449,6 @@ static struct regval_list ov5647_640x480
 	{0x3a19, 0xf8},
 	{0x3c01, 0x80},
 	{0x3b07, 0x0c},
-	{0x380c, 0x07},
-	{0x380d, 0x3c},
 	{0x3814, 0x35},
 	{0x3815, 0x35},
 	{0x3708, 0x64},
@@ -1079,7 +1075,8 @@ static int ov5647_set_pad_fmt(struct v4l
 					 mode->pixel_rate, 1, mode->pixel_rate);
 
 		hblank = mode->hts - mode->format.width;
-		__v4l2_ctrl_modify_range(sensor->hblank, hblank, hblank, 1,
+		__v4l2_ctrl_modify_range(sensor->hblank, hblank,
+					 OV5647_HTS_MAX - mode->format.width, 1,
 					 hblank);
 
 		vblank = mode->vts - mode->format.height;
@@ -1343,6 +1340,10 @@ static int ov5647_s_ctrl(struct v4l2_ctr
 		ret = ov5647_write16(sd, OV5647_REG_VTS_HI,
 				     sensor->mode->format.height + ctrl->val);
 		break;
+	case V4L2_CID_HBLANK:
+		ret = ov5647_write16(sd, OV5647_REG_HTS_HI,
+				     sensor->mode->format.width + ctrl->val);
+		break;
 	case V4L2_CID_TEST_PATTERN:
 		ret = ov5647_write(sd, OV5647_REG_ISPCTRL3D,
 				   ov5647_test_pattern_val[ctrl->val]);
@@ -1350,7 +1351,6 @@ static int ov5647_s_ctrl(struct v4l2_ctr
 
 	/* Read-only, but we adjust it based on mode. */
 	case V4L2_CID_PIXEL_RATE:
-	case V4L2_CID_HBLANK:
 		/* Read-only, but we adjust it based on mode. */
 		break;
 
@@ -1427,10 +1427,11 @@ static int ov5647_init_controls(struct o
 					       sensor->mode->pixel_rate, 1,
 					       sensor->mode->pixel_rate);
 
-	/* By default, HBLANK is read only, but it does change per mode. */
 	hblank = sensor->mode->hts - sensor->mode->format.width;
 	sensor->hblank = v4l2_ctrl_new_std(&sensor->ctrls, &ov5647_ctrl_ops,
-					   V4L2_CID_HBLANK, hblank, hblank, 1,
+					   V4L2_CID_HBLANK, hblank,
+					   OV5647_HTS_MAX -
+					   sensor->mode->format.width, 1,
 					   hblank);
 
 	sensor->vblank = v4l2_ctrl_new_std(&sensor->ctrls, &ov5647_ctrl_ops,
@@ -1464,7 +1465,6 @@ static int ov5647_init_controls(struct o
 		goto handler_free;
 
 	sensor->pixel_rate->flags |= V4L2_CTRL_FLAG_READ_ONLY;
-	sensor->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
 	sensor->sd.ctrl_handler = &sensor->ctrls;
 
 	return 0;