From fefbbcb3324d044d0f8606b8c726587d2a146dde Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Thu, 5 Oct 2023 10:06:18 +0100 Subject: [PATCH 0658/1085] dts: 2712: Update for device tree dtoverlays: Fix up edt5406 entries to match with vc4-kms-dsi-7inch vc4-kms-dsi-7inch expects the touch fragment to be named ts_i2c_frag, but edt5406 didn't do this. dt: Add DSI1 and DSI2 aliases to 2712 In order to keep the DRM names consistent as DSI-1 and DSI-2, add aliases to the Pi5 DT. Signed-off-by: Phil Elwell --- .../boot/dts/broadcom/bcm2708-rpi-b-plus.dts | 3 + .../boot/dts/broadcom/bcm2708-rpi-b-rev1.dts | 3 + arch/arm/boot/dts/broadcom/bcm2708-rpi-b.dts | 3 + arch/arm/boot/dts/broadcom/bcm2708-rpi-cm.dts | 3 + .../boot/dts/broadcom/bcm2708-rpi-zero-w.dts | 1 + .../boot/dts/broadcom/bcm2708-rpi-zero.dts | 1 + .../arm/boot/dts/broadcom/bcm2709-rpi-2-b.dts | 3 + .../arm/boot/dts/broadcom/bcm2709-rpi-cm2.dts | 3 + arch/arm/boot/dts/broadcom/bcm270x-rpi.dtsi | 3 + .../arm/boot/dts/broadcom/bcm2710-rpi-2-b.dts | 3 + .../dts/broadcom/bcm2710-rpi-3-b-plus.dts | 3 + .../arm/boot/dts/broadcom/bcm2710-rpi-3-b.dts | 3 + .../arm/boot/dts/broadcom/bcm2710-rpi-cm3.dts | 3 + .../dts/broadcom/bcm2710-rpi-zero-2-w.dts | 3 + .../arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts | 3 + .../arm/boot/dts/broadcom/bcm2711-rpi-cm4.dts | 3 + .../boot/dts/broadcom/bcm2711-rpi-cm4s.dts | 3 + .../arm/boot/dts/broadcom/bcm2712-rpi-5-b.dts | 826 +++++++++++ arch/arm/boot/dts/broadcom/bcm2712-rpi.dtsi | 281 ++++ arch/arm/boot/dts/broadcom/bcm2712.dtsi | 1286 +++++++++++++++++ arch/arm/boot/dts/broadcom/rp1.dtsi | 1168 +++++++++++++++ arch/arm/boot/dts/overlays/Makefile | 23 + arch/arm/boot/dts/overlays/README | 360 ++++- .../dts/overlays/adau1977-adc-overlay.dts | 4 +- .../dts/overlays/adau7002-simple-overlay.dts | 4 +- .../overlays/akkordion-iqdacplus-overlay.dts | 4 +- .../allo-boss-dac-pcm512x-audio-overlay.dts | 10 +- .../overlays/allo-boss2-dac-audio-overlay.dts | 2 +- .../dts/overlays/allo-digione-overlay.dts | 4 +- .../allo-katana-dac-audio-overlay.dts | 2 +- .../allo-piano-dac-pcm512x-audio-overlay.dts | 4 +- ...o-piano-dac-plus-pcm512x-audio-overlay.dts | 4 +- .../boot/dts/overlays/applepi-dac-overlay.dts | 4 +- .../dts/overlays/arducam-64mp-overlay.dts | 2 +- .../overlays/arducam-pivariety-overlay.dts | 2 +- .../overlays/audioinjector-addons-overlay.dts | 4 +- .../audioinjector-bare-i2s-overlay.dts | 6 +- ...dioinjector-isolated-soundcard-overlay.dts | 4 +- .../overlays/audioinjector-ultra-overlay.dts | 6 +- .../audioinjector-wm8731-audio-overlay.dts | 4 +- .../dts/overlays/audiosense-pi-overlay.dts | 4 +- .../boot/dts/overlays/chipdip-dac-overlay.dts | 4 +- .../dts/overlays/cirrus-wm5102-overlay.dts | 4 +- .../boot/dts/overlays/dacberry400-overlay.dts | 4 +- .../dts/overlays/dionaudio-kiwi-overlay.dts | 4 +- .../dts/overlays/dionaudio-loco-overlay.dts | 4 +- .../overlays/dionaudio-loco-v2-overlay.dts | 4 +- .../dts/overlays/disable-bt-pi5-overlay.dts | 17 + .../dts/overlays/disable-wifi-pi5-overlay.dts | 13 + arch/arm/boot/dts/overlays/draws-overlay.dts | 6 +- .../boot/dts/overlays/edt-ft5406-overlay.dts | 22 +- arch/arm/boot/dts/overlays/edt-ft5406.dtsi | 13 +- .../boot/dts/overlays/fe-pi-audio-overlay.dts | 4 +- .../boot/dts/overlays/ghost-amp-overlay.dts | 4 +- .../googlevoicehat-soundcard-overlay.dts | 4 +- .../dts/overlays/hifiberry-amp-overlay.dts | 4 +- .../dts/overlays/hifiberry-amp100-overlay.dts | 11 +- .../dts/overlays/hifiberry-amp3-overlay.dts | 4 +- .../dts/overlays/hifiberry-dac-overlay.dts | 4 +- .../overlays/hifiberry-dacplus-overlay.dts | 11 +- .../overlays/hifiberry-dacplusadc-overlay.dts | 10 +- .../hifiberry-dacplusadcpro-overlay.dts | 10 +- .../overlays/hifiberry-dacplusdsp-overlay.dts | 4 +- .../overlays/hifiberry-dacplushd-overlay.dts | 4 +- .../dts/overlays/hifiberry-digi-overlay.dts | 4 +- .../overlays/hifiberry-digi-pro-overlay.dts | 4 +- .../boot/dts/overlays/i-sabre-q2m-overlay.dts | 4 +- .../boot/dts/overlays/i2c0-pi5-overlay.dts | 34 + .../boot/dts/overlays/i2c1-pi5-overlay.dts | 34 + .../boot/dts/overlays/i2c2-pi5-overlay.dts | 21 + .../boot/dts/overlays/i2c3-pi5-overlay.dts | 22 + .../arm/boot/dts/overlays/i2s-dac-overlay.dts | 4 +- arch/arm/boot/dts/overlays/imx219-overlay.dts | 2 +- arch/arm/boot/dts/overlays/imx258-overlay.dts | 2 +- .../boot/dts/overlays/imx290_327-overlay.dtsi | 2 +- arch/arm/boot/dts/overlays/imx296-overlay.dts | 2 +- .../boot/dts/overlays/imx477_378-overlay.dtsi | 2 +- arch/arm/boot/dts/overlays/imx519-overlay.dts | 2 +- arch/arm/boot/dts/overlays/imx708-overlay.dts | 4 +- .../dts/overlays/iqaudio-codec-overlay.dts | 4 +- .../boot/dts/overlays/iqaudio-dac-overlay.dts | 4 +- .../dts/overlays/iqaudio-dacplus-overlay.dts | 4 +- .../iqaudio-digi-wm8804-audio-overlay.dts | 4 +- .../arm/boot/dts/overlays/irs1125-overlay.dts | 2 +- .../dts/overlays/justboom-both-overlay.dts | 4 +- .../dts/overlays/justboom-dac-overlay.dts | 4 +- .../dts/overlays/justboom-digi-overlay.dts | 4 +- .../boot/dts/overlays/max98357a-overlay.dts | 6 +- .../boot/dts/overlays/mbed-dac-overlay.dts | 6 +- .../boot/dts/overlays/merus-amp-overlay.dts | 4 +- .../dts/overlays/midi-uart0-pi5-overlay.dts | 35 + .../dts/overlays/midi-uart1-pi5-overlay.dts | 35 + .../dts/overlays/midi-uart2-pi5-overlay.dts | 35 + .../dts/overlays/midi-uart3-pi5-overlay.dts | 35 + .../dts/overlays/midi-uart4-pi5-overlay.dts | 35 + arch/arm/boot/dts/overlays/ov2311-overlay.dts | 2 +- arch/arm/boot/dts/overlays/ov5647-overlay.dts | 2 +- arch/arm/boot/dts/overlays/ov7251-overlay.dts | 2 +- arch/arm/boot/dts/overlays/ov9281-overlay.dts | 2 +- arch/arm/boot/dts/overlays/overlay_map.dts | 226 +++ arch/arm/boot/dts/overlays/pibell-overlay.dts | 6 +- .../arm/boot/dts/overlays/pifi-40-overlay.dts | 4 +- .../boot/dts/overlays/pifi-dac-hd-overlay.dts | 4 +- .../dts/overlays/pifi-dac-zero-overlay.dts | 4 +- .../dts/overlays/pifi-mini-210-overlay.dts | 4 +- .../arm/boot/dts/overlays/pisound-overlay.dts | 4 +- .../boot/dts/overlays/proto-codec-overlay.dts | 4 +- .../rra-digidac1-wm8741-audio-overlay.dts | 4 +- .../dts/overlays/spi2-1cs-pi5-overlay.dts | 33 + .../dts/overlays/spi2-2cs-pi5-overlay.dts | 44 + .../dts/overlays/spi3-1cs-pi5-overlay.dts | 33 + .../dts/overlays/spi3-2cs-pi5-overlay.dts | 44 + .../dts/overlays/spi5-1cs-pi5-overlay.dts | 33 + .../dts/overlays/spi5-2cs-pi5-overlay.dts | 44 + .../dts/overlays/superaudioboard-overlay.dts | 6 +- .../dts/overlays/tc358743-audio-overlay.dts | 10 +- .../boot/dts/overlays/tc358743-overlay.dts | 2 +- .../boot/dts/overlays/uart0-pi5-overlay.dts | 17 + .../boot/dts/overlays/uart1-pi5-overlay.dts | 17 + .../boot/dts/overlays/uart2-pi5-overlay.dts | 17 + .../boot/dts/overlays/uart3-pi5-overlay.dts | 17 + .../boot/dts/overlays/uart4-pi5-overlay.dts | 17 + arch/arm/boot/dts/overlays/udrc-overlay.dts | 6 +- .../dts/overlays/ugreen-dabboard-overlay.dts | 10 +- .../dts/overlays/vc4-fkms-v3d-overlay.dts | 6 + .../dts/overlays/vc4-fkms-v3d-pi4-overlay.dts | 6 + .../overlays/vc4-kms-dsi-7inch-overlay.dts | 20 +- .../vc4-kms-dsi-waveshare-panel-overlay.dts | 8 +- .../dts/overlays/vc4-kms-v3d-pi5-overlay.dts | 147 ++ .../dts/overlays/vc4-kms-vga666-overlay.dts | 9 +- .../dts/overlays/wm8960-soundcard-overlay.dts | 4 +- arch/arm64/boot/dts/broadcom/Makefile | 1 + .../boot/dts/broadcom/bcm2712-rpi-5-b.dts | 2 + 133 files changed, 5147 insertions(+), 272 deletions(-) create mode 100644 arch/arm/boot/dts/broadcom/bcm2712-rpi-5-b.dts create mode 100644 arch/arm/boot/dts/broadcom/bcm2712-rpi.dtsi create mode 100644 arch/arm/boot/dts/broadcom/bcm2712.dtsi create mode 100644 arch/arm/boot/dts/broadcom/rp1.dtsi create mode 100644 arch/arm/boot/dts/overlays/disable-bt-pi5-overlay.dts create mode 100644 arch/arm/boot/dts/overlays/disable-wifi-pi5-overlay.dts create mode 100644 arch/arm/boot/dts/overlays/i2c0-pi5-overlay.dts create mode 100644 arch/arm/boot/dts/overlays/i2c1-pi5-overlay.dts create mode 100644 arch/arm/boot/dts/overlays/i2c2-pi5-overlay.dts create mode 100644 arch/arm/boot/dts/overlays/i2c3-pi5-overlay.dts create mode 100644 arch/arm/boot/dts/overlays/midi-uart0-pi5-overlay.dts create mode 100644 arch/arm/boot/dts/overlays/midi-uart1-pi5-overlay.dts create mode 100644 arch/arm/boot/dts/overlays/midi-uart2-pi5-overlay.dts create mode 100644 arch/arm/boot/dts/overlays/midi-uart3-pi5-overlay.dts create mode 100644 arch/arm/boot/dts/overlays/midi-uart4-pi5-overlay.dts create mode 100644 arch/arm/boot/dts/overlays/spi2-1cs-pi5-overlay.dts create mode 100644 arch/arm/boot/dts/overlays/spi2-2cs-pi5-overlay.dts create mode 100644 arch/arm/boot/dts/overlays/spi3-1cs-pi5-overlay.dts create mode 100644 arch/arm/boot/dts/overlays/spi3-2cs-pi5-overlay.dts create mode 100644 arch/arm/boot/dts/overlays/spi5-1cs-pi5-overlay.dts create mode 100644 arch/arm/boot/dts/overlays/spi5-2cs-pi5-overlay.dts create mode 100755 arch/arm/boot/dts/overlays/uart0-pi5-overlay.dts create mode 100755 arch/arm/boot/dts/overlays/uart1-pi5-overlay.dts create mode 100755 arch/arm/boot/dts/overlays/uart2-pi5-overlay.dts create mode 100755 arch/arm/boot/dts/overlays/uart3-pi5-overlay.dts create mode 100755 arch/arm/boot/dts/overlays/uart4-pi5-overlay.dts create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-v3d-pi5-overlay.dts create mode 100644 arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts --- a/arch/arm/boot/dts/broadcom/bcm2708-rpi-b-plus.dts +++ b/arch/arm/boot/dts/broadcom/bcm2708-rpi-b-plus.dts @@ -193,6 +193,9 @@ i2c_arm: &i2c1 { i2c_vc: &i2c0 { }; +i2c_csi_dsi0: &i2c0 { +}; + / { __overrides__ { audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}"; --- a/arch/arm/boot/dts/broadcom/bcm2708-rpi-b-rev1.dts +++ b/arch/arm/boot/dts/broadcom/bcm2708-rpi-b-rev1.dts @@ -202,6 +202,9 @@ i2c_arm: &i2c0 { i2c_vc: &i2c1 { }; +i2c_csi_dsi0: &i2c0 { +}; + / { __overrides__ { audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}"; --- a/arch/arm/boot/dts/broadcom/bcm2708-rpi-b.dts +++ b/arch/arm/boot/dts/broadcom/bcm2708-rpi-b.dts @@ -184,6 +184,9 @@ i2c_arm: &i2c1 { i2c_vc: &i2c0 { }; +i2c_csi_dsi0: &i2c0 { +}; + / { __overrides__ { audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}"; --- a/arch/arm/boot/dts/broadcom/bcm2708-rpi-cm.dts +++ b/arch/arm/boot/dts/broadcom/bcm2708-rpi-cm.dts @@ -19,6 +19,9 @@ cam0_reg: &cam0_regulator { gpio = <&gpio 31 GPIO_ACTIVE_HIGH>; }; +i2c_csi_dsi0: &i2c0 { +}; + &uart0 { status = "okay"; }; --- a/arch/arm/boot/dts/broadcom/bcm2708-rpi-zero-w.dts +++ b/arch/arm/boot/dts/broadcom/bcm2708-rpi-zero-w.dts @@ -242,6 +242,7 @@ cam0_reg: &cam_dummy_reg { i2c_arm: &i2c1 {}; i2c_vc: &i2c0 {}; +i2c_csi_dsi0: &i2c0 {}; / { __overrides__ { --- a/arch/arm/boot/dts/broadcom/bcm2708-rpi-zero.dts +++ b/arch/arm/boot/dts/broadcom/bcm2708-rpi-zero.dts @@ -177,6 +177,7 @@ cam0_reg: &cam_dummy_reg { i2c_arm: &i2c1 {}; i2c_vc: &i2c0 {}; +i2c_csi_dsi0: &i2c0 {}; / { __overrides__ { --- a/arch/arm/boot/dts/broadcom/bcm2709-rpi-2-b.dts +++ b/arch/arm/boot/dts/broadcom/bcm2709-rpi-2-b.dts @@ -187,6 +187,9 @@ cam0_reg: &cam_dummy_reg { }; +i2c_csi_dsi0: &i2c0 { +}; + / { __overrides__ { audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}"; --- a/arch/arm/boot/dts/broadcom/bcm2709-rpi-cm2.dts +++ b/arch/arm/boot/dts/broadcom/bcm2709-rpi-cm2.dts @@ -21,6 +21,9 @@ cam0_reg: &cam0_regulator { gpio = <&gpio 30 GPIO_ACTIVE_HIGH>; }; +i2c_csi_dsi0: &i2c0 { +}; + &uart0 { status = "okay"; }; --- a/arch/arm/boot/dts/broadcom/bcm270x-rpi.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm270x-rpi.dtsi @@ -123,6 +123,9 @@ status = "disabled"; }; +i2s_clk_producer: &i2s {}; +i2s_clk_consumer: &i2s {}; + &clocks { firmware = <&firmware>; }; --- a/arch/arm/boot/dts/broadcom/bcm2710-rpi-2-b.dts +++ b/arch/arm/boot/dts/broadcom/bcm2710-rpi-2-b.dts @@ -187,6 +187,9 @@ cam0_reg: &cam_dummy_reg { }; +i2c_csi_dsi0: &i2c0 { +}; + / { __overrides__ { audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}"; --- a/arch/arm/boot/dts/broadcom/bcm2710-rpi-3-b-plus.dts +++ b/arch/arm/boot/dts/broadcom/bcm2710-rpi-3-b-plus.dts @@ -275,6 +275,9 @@ cam0_reg: &cam_dummy_reg { }; +i2c_csi_dsi0: &i2c0 { +}; + / { __overrides__ { audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}"; --- a/arch/arm/boot/dts/broadcom/bcm2710-rpi-3-b.dts +++ b/arch/arm/boot/dts/broadcom/bcm2710-rpi-3-b.dts @@ -284,6 +284,9 @@ cam0_reg: &cam_dummy_reg { }; +i2c_csi_dsi0: &i2c0 { +}; + / { __overrides__ { audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}"; --- a/arch/arm/boot/dts/broadcom/bcm2710-rpi-cm3.dts +++ b/arch/arm/boot/dts/broadcom/bcm2710-rpi-cm3.dts @@ -21,6 +21,9 @@ cam0_reg: &cam0_regulator { gpio = <&gpio 31 GPIO_ACTIVE_HIGH>; }; +i2c_csi_dsi0: &i2c0 { +}; + &uart0 { status = "okay"; }; --- a/arch/arm/boot/dts/broadcom/bcm2710-rpi-zero-2-w.dts +++ b/arch/arm/boot/dts/broadcom/bcm2710-rpi-zero-2-w.dts @@ -261,6 +261,9 @@ cam0_reg: &cam_dummy_reg { }; +i2c_csi_dsi0: &i2c0 { +}; + / { __overrides__ { audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_hdmi=0'}"; --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts @@ -396,6 +396,9 @@ cam0_reg: &cam_dummy_reg { }; +i2c_csi_dsi0: &i2c0 { +}; + / { __overrides__ { audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0'}"; --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4.dts +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4.dts @@ -405,6 +405,9 @@ cam0_reg: &cam1_reg { gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>; }; +i2c_csi_dsi0: &i2c0 { +}; + / { __overrides__ { audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_hdmi=0'}"; --- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4s.dts +++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4s.dts @@ -279,6 +279,9 @@ cam0_reg: &cam0_regulator { status = "disabled"; }; +i2c_csi_dsi0: &i2c0 { +}; + / { __overrides__ { audio = <&chosen>,"bootargs{on='snd_bcm2835.enable_hdmi=1',off='snd_bcm2835.enable_hdmi=0'}"; --- /dev/null +++ b/arch/arm/boot/dts/broadcom/bcm2712-rpi-5-b.dts @@ -0,0 +1,826 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include +#include +#include +#include +#include +#include + +#define i2c0 _i2c0 +#define i2c3 _i2c3 +#define i2c4 _i2c4 +#define i2c5 _i2c5 +#define i2c6 _i2c6 +#define i2c8 _i2c8 +#define i2s _i2s +#define pwm0 _pwm0 +#define pwm1 _pwm1 +#define spi0 _spi0 +#define spi3 _spi3 +#define spi4 _spi4 +#define spi5 _spi5 +#define spi6 _spi6 +#define uart0 _uart0 +#define uart2 _uart2 +#define uart3 _uart3 +#define uart4 _uart4 +#define uart5 _uart5 + +#include "bcm2712.dtsi" + +#undef i2c0 +#undef i2c3 +#undef i2c4 +#undef i2c5 +#undef i2c6 +#undef i2c8 +#undef i2s +#undef pwm0 +#undef pwm1 +#undef spi0 +#undef spi3 +#undef spi4 +#undef spi5 +#undef spi6 +#undef uart0 +#undef uart2 +#undef uart3 +#undef uart4 +#undef uart5 + +/ { + compatible = "raspberrypi,5-model-b", "brcm,bcm2712"; + model = "Raspberry Pi 5 Model B"; + + /* Will be filled by the bootloader */ + memory@0 { + device_type = "memory"; + reg = <0 0 0x28000000>; + }; + + leds: leds { + compatible = "gpio-leds"; + + pwr_led: led-pwr { + label = "PWR"; + gpios = <&rp1_gpio 44 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "none"; + }; + + act_led: led-act { + label = "ACT"; + gpios = <&gio_aon 9 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "mmc0"; + }; + }; + + sd_io_1v8_reg: sd_io_1v8_reg { + compatible = "regulator-gpio"; + regulator-name = "vdd-sd-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-settling-time-us = <5000>; + gpios = <&gio_aon 3 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 + 3300000 0x0>; + status = "okay"; + }; + + sd_vcc_reg: sd_vcc_reg { + compatible = "regulator-fixed"; + regulator-name = "vcc-sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpios = <&gio_aon 4 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + wl_on_reg: wl_on_reg { + compatible = "regulator-fixed"; + regulator-name = "wl-on-regulator"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-0 = <&wl_on_pins>; + pinctrl-names = "default"; + + gpio = <&gio 28 GPIO_ACTIVE_HIGH>; + + startup-delay-us = <150000>; + enable-active-high; + }; + + clocks: clocks { + }; + + cam1_clk: cam1_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + status = "disabled"; + }; + + cam0_clk: cam0_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + status = "disabled"; + }; + + cam0_reg: cam0_reg { + compatible = "regulator-fixed"; + regulator-name = "cam0_reg"; + enable-active-high; + status = "okay"; + gpio = <&rp1_gpio 34 0>; // CD0_IO0_MICCLK, to MIPI 0 connector + }; + + cam1_reg: cam1_reg { + compatible = "regulator-fixed"; + regulator-name = "cam1_reg"; + enable-active-high; + status = "okay"; + gpio = <&rp1_gpio 46 0>; // CD1_IO0_MICCLK, to MIPI 1 connector + }; + + cam_dummy_reg: cam_dummy_reg { + compatible = "regulator-fixed"; + regulator-name = "cam-dummy-reg"; + status = "okay"; + }; + + dummy: dummy { + // A target for unwanted overlay fragments + }; +}; + +rp1_target: &pcie2 { + brcm,vdm-qos-map = <0xbbaa9888>; + aspm-no-l0s; + status = "okay"; +}; + +// Add some labels to 2712 device + +// The system UART +uart10: &_uart0 { status = "okay"; }; + +// The system SPI for the bootloader EEPROM +spi10: &_spi0 { status = "okay"; }; + +i2c_rp1boot: &_i2c3 { }; + +#include "rp1.dtsi" + +&rp1 { + // PCIe address space layout: + // 00_00000000-00_00xxxxxx = RP1 peripherals + // 10_00000000-1x_xxxxxxxx = up to 64GB system RAM + + // outbound access aimed at PCIe 0_00xxxxxx -> RP1 c0_40xxxxxx + // This is the RP1 peripheral space + ranges = <0xc0 0x40000000 + 0x02000000 0x00 0x00000000 + 0x00 0x00400000>; + + dma-ranges = + // inbound RP1 1x_xxxxxxxx -> PCIe 1x_xxxxxxxx + <0x10 0x00000000 + 0x43000000 0x10 0x00000000 + 0x10 0x00000000>, + + // inbound RP1 c0_40xxxxxx -> PCIe 00_00xxxxxx + // This allows the RP1 DMA controller to address RP1 hardware + <0xc0 0x40000000 + 0x02000000 0x0 0x00000000 + 0x0 0x00400000>, + + // inbound RP1 0x_xxxxxxxx -> PCIe 1x_xxxxxxxx + <0x00 0x00000000 + 0x02000000 0x10 0x00000000 + 0x10 0x00000000>; +}; + +// Expose RP1 nodes as system nodes with labels + +&rp1_dma { + status = "okay"; +}; + +&rp1_eth { + status = "okay"; + phy-handle = <&phy1>; + phy-reset-gpios = <&rp1_gpio 32 GPIO_ACTIVE_LOW>; + phy-reset-duration = <5>; + + phy1: ethernet-phy@1 { + reg = <0x1>; + brcm,powerdown-enable; + }; +}; + +gpio: &rp1_gpio { + status = "okay"; +}; + +aux: &dummy {}; + +&rp1_usb0 { + pinctrl-0 = <&usb_vbus_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&rp1_usb1 { + status = "okay"; +}; + +#include "bcm2712-rpi.dtsi" + +// A few extra labels to keep overlays happy + +i2c0if: &rp1_gpio {}; +i2c0mux: &rp1_gpio {}; + +i2c_csi_dsi0: &i2c6 { // Note: This is for MIPI0 connector only + pinctrl-0 = <&rp1_i2c6_38_39>; + pinctrl-names = "default"; +}; + +i2c_csi_dsi1: &i2c4 { // Note: This is for MIPI1 connector only + pinctrl-0 = <&rp1_i2c4_40_41>; + pinctrl-names = "default"; +}; + +i2c_csi_dsi: &i2c_csi_dsi1 { }; // An alias for compatibility + +csi0: &rp1_csi0 { }; +csi1: &rp1_csi1 { }; +dsi0: &rp1_dsi0 { }; +dsi1: &rp1_dsi1 { }; +dpi: &rp1_dpi { }; +vec: &rp1_vec { }; +dpi_gpio0: &rp1_dpi_24bit_gpio0 { }; +dpi_gpio1: &rp1_dpi_24bit_gpio2 { }; +dpi_18bit_cpadhi_gpio0: &rp1_dpi_18bit_cpadhi_gpio0 { }; +dpi_18bit_cpadhi_gpio2: &rp1_dpi_18bit_cpadhi_gpio2 { }; +dpi_18bit_gpio0: &rp1_dpi_18bit_gpio0 { }; +dpi_18bit_gpio2: &rp1_dpi_18bit_gpio2 { }; +dpi_16bit_cpadhi_gpio0: &rp1_dpi_16bit_cpadhi_gpio0 { }; +dpi_16bit_cpadhi_gpio2: &rp1_dpi_16bit_cpadhi_gpio2 { }; +dpi_16bit_gpio0: &rp1_dpi_16bit_gpio0 { }; +dpi_16bit_gpio2: &rp1_dpi_16bit_gpio2 { }; + +/* Add the IOMMUs for some RP1 bus masters */ + +&csi0 { + iommus = <&iommu5>; +}; + +&csi1 { + iommus = <&iommu5>; +}; + +&dsi0 { + iommus = <&iommu5>; +}; + +&dsi1 { + iommus = <&iommu5>; +}; + +&dpi { + iommus = <&iommu5>; +}; + +&vec { + iommus = <&iommu5>; +}; + +&ddc0 { + status = "disabled"; +}; + +&ddc1 { + status = "disabled"; +}; + +&hdmi0 { + clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>; + clock-names = "hdmi", "bvb", "audio", "cec"; + status = "disabled"; +}; + +&hdmi1 { + clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>; + clock-names = "hdmi", "bvb", "audio", "cec"; + status = "disabled"; +}; + +&hvs { + clocks = <&firmware_clocks 4>, <&firmware_clocks 16>; + clock-names = "core", "disp"; +}; + +&mop { + status = "disabled"; +}; + +&moplet { + status = "disabled"; +}; + +&pixelvalve0 { + status = "disabled"; +}; + +&pixelvalve1 { + status = "disabled"; +}; + +&disp_intr { + status = "disabled"; +}; + +/* SDIO1 is used to drive the SD card */ +&sdio1 { + pinctrl-0 = <&emmc_sd_pulls>, <&emmc_aon_cd_pins>; + pinctrl-names = "default"; + vqmmc-supply = <&sd_io_1v8_reg>; + vmmc-supply = <&sd_vcc_reg>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-ddr50; + sd-uhs-sdr104; + //broken-cd; + //no-1-8-v; + status = "okay"; +}; + +&pinctrl_aon { + emmc_aon_cd_pins: emmc_aon_cd_pins { + function = "sd_card_g"; + pins = "aon_gpio5"; + bias-pull-up; + }; + + /* Slight hack - only one PWM pin (status LED) is usable */ + aon_pwm_1pin: aon_pwm_1pin { + function = "aon_pwm"; + pins = "aon_gpio9"; + }; +}; + +&pinctrl { + pwr_button_pins: pwr_button_pins { + function = "gpio"; + pins = "gpio20"; + bias-pull-up; + }; + + wl_on_pins: wl_on_pins { + function = "gpio"; + pins = "gpio28"; + }; + + bt_shutdown_pins: bt_shutdown_pins { + function = "gpio"; + pins = "gpio29"; + }; + + emmc_sd_pulls: emmc_sd_pulls { + function = "emmc_dat0", "emmc_dat1", "emmc_dat2", "emmc_dat3"; + bias-pull-up; + }; +}; + +/* uarta communicates with the BT module */ +&uarta { + uart-has-rtscts; + auto-flow-control; + status = "okay"; + clock-frequency = <96000000>; + pinctrl-0 = <&uarta_24_pins &bt_shutdown_pins>; + pinctrl-names = "default"; + + bluetooth: bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <3000000>; + shutdown-gpios = <&gio 29 GPIO_ACTIVE_HIGH>; + local-bd-address = [ 00 00 00 00 00 00 ]; + }; +}; + +&i2c_rp1boot { + clock-frequency = <400000>; + pinctrl-0 = <&i2c3_m4_agpio0_pins>; + pinctrl-names = "default"; +}; + +/ { + chosen: chosen { + bootargs = "coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1"; + stdout-path = "serial10:115200n8"; + }; + + fan: cooling_fan { + status = "disabled"; + compatible = "pwm-fan"; + #cooling-cells = <2>; + cooling-min-state = <0>; + cooling-max-state = <3>; + cooling-levels = <0 75 125 175 250>; + pwms = <&rp1_pwm1 3 41566 PWM_POLARITY_INVERTED>; + rpm-regmap = <&rp1_pwm1>; + rpm-offset = <0x3c>; + }; + + pwr_button { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pwr_button_pins>; + status = "okay"; + + pwr_key: pwr { + label = "pwr_button"; + // linux,code = <205>; // KEY_SUSPEND + linux,code = <116>; // KEY_POWER + gpios = <&gio 20 GPIO_ACTIVE_LOW>; + debounce-interval = <50>; // ms + }; + }; +}; + +&usb { + power-domains = <&power RPI_POWER_DOMAIN_USB>; +}; + +/* SDIO2 drives the WLAN interface */ +&sdio2 { + pinctrl-0 = <&sdio2_30_pins>; + pinctrl-names = "default"; + bus-width = <4>; + vmmc-supply = <&wl_on_reg>; + sd-uhs-ddr50; + non-removable; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + wifi: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + local-mac-address = [00 00 00 00 00 00]; + }; +}; + +&rpivid { + status = "okay"; +}; + +&pinctrl { + spi10_gpio2: spi10_gpio2 { + function = "vc_spi0"; + pins = "gpio2", "gpio3", "gpio4"; + bias-disable; + }; + + spi10_cs_gpio1: spi10_cs_gpio1 { + function = "gpio"; + pins = "gpio1"; + bias-pull-up; + }; +}; + +spi10_pins: &spi10_gpio2 {}; +spi10_cs_pins: &spi10_cs_gpio1 {}; + +&spi10 { + pinctrl-names = "default"; + cs-gpios = <&gio 1 1>; + pinctrl-0 = <&spi10_pins &spi10_cs_pins>; + + spidev10: spidev@0 { + compatible = "spidev"; + reg = <0>; /* CE0 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <20000000>; + status = "okay"; + }; +}; + +// ============================================= +// Board specific stuff here + +&gio_aon { + // Don't use GIO_AON as an interrupt controller because it will + // clash with the firmware monitoring the PMIC interrupt via the VPU. + + /delete-property/ interrupt-controller; +}; + +&main_aon_irq { + // Don't use the MAIN_AON_IRQ interrupt controller because it will + // clash with the firmware monitoring the PMIC interrupt via the VPU. + + status = "disabled"; +}; + +&rp1_pwm1 { + status = "disabled"; + pinctrl-0 = <&rp1_pwm1_gpio45>; + pinctrl-names = "default"; +}; + +&thermal_trips { + cpu_tepid: cpu-tepid { + temperature = <50000>; + hysteresis = <5000>; + type = "active"; + }; + + cpu_warm: cpu-warm { + temperature = <60000>; + hysteresis = <5000>; + type = "active"; + }; + + cpu_hot: cpu-hot { + temperature = <67500>; + hysteresis = <5000>; + type = "active"; + }; + + cpu_vhot: cpu-vhot { + temperature = <75000>; + hysteresis = <5000>; + type = "active"; + }; +}; + +&cooling_maps { + tepid { + trip = <&cpu_tepid>; + cooling-device = <&fan 1 1>; + }; + + warm { + trip = <&cpu_warm>; + cooling-device = <&fan 2 2>; + }; + + hot { + trip = <&cpu_hot>; + cooling-device = <&fan 3 3>; + }; + + vhot { + trip = <&cpu_vhot>; + cooling-device = <&fan 4 4>; + }; + + melt { + trip = <&cpu_crit>; + cooling-device = <&fan 4 4>; + }; +}; + +&gio { + // The GPIOs above 35 are not used on Pi 5, so shrink the upper bank + // to reduce the clutter in gpioinfo/pinctrl + brcm,gpio-bank-widths = <32 4>; + + gpio-line-names = + "-", // GPIO_000 + "2712_BOOT_CS_N", // GPIO_001 + "2712_BOOT_MISO", // GPIO_002 + "2712_BOOT_MOSI", // GPIO_003 + "2712_BOOT_SCLK", // GPIO_004 + "-", // GPIO_005 + "-", // GPIO_006 + "-", // GPIO_007 + "-", // GPIO_008 + "-", // GPIO_009 + "-", // GPIO_010 + "-", // GPIO_011 + "-", // GPIO_012 + "-", // GPIO_013 + "PCIE_SDA", // GPIO_014 + "PCIE_SCL", // GPIO_015 + "-", // GPIO_016 + "-", // GPIO_017 + "-", // GPIO_018 + "-", // GPIO_019 + "PWR_GPIO", // GPIO_020 + "2712_G21_FS", // GPIO_021 + "-", // GPIO_022 + "-", // GPIO_023 + "BT_RTS", // GPIO_024 + "BT_CTS", // GPIO_025 + "BT_TXD", // GPIO_026 + "BT_RXD", // GPIO_027 + "WL_ON", // GPIO_028 + "BT_ON", // GPIO_029 + "WIFI_SDIO_CLK", // GPIO_030 + "WIFI_SDIO_CMD", // GPIO_031 + "WIFI_SDIO_D0", // GPIO_032 + "WIFI_SDIO_D1", // GPIO_033 + "WIFI_SDIO_D2", // GPIO_034 + "WIFI_SDIO_D3"; // GPIO_035 +}; + +&gio_aon { + gpio-line-names = + "RP1_SDA", // AON_GPIO_00 + "RP1_SCL", // AON_GPIO_01 + "RP1_RUN", // AON_GPIO_02 + "SD_IOVDD_SEL", // AON_GPIO_03 + "SD_PWR_ON", // AON_GPIO_04 + "SD_CDET_N", // AON_GPIO_05 + "SD_FLG_N", // AON_GPIO_06 + "-", // AON_GPIO_07 + "2712_WAKE", // AON_GPIO_08 + "2712_STAT_LED", // AON_GPIO_09 + "-", // AON_GPIO_10 + "-", // AON_GPIO_11 + "PMIC_INT", // AON_GPIO_12 + "UART_TX_FS", // AON_GPIO_13 + "UART_RX_FS", // AON_GPIO_14 + "-", // AON_GPIO_15 + "-", // AON_GPIO_16 + + // Pad bank0 out to 32 entries + "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", + + "HDMI0_SCL", // AON_SGPIO_00 + "HDMI0_SDA", // AON_SGPIO_01 + "HDMI1_SCL", // AON_SGPIO_02 + "HDMI1_SDA", // AON_SGPIO_03 + "PMIC_SCL", // AON_SGPIO_04 + "PMIC_SDA"; // AON_SGPIO_05 + + rp1_run_hog { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "RP1 RUN pin"; + }; +}; + +&rp1_gpio { + gpio-line-names = + "ID_SD", // GPIO0 + "ID_SC", // GPIO1 + "PIN3", // GPIO2 + "PIN5", // GPIO3 + "PIN7", // GPIO4 + "PIN29", // GPIO5 + "PIN31", // GPIO6 + "PIN26", // GPIO7 + "PIN24", // GPIO8 + "PIN21", // GPIO9 + "PIN19", // GPIO10 + "PIN23", // GPIO11 + "PIN32", // GPIO12 + "PIN33", // GPIO13 + "PIN8", // GPIO14 + "PIN10", // GPIO15 + "PIN36", // GPIO16 + "PIN11", // GPIO17 + "PIN12", // GPIO18 + "PIN35", // GPIO19 + "PIN38", // GPIO20 + "PIN40", // GPIO21 + "PIN15", // GPIO22 + "PIN16", // GPIO23 + "PIN18", // GPIO24 + "PIN22", // GPIO25 + "PIN37", // GPIO26 + "PIN13", // GPIO27 + + "PCIE_RP1_WAKE", // GPIO28 + "FAN_TACH", // GPIO29 + "HOST_SDA", // GPIO30 + "HOST_SCL", // GPIO31 + "ETH_RST_N", // GPIO32 + "-", // GPIO33 + + "CD0_IO0_MICCLK", // GPIO34 + "CD0_IO0_MICDAT0", // GPIO35 + "RP1_PCIE_CLKREQ_N", // GPIO36 + "-", // GPIO37 + "CD0_SDA", // GPIO38 + "CD0_SCL", // GPIO39 + "CD1_SDA", // GPIO40 + "CD1_SCL", // GPIO41 + "USB_VBUS_EN", // GPIO42 + "USB_OC_N", // GPIO43 + "RP1_STAT_LED", // GPIO44 + "FAN_PWM", // GPIO45 + "CD1_IO0_MICCLK", // GPIO46 + "2712_WAKE", // GPIO47 + "CD1_IO1_MICDAT1", // GPIO48 + "EN_MAX_USB_CUR", // GPIO49 + "-", // GPIO50 + "-", // GPIO51 + "-", // GPIO52 + "-"; // GPIO53 + + usb_vbus_pins: usb_vbus_pins { + function = "vbus1"; + pins = "gpio42", "gpio43"; + }; +}; + +/ { + aliases: aliases { + blconfig = &blconfig; + bluetooth = &bluetooth; + console = &uart10; + ethernet0 = &rp1_eth; + wifi0 = &wifi; + fb = &fb; + mailbox = &mailbox; + mmc0 = &sdio1; + uart0 = &uart0; + uart1 = &uart1; + uart2 = &uart2; + uart3 = &uart3; + uart4 = &uart4; + uart10 = &uart10; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial10 = &uart10; + i2c = &i2c_arm; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c10 = &i2c_rp1boot; + // Bit-bashed i2c_gpios start at 10 + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + spi4 = &spi4; + spi5 = &spi5; + spi10 = &spi10; + gpio0 = &gpio; + gpio1 = &gio; + gpio2 = &gio_aon; + gpio3 = &pinctrl; + gpio4 = &pinctrl_aon; + usb0 = &rp1_usb0; + usb1 = &rp1_usb1; + drm_dsi1 = &dsi0; + drm_dsi2 = &dsi1; + }; + + __overrides__ { + bdaddr = <&bluetooth>, "local-bd-address["; + button_debounce = <&pwr_key>, "debounce-interval:0"; + cooling_fan = <&fan>, "status", <&rp1_pwm1>, "status"; + uart0_console = <&uart0>,"status", <&aliases>, "console=",&uart0; + i2c0 = <&i2c0>, "status"; + i2c1 = <&i2c1>, "status"; + i2c = <&i2c1>, "status"; + i2c_arm = <&i2c_arm>, "status"; + i2c_vc = <&i2c_vc>, "status"; + i2c_csi_dsi = <&i2c_csi_dsi>, "status"; + i2c_csi_dsi0 = <&i2c_csi_dsi0>, "status"; + i2c_csi_dsi1 = <&i2c_csi_dsi1>, "status"; + i2c0_baudrate = <&i2c0>, "clock-frequency:0"; + i2c1_baudrate = <&i2c1>, "clock-frequency:0"; + i2c_baudrate = <&i2c_arm>, "clock-frequency:0"; + i2c_arm_baudrate = <&i2c_arm>, "clock-frequency:0"; + i2c_vc_baudrate = <&i2c_vc>, "clock-frequency:0"; + nvme = <&pciex1>, "status"; + pciex1 = <&pciex1>, "status"; + pciex1_gen = <&pciex1> , "max-link-speed:0"; + pciex1_no_l0s = <&pciex1>, "aspm-no-l0s?"; + random = <&random>, "status"; + rtc_bbat_vchg = <&rpi_rtc>, "trickle-charge-microvolt:0"; + spi = <&spi0>, "status"; + suspend = <&pwr_key>, "linux,code:0=205"; + uart0 = <&uart0>, "status"; + wifiaddr = <&wifi>, "local-mac-address["; + + act_led_activelow = <&act_led>, "active-low?"; + act_led_trigger = <&act_led>, "linux,default-trigger"; + pwr_led_activelow = <&pwr_led>, "gpios:8"; + pwr_led_trigger = <&pwr_led>, "linux,default-trigger"; + }; +}; --- /dev/null +++ b/arch/arm/boot/dts/broadcom/bcm2712-rpi.dtsi @@ -0,0 +1,281 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include + +&soc { + firmware: firmware { + compatible = "raspberrypi,bcm2835-firmware", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + + mboxes = <&mailbox>; + dma-ranges; + + firmware_clocks: clocks { + compatible = "raspberrypi,firmware-clocks"; + #clock-cells = <1>; + }; + + reset: reset { + compatible = "raspberrypi,firmware-reset"; + #reset-cells = <1>; + }; + + vcio: vcio { + compatible = "raspberrypi,vcio"; + }; + }; + + power: power { + compatible = "raspberrypi,bcm2835-power"; + firmware = <&firmware>; + #power-domain-cells = <1>; + }; + + fb: fb { + compatible = "brcm,bcm2708-fb"; + firmware = <&firmware>; + status = "okay"; + }; + + rpi_rtc: rpi_rtc { + compatible = "raspberrypi,rpi-rtc"; + firmware = <&firmware>; + status = "okay"; + trickle-charge-microvolt = <0>; + }; + + /* Define these notional regulators for use by overlays, etc. */ + vdd_3v3_reg: fixedregulator_3v3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3v3"; + }; + + vdd_5v0_reg: fixedregulator_5v0 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "5v0"; + }; +}; + +/ { + __overrides__ { + arm_freq; + }; +}; + +pciex1: &pcie1 { }; +pciex4: &pcie2 { }; + +&dma32 { + /* The VPU firmware uses DMA channel 11 for VCHIQ */ + brcm,dma-channel-mask = <0x03f>; +}; + +&dma40 { + /* The VPU firmware DMA channel 11 for VCHIQ */ + brcm,dma-channel-mask = <0x07c0>; +}; + +&hdmi0 { + dmas = <&dma40 (10|(1<<30)|(1<<24)|(10<<16)|(15<<20))>; +}; + +&hdmi1 { + dmas = <&dma40 (17|(1<<30)|(1<<24)|(10<<16)|(15<<20))>; +}; + +&spi10 { + dmas = <&dma40 6>, <&dma40 7>; + dma-names = "tx", "rx"; +}; + +&usb { + power-domains = <&power RPI_POWER_DOMAIN_USB>; +}; + +&rmem { + /* + * RPi4's co-processor will copy the board's bootloader configuration + * into memory for the OS to consume. It'll also update this node with + * its placement information. + */ + blconfig: nvram@0 { + compatible = "raspberrypi,bootloader-config", "nvmem-rmem"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x0 0x0>; + no-map; + status = "disabled"; + }; +}; + +&rp1_adc { + status = "okay"; +}; + +/* Add some gpiomem nodes to make the devices accessible to userspace. + * /dev/gpiomem should expose the registers for the interface with DT alias + * gpio. + */ + +&rp1 { + gpiomem@d0000 { + /* Export IO_BANKs, RIO_BANKs and PADS_BANKs to userspace */ + compatible = "raspberrypi,gpiomem"; + reg = <0xc0 0x400d0000 0x0 0x30000>; + chardev-name = "gpiomem0"; + }; +}; + +&soc { + gpiomem@7d508500 { + compatible = "raspberrypi,gpiomem"; + reg = <0x7d508500 0x40>; + chardev-name = "gpiomem1"; + }; + + gpiomem@7d517c00 { + compatible = "raspberrypi,gpiomem"; + reg = <0x7d517c00 0x40>; + chardev-name = "gpiomem2"; + }; + + gpiomem@7d504100 { + compatible = "raspberrypi,gpiomem"; + reg = <0x7d504100 0x20>; + chardev-name = "gpiomem3"; + }; + + gpiomem@7d510700 { + compatible = "raspberrypi,gpiomem"; + reg = <0x7d510700 0x20>; + chardev-name = "gpiomem4"; + }; +}; + +i2c0: &rp1_i2c0 { }; +i2c1: &rp1_i2c1 { }; +i2c2: &rp1_i2c2 { }; +i2c3: &rp1_i2c3 { }; +i2c4: &rp1_i2c4 { }; +i2c5: &rp1_i2c5 { }; +i2c6: &rp1_i2c6 { }; +i2s: &rp1_i2s0 { }; +i2s_clk_producer: &rp1_i2s0 { }; +i2s_clk_consumer: &rp1_i2s1 { }; +pwm0: &rp1_pwm0 { }; +pwm1: &rp1_pwm1 { }; +pwm: &pwm0 { }; +spi0: &rp1_spi0 { }; +spi1: &rp1_spi1 { }; +spi2: &rp1_spi2 { }; +spi3: &rp1_spi3 { }; +spi4: &rp1_spi4 { }; +spi5: &rp1_spi5 { }; + +uart0_pins: &rp1_uart0_14_15 {}; +uart0_ctsrts_pins: &rp1_uart0_ctsrts_16_17 {}; +uart0: &rp1_uart0 { + pinctrl-0 = <&uart0_pins>; +}; + +uart1_pins: &rp1_uart1_0_1 {}; +uart1_ctsrts_pins: &rp1_uart1_ctsrts_2_3 {}; +uart1: &rp1_uart1 { }; + +uart2_pins: &rp1_uart2_4_5 {}; +uart2_ctsrts_pins: &rp1_uart2_ctsrts_6_7 {}; +uart2: &rp1_uart2 { }; + +uart3_pins: &rp1_uart3_8_9 {}; +uart3_ctsrts_pins: &rp1_uart3_ctsrts_10_11 {}; +uart3: &rp1_uart3 { }; + +uart4_pins: &rp1_uart4_12_13 {}; +uart4_ctsrts_pins: &rp1_uart4_ctsrts_14_15 {}; +uart4: &rp1_uart4 { }; + +i2c_vc: &i2c0 { // This is pins 27,28 on the header (not MIPI) + pinctrl-0 = <&rp1_i2c0_0_1>; + pinctrl-names = "default"; +}; + +i2c_arm: &i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&rp1_i2c1_2_3>; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&rp1_i2c2_4_5>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&rp1_i2c3_6_7>; +}; + +&i2s_clk_producer { + pinctrl-names = "default"; + pinctrl-0 = <&rp1_i2s0_18_21>; +}; + +&i2s_clk_consumer { + pinctrl-names = "default"; + pinctrl-0 = <&rp1_i2s1_18_21>; +}; + +spi0_pins: &rp1_spi0_gpio9 {}; +spi0_cs_pins: &rp1_spi0_cs_gpio7 {}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins &spi0_cs_pins>; + cs-gpios = <&gpio 8 1>, <&gpio 7 1>; + + spidev0: spidev@0 { + compatible = "spidev"; + reg = <0>; /* CE0 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <125000000>; + }; + + spidev1: spidev@1 { + compatible = "spidev"; + reg = <1>; /* CE1 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <125000000>; + }; +}; + +spi2_pins: &rp1_spi2_gpio1 {}; +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins>; +}; + +spi3_pins: &rp1_spi3_gpio5 {}; +&spi3 { + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins>; +}; + +spi4_pins: &rp1_spi4_gpio9 {}; +&spi4 { + pinctrl-names = "default"; + pinctrl-0 = <&spi4_pins>; +}; + +spi5_pins: &rp1_spi5_gpio13 {}; +&spi5 { + pinctrl-names = "default"; + pinctrl-0 = <&spi5_pins>; +}; --- /dev/null +++ b/arch/arm/boot/dts/broadcom/bcm2712.dtsi @@ -0,0 +1,1286 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include + +/ { + compatible = "brcm,bcm2712", "brcm,bcm2711"; + model = "BCM2712"; + + #address-cells = <2>; + #size-cells = <1>; + + interrupt-parent = <&gicv2>; + + rmem: reserved-memory { + #address-cells = <2>; + #size-cells = <1>; + ranges; + + atf@0 { + reg = <0x0 0x0 0x80000>; + no-map; + }; + + cma: linux,cma { + compatible = "shared-dma-pool"; + size = <0x4000000>; /* 64MB */ + reusable; + linux,cma-default; + + /* + * arm64 reserves the CMA by default somewhere in + * ZONE_DMA32, that's not good enough for the BCM2711 + * as some devices can only address the lower 1G of + * memory (ZONE_DMA). + */ + alloc-ranges = <0x0 0x00000000 0x40000000>; + }; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <2000>; + polling-delay = <1000>; + coefficients = <(-550) 450000>; + thermal-sensors = <&thermal>; + + thermal_trips: trips { + cpu_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling_maps: cooling-maps { + }; + }; + }; + + clk_27MHz: clk-27M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <27000000>; + clock-output-names = "27MHz-clock"; + }; + + clk_108MHz: clk-108M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <108000000>; + clock-output-names = "108MHz-clock"; + }; + + hvs: hvs@107c580000 { + compatible = "brcm,bcm2712-hvs"; + reg = <0x10 0x7c580000 0x1a000>; + interrupt-parent = <&disp_intr>; + interrupts = <2>, <9>, <16>; + interrupt-names = "ch0-eof", "ch1-eof", "ch2-eof"; + //iommus = <&iommu4>; + status = "disabled"; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x7c000000 0x10 0x7c000000 0x04000000>; + /* Emulate a contiguous 30-bit address range for DMA */ + dma-ranges = <0xc0000000 0x00 0x00000000 0x40000000>, + <0x7c000000 0x10 0x7c000000 0x04000000>; + + system_timer: timer@7c003000 { + compatible = "brcm,bcm2835-system-timer"; + reg = <0x7c003000 0x1000>; + interrupts = , + , + , + ; + clock-frequency = <1000000>; + }; + + firmwarekms: firmwarekms@7d503000 { + compatible = "raspberrypi,rpi-firmware-kms"; + /* SUN_L2 interrupt reg */ + reg = <0x7d503000 0x18>; + interrupt-parent = <&cpu_l2_irq>; + interrupts = <19>; + brcm,firmware = <&firmware>; + status = "disabled"; + }; + + mailbox: mailbox@7c013880 { + compatible = "brcm,bcm2835-mbox"; + reg = <0x7c013880 0x40>; + interrupts = ; + #mbox-cells = <0>; + }; + + pixelvalve0: pixelvalve@7c410000 { + compatible = "brcm,bcm2712-pixelvalve0"; + reg = <0x7c410000 0x100>; + interrupts = ; + status = "disabled"; + }; + + pixelvalve1: pixelvalve@7c411000 { + compatible = "brcm,bcm2712-pixelvalve1"; + reg = <0x7c411000 0x100>; + interrupts = ; + status = "disabled"; + }; + + usb: usb@7c480000 { + compatible = "brcm,bcm2835-usb"; + reg = <0x7c480000 0x10000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk_usb>; + clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + mop: mop@7c500000 { + compatible = "brcm,bcm2712-mop"; + reg = <0x7c500000 0x20>; + interrupt-parent = <&disp_intr>; + interrupts = <1>; + status = "disabled"; + }; + + moplet: moplet@7c501000 { + compatible = "brcm,bcm2712-moplet"; + reg = <0x7c501000 0x20>; + interrupt-parent = <&disp_intr>; + interrupts = <0>; + status = "disabled"; + }; + + disp_intr: interrupt-controller@7c502000 { + compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc"; + reg = <0x7c502000 0x30>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + status = "disabled"; + }; + + dvp: clock@7c700000 { + compatible = "brcm,brcm2711-dvp"; + reg = <0x7c700000 0x10>; + clocks = <&clk_108MHz>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + /* + * This node is the provider for the enable-method for + * bringing up secondary cores. + */ + local_intc: local_intc@7cd00000 { + compatible = "brcm,bcm2836-l1-intc"; + reg = <0x7cd00000 0x100>; + }; + + uart0: serial@7d001000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7d001000 0x200>; + interrupts = ; + clocks = <&clk_uart>, + <&clk_vpu>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + uart2: serial@7d001400 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7d001400 0x200>; + interrupts = ; + clocks = <&clk_uart>, + <&clk_vpu>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + uart3: serial@7d001600 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7d001600 0x200>; + interrupts = ; + clocks = <&clk_uart>, + <&clk_vpu>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + uart4: serial@7d001800 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7d001800 0x200>; + interrupts = ; + clocks = <&clk_uart>, + <&clk_vpu>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + uart5: serial@7d001a00 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x7d001a00 0x200>; + interrupts = ; + clocks = <&clk_uart>, + <&clk_vpu>; + clock-names = "uartclk", "apb_pclk"; + arm,primecell-periphid = <0x00241011>; + status = "disabled"; + }; + + sdhost: mmc@7d002000 { + compatible = "brcm,bcm2835-sdhost"; + reg = <0x7d002000 0x100>; + //interrupts = ; + clocks = <&clk_vpu>; + status = "disabled"; + }; + + i2s: i2s@7d003000 { + compatible = "brcm,bcm2835-i2s"; + reg = <0x7d003000 0x24>; + //clocks = <&cprman BCM2835_CLOCK_PCM>; + status = "disabled"; + }; + + spi0: spi@7d004000 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7d004000 0x200>; + interrupts = ; + clocks = <&clk_vpu>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@7d004600 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7d004600 0x0200>; + interrupts = ; + clocks = <&clk_vpu>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@7d004800 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7d004800 0x0200>; + interrupts = ; + clocks = <&clk_vpu>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@7d004a00 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7d004a00 0x0200>; + interrupts = ; + clocks = <&clk_vpu>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@7d004c00 { + compatible = "brcm,bcm2835-spi"; + reg = <0x7d004c00 0x0200>; + interrupts = ; + clocks = <&clk_vpu>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@7d005000 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7d005000 0x20>; + interrupts = ; + clocks = <&clk_vpu>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@7d005600 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7d005600 0x20>; + interrupts = ; + clocks = <&clk_vpu>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@7d005800 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7d005800 0x20>; + interrupts = ; + clocks = <&clk_vpu>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@7d005a00 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7d005a00 0x20>; + interrupts = ; + clocks = <&clk_vpu>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@7d005c00 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7d005c00 0x20>; + interrupts = ; + clocks = <&clk_vpu>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c8: i2c@7d005e00 { + compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; + reg = <0x7d005e00 0x20>; + interrupts = ; + clocks = <&clk_vpu>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pwm0: pwm@7d00c000 { + compatible = "brcm,bcm2835-pwm"; + reg = <0x7d00c000 0x28>; + assigned-clock-rates = <10000000>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm1: pwm@7d00c800 { + compatible = "brcm,bcm2835-pwm"; + reg = <0x7d00c800 0x28>; + assigned-clock-rates = <10000000>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pm: watchdog@7d200000 { + compatible = "brcm,bcm2712-pm"; + reg = <0x7d200000 0x308>; + reg-names = "pm"; + #power-domain-cells = <1>; + #reset-cells = <1>; + //clocks = <&cprman BCM2835_CLOCK_V3D>, + // <&cprman BCM2835_CLOCK_PERI_IMAGE>, + // <&cprman BCM2835_CLOCK_H264>, + // <&cprman BCM2835_CLOCK_ISP>; + clock-names = "v3d", "peri_image", "h264", "isp"; + system-power-controller; + }; + + cprman: cprman@7d202000 { + compatible = "brcm,bcm2711-cprman"; + reg = <0x7d202000 0x2000>; + #clock-cells = <1>; + + /* CPRMAN derives almost everything from the + * platform's oscillator. However, the DSI + * pixel clocks come from the DSI analog PHY. + */ + clocks = <&clk_osc>; + status = "disabled"; + }; + + random: rng@7d208000 { + compatible = "brcm,bcm2711-rng200"; + reg = <0x7d208000 0x28>; + status = "okay"; + }; + + cpu_l2_irq: intc@7d503000 { + compatible = "brcm,l2-intc"; + reg = <0x7d503000 0x18>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + }; + + pinctrl: pinctrl@7d504100 { + compatible = "brcm,bcm2712-pinctrl"; + reg = <0x7d504100 0x30>; + + uarta_24_pins: uarta_24_pins { + pin_rts { + function = "uart0"; + pins = "gpio24"; + bias-disable; + }; + pin_cts { + function = "uart0"; + pins = "gpio25"; + bias-pull-up; + }; + pin_txd { + function = "uart0"; + pins = "gpio26"; + bias-disable; + }; + pin_rxd { + function = "uart0"; + pins = "gpio27"; + bias-pull-up; + }; + }; + + sdio2_30_pins: sdio2_30_pins { + pin_clk { + function = "sd2"; + pins = "gpio30"; + bias-disable; + }; + pin_cmd { + function = "sd2"; + pins = "gpio31"; + bias-pull-up; + }; + pins_dat { + function = "sd2"; + pins = "gpio32", "gpio33", "gpio34", "gpio35"; + bias-pull-up; + }; + }; + }; + + ddc0: i2c@7d508200 { + compatible = "brcm,brcmstb-i2c"; + reg = <0x7d508200 0x58>; + interrupt-parent = <&bsc_irq>; + interrupts = <1>; + clock-frequency = <200000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ddc1: i2c@7d508280 { + compatible = "brcm,brcmstb-i2c"; + reg = <0x7d508280 0x58>; + interrupt-parent = <&bsc_irq>; + interrupts = <2>; + clock-frequency = <200000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + bscd: i2c@7d508300 { + compatible = "brcm,brcmstb-i2c"; + reg = <0x7d508300 0x58>; + interrupt-parent = <&bsc_irq>; + interrupts = <0>; + clock-frequency = <200000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + bsc_irq: intc@7d508380 { + compatible = "brcm,bcm7271-l2-intc"; + reg = <0x7d508380 0x10>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + }; + + main_irq: intc@7d508400 { + compatible = "brcm,bcm7271-l2-intc"; + reg = <0x7d508400 0x10>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gio: gpio@7d508500 { + compatible = "brcm,brcmstb-gpio"; + reg = <0x7d508500 0x40>; + interrupt-parent = <&main_irq>; + interrupts = <0>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + brcm,gpio-bank-widths = <32 22>; + brcm,gpio-direct; + }; + + uarta: serial@7d50c000 { + compatible = "brcm,bcm7271-uart"; + reg = <0x7d50c000 0x20>; + reg-names = "uart"; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = ; + skip-init; + status = "disabled"; + }; + + uartb: serial@7d50d000 { + compatible = "brcm,bcm7271-uart"; + reg = <0x7d50d000 0x20>; + reg-names = "uart"; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = ; + skip-init; + status = "disabled"; + }; + + uartc: serial@7d50e000 { + compatible = "brcm,bcm7271-uart"; + reg = <0x7d50e000 0x20>; + reg-names = "uart"; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = ; + skip-init; + status = "disabled"; + }; + + aon_intr: interrupt-controller@7d510600 { + compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc"; + reg = <0x7d510600 0x30>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + status = "disabled"; + }; + + pinctrl_aon: pinctrl@7d510700 { + compatible = "brcm,bcm2712-aon-pinctrl"; + reg = <0x7d510700 0x20>; + + i2c3_m4_agpio0_pins: i2c3_m4_agpio0_pins { + function = "vc_i2c3"; + pins = "aon_gpio0", "aon_gpio1"; + bias-pull-up; + }; + + bsc_m1_agpio13_pins: bsc_m1_agpio13_pins { + function = "bsc_m1"; + pins = "aon_gpio13", "aon_gpio14"; + bias-pull-up; + }; + + bsc_pmu_sgpio4_pins: bsc_pmu_sgpio4_pins { + function = "avs_pmu_bsc"; + pins = "aon_sgpio4", "aon_sgpio5"; + }; + + bsc_m2_sgpio4_pins: bsc_m2_sgpio4_pins { + function = "bsc_m2"; + pins = "aon_sgpio4", "aon_sgpio5"; + }; + + pwm_aon_agpio1_pins: pwm_aon_agpio1_pins { + function = "aon_pwm"; + pins = "aon_gpio1", "aon_gpio2"; + }; + + pwm_aon_agpio4_pins: pwm_aon_agpio4_pins { + function = "vc_pwm0"; + pins = "aon_gpio4", "aon_gpio5"; + }; + + pwm_aon_agpio7_pins: pwm_aon_agpio7_pins { + function = "aon_pwm"; + pins = "aon_gpio7", "aon_gpio9"; + }; + }; + + intc@7d517000 { + compatible = "brcm,bcm7271-l2-intc"; + reg = <0x7d517000 0x10>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + status = "disabled"; + }; + + bscc: i2c@7d517a00 { + compatible = "brcm,brcmstb-i2c"; + reg = <0x7d517a00 0x58>; + interrupt-parent = <&bsc_aon_irq>; + interrupts = <0>; + clock-frequency = <200000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pwm_aon: pwm@7d517a80 { + compatible = "brcm,bcm7038-pwm"; + reg = <0x7d517a80 0x28>; + #pwm-cells = <2>; + clocks = <&clk_27MHz>; + }; + + main_aon_irq: intc@7d517ac0 { + compatible = "brcm,bcm7271-l2-intc"; + reg = <0x7d517ac0 0x10>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + }; + + bsc_aon_irq: intc@7d517b00 { + compatible = "brcm,bcm7271-l2-intc"; + reg = <0x7d517b00 0x10>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gio_aon: gpio@7d517c00 { + compatible = "brcm,brcmstb-gpio"; + reg = <0x7d517c00 0x40>; + interrupt-parent = <&main_aon_irq>; + interrupts = <0>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + brcm,gpio-bank-widths = <17 6>; + brcm,gpio-direct; + }; + + avs_monitor: avs-monitor@7d542000 { + compatible = "brcm,bcm2711-avs-monitor", + "syscon", "simple-mfd"; + reg = <0x7d542000 0xf00>; + status = "okay"; + + thermal: thermal { + compatible = "brcm,bcm2711-thermal"; + #thermal-sensor-cells = <0>; + }; + }; + + bsc_pmu: i2c@7d544000 { + compatible = "brcm,brcmstb-i2c"; + reg = <0x7d544000 0x58>; + interrupt-parent = <&bsc_aon_irq>; + interrupts = <1>; + clock-frequency = <200000>; + status = "disabled"; + }; + + hdmi0: hdmi@7ef00700 { + compatible = "brcm,bcm2712-hdmi0"; + reg = <0x7c701400 0x300>, + <0x7c701000 0x200>, + <0x7c701d00 0x300>, + <0x7c702000 0x80>, + <0x7c703800 0x200>, + <0x7c704000 0x800>, + <0x7c700100 0x80>, + <0x7d510800 0x100>, + <0x7c720000 0x100>; + reg-names = "hdmi", + "dvp", + "phy", + "rm", + "packet", + "metadata", + "csc", + "cec", + "hd"; + resets = <&dvp 1>; + interrupt-parent = <&aon_intr>; + interrupts = <1>, <2>, <3>, + <7>, <8>; + interrupt-names = "cec-tx", "cec-rx", "cec-low", + "hpd-connected", "hpd-removed"; + ddc = <&ddc0>; + dmas = <&dma32 10>; + dma-names = "audio-rx"; + status = "disabled"; + }; + + hdmi1: hdmi@7ef05700 { + compatible = "brcm,bcm2712-hdmi1"; + reg = <0x7c706400 0x300>, + <0x7c706000 0x200>, + <0x7c706d00 0x300>, + <0x7c707000 0x80>, + <0x7c708800 0x200>, + <0x7c709000 0x800>, + <0x7c700180 0x80>, + <0x7d511000 0x100>, + <0x7c720000 0x100>; + reg-names = "hdmi", + "dvp", + "phy", + "rm", + "packet", + "metadata", + "csc", + "cec", + "hd"; + ddc = <&ddc1>; + resets = <&dvp 2>; + interrupt-parent = <&aon_intr>; + interrupts = <11>, <12>, <13>, + <14>, <15>; + interrupt-names = "cec-tx", "cec-rx", "cec-low", + "hpd-connected", "hpd-removed"; + dmas = <&dma32 17>; + dma-names = "audio-rx"; + status = "disabled"; + }; + + sound: sound { + }; + }; + + arm-pmu { + compatible = "arm,cortex-a76-pmu"; + interrupts = , + , + , + ; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + /* This only applies to the ARMv7 stub */ + arm,cpu-registers-not-fw-configured; + }; + + cpus: cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x000>; + enable-method = "psci"; + next-level-cache = <&l2_cache>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x100>; + enable-method = "psci"; + next-level-cache = <&l2_cache>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x200>; + enable-method = "psci"; + next-level-cache = <&l2_cache>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x300>; + enable-method = "psci"; + next-level-cache = <&l2_cache>; + }; + + l2_cache: l2-cache { + compatible = "cache"; + next-level-cache = <&l3_cache>; + }; + + l3_cache: l3-cache { + compatible = "cache"; + }; + }; + + psci { + method = "smc"; + compatible = "arm,psci-1.0", "arm,psci-0.2", "arm,psci"; + cpu_on = <0xc4000003>; + cpu_suspend = <0xc4000001>; + cpu_off = <0x84000002>; + }; + + axi: axi { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x00 0x00000000 0x00 0x00000000 0x10 0x00000000>, + <0x10 0x00000000 0x10 0x00000000 0x01 0x00000000>, + <0x14 0x00000000 0x14 0x00000000 0x04 0x00000000>, + <0x18 0x00000000 0x18 0x00000000 0x04 0x00000000>, + <0x1c 0x00000000 0x1c 0x00000000 0x04 0x00000000>; + + dma-ranges = <0x00 0x00000000 0x00 0x00000000 0x10 0x00000000>, + <0x10 0x00000000 0x10 0x00000000 0x01 0x00000000>, + <0x14 0x00000000 0x14 0x00000000 0x04 0x00000000>, + <0x18 0x00000000 0x18 0x00000000 0x04 0x00000000>, + <0x1c 0x00000000 0x1c 0x00000000 0x04 0x00000000>; + + vc4: gpu { + compatible = "brcm,bcm2712-vc6"; + }; + + iommu2: iommu@5100 { + /* IOMMU2 for PISP-BE, HEVC; and (unused) H264 accelerators */ + compatible = "brcm,bcm2712-iommu"; + reg = <0x10 0x5100 0x0 0x80>; + cache = <&iommuc>; + #iommu-cells = <0>; + }; + + iommu4: iommu@5200 { + /* IOMMU4 for HVS, MPL/TXP; and (unused) Unicam, PISP-FE, MiniBVN */ + compatible = "brcm,bcm2712-iommu"; + reg = <0x10 0x5200 0x0 0x80>; + cache = <&iommuc>; + #iommu-cells = <0>; + #interconnect-cells = <0>; + }; + + iommu5: iommu@5280 { + /* IOMMU5 for PCIe2 (RP1); and (unused) BSTM */ + compatible = "brcm,bcm2712-iommu"; + reg = <0x10 0x5280 0x0 0x80>; + cache = <&iommuc>; + #iommu-cells = <0>; + dma-iova-offset = <0x10 0x00000000>; // HACK for RP1 masters over PCIe + }; + + iommuc: iommuc@5b00 { + compatible = "brcm,bcm2712-iommuc"; + reg = <0x10 0x5b00 0x0 0x80>; + }; + + dma32: dma@10000 { + compatible = "brcm,bcm2712-dma"; + reg = <0x10 0x00010000 0 0x600>; + interrupts = , + , + , + , + , + ; + interrupt-names = "dma0", + "dma1", + "dma2", + "dma3", + "dma4", + "dma5"; + #dma-cells = <1>; + brcm,dma-channel-mask = <0x0035>; + }; + + dma40: dma@10600 { + compatible = "brcm,bcm2712-dma"; + reg = <0x10 0x00010600 0 0x600>; + interrupts = + , /* dma4 6 */ + , /* dma4 7 */ + , /* dma4 8 */ + , /* dma4 9 */ + , /* dma4 10 */ + ; /* dma4 11 */ + interrupt-names = "dma6", + "dma7", + "dma8", + "dma9", + "dma10", + "dma11"; + #dma-cells = <1>; + brcm,dma-channel-mask = <0x0fc0>; + }; + + // Single-lane Gen3 PCIe + // Outbound window at 0x14_000000-0x17_ffffff + pcie0: pcie@100000 { + compatible = "brcm,bcm2712-pcie"; + reg = <0x10 0x00100000 0x0 0x9310>; + device_type = "pci"; + max-link-speed = <2>; + #address-cells = <3>; + #interrupt-cells = <1>; + #size-cells = <2>; + /* + * Unused interrupts: + * 208: AER + * 215: NMI + * 216: PME + */ + interrupt-parent = <&gicv2>; + interrupts = , + ; + interrupt-names = "pcie", "msi"; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 209 + IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gicv2 GIC_SPI 210 + IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gicv2 GIC_SPI 211 + IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gicv2 GIC_SPI 212 + IRQ_TYPE_LEVEL_HIGH>; + resets = <&bcm_reset 5>, <&bcm_reset 42>, <&pcie_rescal>; + reset-names = "swinit", "bridge", "rescal"; + msi-controller; + msi-parent = <&pcie0>; + + ranges = <0x02000000 0x00 0x00000000 + 0x17 0x00000000 + 0x0 0xfffffffc>, + <0x43000000 0x04 0x00000000 + 0x14 0x00000000 + 0x3 0x00000000>; + + dma-ranges = <0x43000000 0x10 0x00000000 + 0x00 0x00000000 + 0x10 0x00000000>; + + status = "disabled"; + }; + + // Single-lane Gen3 PCIe + // Outbound window at 0x18_000000-0x1b_ffffff + pcie1: pcie@110000 { + compatible = "brcm,bcm2712-pcie"; + reg = <0x10 0x00110000 0x0 0x9310>; + device_type = "pci"; + max-link-speed = <2>; + #address-cells = <3>; + #interrupt-cells = <1>; + #size-cells = <2>; + /* + * Unused interrupts: + * 218: AER + * 225: NMI + * 226: PME + */ + interrupt-parent = <&gicv2>; + interrupts = , + ; + interrupt-names = "pcie", "msi"; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 219 + IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gicv2 GIC_SPI 220 + IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gicv2 GIC_SPI 221 + IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gicv2 GIC_SPI 222 + IRQ_TYPE_LEVEL_HIGH>; + resets = <&bcm_reset 7>, <&bcm_reset 43>, <&pcie_rescal>; + reset-names = "swinit", "bridge", "rescal"; + msi-controller; + msi-parent = <&mip1>; + + ranges = <0x02000000 0x00 0x00000000 + 0x1b 0x00000000 + 0x00 0xfffffffc>, + <0x43000000 0x04 0x00000000 + 0x18 0x00000000 + 0x03 0x00000000>; + + dma-ranges = <0x03000000 0x10 0x00000000 + 0x00 0x00000000 + 0x10 0x00000000>; + + brcm,enable-l1ss; + status = "disabled"; + }; + + pcie_rescal: reset-controller@119500 { + compatible = "brcm,bcm7216-pcie-sata-rescal"; + reg = <0x10 0x00119500 0x0 0x10>; + #reset-cells = <0>; + }; + + // Quad-lane Gen3 PCIe + // Outbound window at 0x1c_000000-0x1f_ffffff + pcie2: pcie@120000 { + compatible = "brcm,bcm2712-pcie"; + reg = <0x10 0x00120000 0x0 0x9310>; + device_type = "pci"; + max-link-speed = <2>; + #address-cells = <3>; + #interrupt-cells = <1>; + #size-cells = <2>; + /* + * Unused interrupts: + * 228: AER + * 235: NMI + * 236: PME + */ + interrupt-parent = <&gicv2>; + interrupts = , + ; + interrupt-names = "pcie", "msi"; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 229 + IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gicv2 GIC_SPI 230 + IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gicv2 GIC_SPI 231 + IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gicv2 GIC_SPI 232 + IRQ_TYPE_LEVEL_HIGH>; + resets = <&bcm_reset 32>, <&bcm_reset 44>, <&pcie_rescal>; + reset-names = "swinit", "bridge", "rescal"; + msi-controller; + msi-parent = <&mip0>; + + // ~4GB, 32-bit, not-prefetchable at PCIe 00_00000000 + ranges = <0x02000000 0x00 0x00000000 + 0x1f 0x00000000 + 0x0 0xfffffffc>, + // 12GB, 64-bit, prefetchable at PCIe 04_00000000 + <0x43000000 0x04 0x00000000 + 0x1c 0x00000000 + 0x03 0x00000000>; + + // 64GB system RAM space at PCIe 10_00000000 + dma-ranges = <0x02000000 0x00 0x00000000 + 0x1f 0x00000000 + 0x00 0x00400000>, + <0x43000000 0x10 0x00000000 + 0x00 0x00000000 + 0x10 0x00000000>; + + brcm,enable-l1ss; + status = "disabled"; + }; + + mip0: msi-controller@130000 { + compatible = "brcm,bcm2712-mip-intc"; + reg = <0x10 0x00130000 0x0 0xc0>; + msi-controller; + interrupt-controller; + #interrupt-cells = <2>; + brcm,msi-base-spi = <128>; + brcm,msi-num-spis = <64>; + brcm,msi-offset = <0>; + brcm,msi-pci-addr = <0xff 0xfffff000>; + }; + + mip1: msi-controller@131000 { + compatible = "brcm,bcm2712-mip-intc"; + reg = <0x10 0x00131000 0x0 0xc0>; + msi-controller; + interrupt-controller; + #interrupt-cells = <2>; + brcm,msi-base-spi = <247>; + /* Actually 20 total, but the others are + * both sparse and non-consecutive */ + brcm,msi-num-spis = <8>; + brcm,msi-offset = <8>; + brcm,msi-pci-addr = <0xff 0xffffe000>; + }; + + genet: ethernet@1300000 { + compatible = "brcm,bcm2711-genet-v5"; + reg = <0x10 0x01300000 0x0 0x20010>; + #address-cells = <0x1>; + #size-cells = <0x0>; + interrupts = , + ; + status = "disabled"; + phy-mode = "rgmii"; + fixed-link = <0x0 0x1 0x3e8 0x0 0x0>; + phy-speed = <0x3e8>; + phy-id = <0x101>; + phy-type = <0x6>; + local-mac-address = [ 00 10 18 d8 45 de ]; + device_type = "network"; + + genet_mdio: mdio@e14 { + compatible = "brcm,genet-mdio-v5"; + reg = <0xe14 0x8>; + #address-cells = <0x1>; + #size-cells = <0x0>; + }; + }; + + syscon_piarbctl: syscon@400018 { + compatible = "brcm,syscon-piarbctl", "syscon", "simple-mfd"; + reg = <0x10 0x00400018 0x0 0x18>; + }; + + rpivid: codec@800000 { + compatible = "raspberrypi,rpivid-vid-decoder"; + reg = <0x10 0x00800000 0x0 0x10000>, /* HEVC */ + <0x10 0x00840000 0x0 0x1000>; /* INTC */ + reg-names = "hevc", + "intc"; + + interrupts = ; + + clocks = <&firmware_clocks 11>; + clock-names = "hevc"; + status = "disabled"; + }; + + sdio1: mmc@fff000 { + compatible = "brcm,bcm2712-sdhci"; + reg = <0x10 0x00fff000 0x0 0x260>, + <0x10 0x00fff400 0x0 0x200>, + <0x10 0x015040b0 0x0 0x4>, // Bus isolation control + <0x10 0x015200f0 0x0 0x24>; // LCPLL control misc0-8 + reg-names = "host", "cfg", "busisol", "lcpll"; + interrupts = ; + clocks = <&clk_emmc2>; + sdhci-caps-mask = <0x0000C000 0x0>; + sdhci-caps = <0x0 0x0>; + supports-cqe; + mmc-ddr-3_3v; + }; + + sdio2: mmc@1100000 { + compatible = "brcm,bcm2712-sdhci"; + reg = <0x10 0x01100000 0x0 0x260>, + <0x10 0x01100400 0x0 0x200>; + reg-names = "host", "cfg"; + interrupts = ; + clocks = <&clk_emmc2>; + sdhci-caps-mask = <0x0000C000 0x0>; + sdhci-caps = <0x0 0x0>; + supports-cqe; + mmc-ddr-3_3v; + status = "disabled"; + }; + + sdio0: mmc@1108000 { + compatible = "brcm,bcm2711-emmc2"; + reg = <0x10 0x01108000 0x0 0x100>; + interrupts = ; + clocks = <&clk_emmc2>; + mmc-ddr-3_3v; + status = "disabled"; + }; + + bcm_reset: reset-controller@1504318 { + compatible = "brcm,brcmstb-reset"; + reg = <0x10 0x01504318 0x0 0x30>; + #reset-cells = <1>; + }; + + v3d: v3d@2000000 { + compatible = "brcm,2712-v3d"; + reg = <0x10 0x02000000 0x0 0x4000>, + <0x10 0x02008000 0x0 0x6000>; + reg-names = "hub", "core0"; + + power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>; + resets = <&pm BCM2835_RESET_V3D>; + clocks = <&firmware_clocks 5>; + clocks-names = "v3d"; + interrupts = , + ; + status = "disabled"; + }; + + gicv2: interrupt-controller@7fff9000 { + interrupt-controller; + #interrupt-cells = <3>; + compatible = "arm,gic-400"; + reg = <0x10 0x7fff9000 0x0 0x1000>, + <0x10 0x7fffa000 0x0 0x2000>, + <0x10 0x7fffc000 0x0 0x2000>, + <0x10 0x7fffe000 0x0 0x2000>; + interrupts = ; + }; + + pisp_be: pisp_be@880000 { + compatible = "raspberrypi,pispbe"; + reg = <0x10 0x00880000 0x0 0x4000>; + interrupts = ; + clocks = <&firmware_clocks 7>; + clocks-names = "isp_be"; + status = "okay"; + iommus = <&iommu2>; + }; + }; + + clocks { + /* The oscillator is the root of the clock tree. */ + clk_osc: clk-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "osc"; + clock-frequency = <54000000>; + }; + + clk_usb: clk-usb { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "otg"; + clock-frequency = <480000000>; + }; + + clk_vpu: clk_vpu { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <750000000>; + clock-output-names = "vpu-clock"; + }; + + clk_uart: clk_uart { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <9216000>; + clock-output-names = "uart-clock"; + }; + + clk_emmc2: clk_emmc2 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <54000000>; + clock-output-names = "emmc2-clock"; + }; + }; + + usbphy: phy { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; --- /dev/null +++ b/arch/arm/boot/dts/broadcom/rp1.dtsi @@ -0,0 +1,1168 @@ +#include +#include +#include + +&rp1_target { + rp1: rp1 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&rp1>; + + // ranges and dma-ranges must be provided by the includer + + rp1_clocks: clocks@18000 { + compatible = "raspberrypi,rp1-clocks"; + #clock-cells = <1>; + reg = <0xc0 0x40018000 0x0 0x10038>; + clocks = <&clk_xosc>; + + assigned-clocks = <&rp1_clocks RP1_PLL_SYS_CORE>, + <&rp1_clocks RP1_PLL_AUDIO_CORE>, + // RP1_PLL_VIDEO_CORE and dividers are now managed by VEC,DPI drivers + <&rp1_clocks RP1_PLL_SYS>, + <&rp1_clocks RP1_PLL_SYS_SEC>, + <&rp1_clocks RP1_PLL_AUDIO>, + <&rp1_clocks RP1_PLL_AUDIO_SEC>, + <&rp1_clocks RP1_CLK_SYS>, + <&rp1_clocks RP1_PLL_SYS_PRI_PH>, + // RP1_CLK_SLOW_SYS is used for the frequency counter (FC0) + <&rp1_clocks RP1_CLK_SLOW_SYS>, + <&rp1_clocks RP1_CLK_SDIO_TIMER>, + <&rp1_clocks RP1_CLK_SDIO_ALT_SRC>, + <&rp1_clocks RP1_CLK_ETH_TSU>; + + assigned-clock-rates = <1000000000>, // RP1_PLL_SYS_CORE + <1536000000>, // RP1_PLL_AUDIO_CORE + <200000000>, // RP1_PLL_SYS + <125000000>, // RP1_PLL_SYS_SEC + <61440000>, // RP1_PLL_AUDIO + <192000000>, // RP1_PLL_AUDIO_SEC + <200000000>, // RP1_CLK_SYS + <100000000>, // RP1_PLL_SYS_PRI_PH + // Must match the XOSC frequency + <50000000>, // RP1_CLK_SLOW_SYS + <1000000>, // RP1_CLK_SDIO_TIMER + <200000000>, // RP1_CLK_SDIO_ALT_SRC + <50000000>; // RP1_CLK_ETH_TSU + }; + + rp1_uart0: serial@30000 { + compatible = "arm,pl011-axi"; + reg = <0xc0 0x40030000 0x0 0x100>; + interrupts = ; + clocks = <&rp1_clocks RP1_CLK_UART &rp1_clocks RP1_PLL_SYS_PRI_PH>; + clock-names = "uartclk", "apb_pclk"; + dmas = <&rp1_dma RP1_DMA_UART0_TX>, + <&rp1_dma RP1_DMA_UART0_RX>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + arm,primecell-periphid = <0x00541011>; + uart-has-rtscts; + cts-event-workaround; + skip-init; + status = "disabled"; + }; + + rp1_uart1: serial@34000 { + compatible = "arm,pl011-axi"; + reg = <0xc0 0x40034000 0x0 0x100>; + interrupts = ; + clocks = <&rp1_clocks RP1_CLK_UART &rp1_clocks RP1_PLL_SYS_PRI_PH>; + clock-names = "uartclk", "apb_pclk"; + // dmas = <&rp1_dma RP1_DMA_UART1_TX>, + // <&rp1_dma RP1_DMA_UART1_RX>; + // dma-names = "tx", "rx"; + pinctrl-names = "default"; + arm,primecell-periphid = <0x00541011>; + uart-has-rtscts; + cts-event-workaround; + skip-init; + status = "disabled"; + }; + + rp1_uart2: serial@38000 { + compatible = "arm,pl011-axi"; + reg = <0xc0 0x40038000 0x0 0x100>; + interrupts = ; + clocks = <&rp1_clocks RP1_CLK_UART &rp1_clocks RP1_PLL_SYS_PRI_PH>; + clock-names = "uartclk", "apb_pclk"; + // dmas = <&rp1_dma RP1_DMA_UART2_TX>, + // <&rp1_dma RP1_DMA_UART2_RX>; + // dma-names = "tx", "rx"; + pinctrl-names = "default"; + arm,primecell-periphid = <0x00541011>; + uart-has-rtscts; + cts-event-workaround; + skip-init; + status = "disabled"; + }; + + rp1_uart3: serial@3c000 { + compatible = "arm,pl011-axi"; + reg = <0xc0 0x4003c000 0x0 0x100>; + interrupts = ; + clocks = <&rp1_clocks RP1_CLK_UART &rp1_clocks RP1_PLL_SYS_PRI_PH>; + clock-names = "uartclk", "apb_pclk"; + // dmas = <&rp1_dma RP1_DMA_UART3_TX>, + // <&rp1_dma RP1_DMA_UART3_RX>; + // dma-names = "tx", "rx"; + pinctrl-names = "default"; + arm,primecell-periphid = <0x00541011>; + uart-has-rtscts; + cts-event-workaround; + skip-init; + status = "disabled"; + }; + + rp1_uart4: serial@40000 { + compatible = "arm,pl011-axi"; + reg = <0xc0 0x40040000 0x0 0x100>; + interrupts = ; + clocks = <&rp1_clocks RP1_CLK_UART &rp1_clocks RP1_PLL_SYS_PRI_PH>; + clock-names = "uartclk", "apb_pclk"; + // dmas = <&rp1_dma RP1_DMA_UART4_TX>, + // <&rp1_dma RP1_DMA_UART4_RX>; + // dma-names = "tx", "rx"; + pinctrl-names = "default"; + arm,primecell-periphid = <0x00541011>; + uart-has-rtscts; + cts-event-workaround; + skip-init; + status = "disabled"; + }; + + rp1_uart5: serial@44000 { + compatible = "arm,pl011-axi"; + reg = <0xc0 0x40044000 0x0 0x100>; + interrupts = ; + clocks = <&rp1_clocks RP1_CLK_UART &rp1_clocks RP1_PLL_SYS_PRI_PH>; + clock-names = "uartclk", "apb_pclk"; + // dmas = <&rp1_dma RP1_DMA_UART5_TX>, + // <&rp1_dma RP1_DMA_UART5_RX>; + // dma-names = "tx", "rx"; + pinctrl-names = "default"; + arm,primecell-periphid = <0x00541011>; + uart-has-rtscts; + cts-event-workaround; + skip-init; + status = "disabled"; + }; + + rp1_spi8: spi@4c000 { + reg = <0xc0 0x4004c000 0x0 0x130>; + compatible = "snps,dw-apb-ssi"; + interrupts = ; + clocks = <&rp1_clocks RP1_CLK_SYS>; + clock-names = "ssi_clk"; + #address-cells = <1>; + #size-cells = <0>; + num-cs = <2>; + dmas = <&rp1_dma RP1_DMA_SPI8_TX>, + <&rp1_dma RP1_DMA_SPI8_RX>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + rp1_spi0: spi@50000 { + reg = <0xc0 0x40050000 0x0 0x130>; + compatible = "snps,dw-apb-ssi"; + interrupts = ; + clocks = <&rp1_clocks RP1_CLK_SYS>; + clock-names = "ssi_clk"; + #address-cells = <1>; + #size-cells = <0>; + num-cs = <2>; + dmas = <&rp1_dma RP1_DMA_SPI0_TX>, + <&rp1_dma RP1_DMA_SPI0_RX>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + rp1_spi1: spi@54000 { + reg = <0xc0 0x40054000 0x0 0x130>; + compatible = "snps,dw-apb-ssi"; + interrupts = ; + clocks = <&rp1_clocks RP1_CLK_SYS>; + clock-names = "ssi_clk"; + #address-cells = <0>; + #size-cells = <0>; + num-cs = <2>; + dmas = <&rp1_dma RP1_DMA_SPI1_TX>, + <&rp1_dma RP1_DMA_SPI1_RX>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + rp1_spi2: spi@58000 { + reg = <0xc0 0x40058000 0x0 0x130>; + compatible = "snps,dw-apb-ssi"; + interrupts = ; + clocks = <&rp1_clocks RP1_CLK_SYS>; + clock-names = "ssi_clk"; + #address-cells = <1>; + #size-cells = <0>; + num-cs = <2>; + dmas = <&rp1_dma RP1_DMA_SPI2_TX>, + <&rp1_dma RP1_DMA_SPI2_RX>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + rp1_spi3: spi@5c000 { + reg = <0xc0 0x4005c000 0x0 0x130>; + compatible = "snps,dw-apb-ssi"; + interrupts = ; + clocks = <&rp1_clocks RP1_CLK_SYS>; + clock-names = "ssi_clk"; + #address-cells = <1>; + #size-cells = <0>; + num-cs = <2>; + dmas = <&rp1_dma RP1_DMA_SPI3_TX>, + <&rp1_dma RP1_DMA_SPI3_RX>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + // SPI4 is a target/slave interface + rp1_spi4: spi@60000 { + reg = <0xc0 0x40060000 0x0 0x130>; + compatible = "snps,dw-apb-ssi"; + interrupts = ; + clocks = <&rp1_clocks RP1_CLK_SYS>; + clock-names = "ssi_clk"; + #address-cells = <0>; + #size-cells = <0>; + num-cs = <1>; + spi-slave; + dmas = <&rp1_dma RP1_DMA_SPI4_TX>, + <&rp1_dma RP1_DMA_SPI4_RX>; + dma-names = "tx", "rx"; + status = "disabled"; + + slave { + compatible = "spidev"; + spi-max-frequency = <1000000>; + }; + }; + + rp1_spi5: spi@64000 { + reg = <0xc0 0x40064000 0x0 0x130>; + compatible = "snps,dw-apb-ssi"; + interrupts = ; + clocks = <&rp1_clocks RP1_CLK_SYS>; + clock-names = "ssi_clk"; + #address-cells = <1>; + #size-cells = <0>; + num-cs = <2>; + dmas = <&rp1_dma RP1_DMA_SPI5_TX>, + <&rp1_dma RP1_DMA_SPI5_RX>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + // SPI7 is a target/slave interface + rp1_spi7: spi@6c000 { + reg = <0xc0 0x4006c000 0x0 0x130>; + compatible = "snps,dw-apb-ssi"; + interrupts = ; + clocks = <&rp1_clocks RP1_CLK_SYS>; + clock-names = "ssi_clk"; + #address-cells = <0>; + #size-cells = <0>; + num-cs = <1>; + spi-slave; + dmas = <&rp1_dma RP1_DMA_SPI7_TX>, + <&rp1_dma RP1_DMA_SPI7_RX>; + dma-names = "tx", "rx"; + status = "disabled"; + + slave { + compatible = "spidev"; + spi-max-frequency = <1000000>; + }; + }; + + rp1_i2c0: i2c@70000 { + reg = <0xc0 0x40070000 0x0 0x1000>; + compatible = "snps,designware-i2c"; + interrupts = ; + clocks = <&rp1_clocks RP1_CLK_SYS>; + status = "disabled"; + }; + + rp1_i2c1: i2c@74000 { + reg = <0xc0 0x40074000 0x0 0x1000>; + compatible = "snps,designware-i2c"; + interrupts = ; + clocks = <&rp1_clocks RP1_CLK_SYS>; + status = "disabled"; + }; + + rp1_i2c2: i2c@78000 { + reg = <0xc0 0x40078000 0x0 0x1000>; + compatible = "snps,designware-i2c"; + interrupts = ; + clocks = <&rp1_clocks RP1_CLK_SYS>; + status = "disabled"; + }; + + rp1_i2c3: i2c@7c000 { + reg = <0xc0 0x4007c000 0x0 0x1000>; + compatible = "snps,designware-i2c"; + interrupts = ; + clocks = <&rp1_clocks RP1_CLK_SYS>; + status = "disabled"; + }; + + rp1_i2c4: i2c@80000 { + reg = <0xc0 0x40080000 0x0 0x1000>; + compatible = "snps,designware-i2c"; + interrupts = ; + clocks = <&rp1_clocks RP1_CLK_SYS>; + status = "disabled"; + }; + + rp1_i2c5: i2c@84000 { + reg = <0xc0 0x40084000 0x0 0x1000>; + compatible = "snps,designware-i2c"; + interrupts = ; + clocks = <&rp1_clocks RP1_CLK_SYS>; + status = "disabled"; + }; + + rp1_i2c6: i2c@88000 { + reg = <0xc0 0x40088000 0x0 0x1000>; + compatible = "snps,designware-i2c"; + interrupts = ; + clocks = <&rp1_clocks RP1_CLK_SYS>; + status = "disabled"; + }; + + rp1_pwm0: pwm@98000 { + compatible = "raspberrypi,rp1-pwm"; + reg = <0xc0 0x40098000 0x0 0x100>; + #pwm-cells = <3>; + clocks = <&rp1_clocks RP1_CLK_PWM0>; + assigned-clocks = <&rp1_clocks RP1_CLK_PWM0>; + assigned-clock-rates = <6144000>; + status = "disabled"; + }; + + rp1_pwm1: pwm@9c000 { + compatible = "raspberrypi,rp1-pwm"; + reg = <0xc0 0x4009c000 0x0 0x100>; + #pwm-cells = <3>; + clocks = <&rp1_clocks RP1_CLK_PWM1>; + assigned-clocks = <&rp1_clocks RP1_CLK_PWM1>; + assigned-clock-rates = <6144000>; + status = "disabled"; + }; + + rp1_i2s0: i2s@a0000 { + reg = <0xc0 0x400a0000 0x0 0x1000>; + compatible = "snps,designware-i2s"; + // Providing an interrupt disables DMA + // interrupts = ; + clocks = <&rp1_clocks RP1_CLK_I2S>; + clock-names = "i2sclk"; + #sound-dai-cells = <0>; + dmas = <&rp1_dma RP1_DMA_I2S0_TX>,<&rp1_dma RP1_DMA_I2S0_RX>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + rp1_i2s1: i2s@a4000 { + reg = <0xc0 0x400a4000 0x0 0x1000>; + compatible = "snps,designware-i2s"; + // Providing an interrupt disables DMA + // interrupts = ; + clocks = <&rp1_clocks RP1_CLK_I2S>; + clock-names = "i2sclk"; + #sound-dai-cells = <0>; + dmas = <&rp1_dma RP1_DMA_I2S1_TX>,<&rp1_dma RP1_DMA_I2S1_RX>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + rp1_i2s2: i2s@a8000 { + reg = <0xc0 0x400a8000 0x0 0x1000>; + compatible = "snps,designware-i2s"; + // Providing an interrupt disables DMA + // interrupts = ; + clocks = <&rp1_clocks RP1_CLK_I2S>; + status = "disabled"; + }; + + rp1_sdio_clk0: sdio_clk0@b0004 { + compatible = "raspberrypi,rp1-sdio-clk"; + reg = <0xc0 0x400b0004 0x0 0x1c>; + clocks = <&sdio_src &sdhci_core>; + clock-names = "src", "base"; + #clock-cells = <0>; + status = "disabled"; + }; + + rp1_sdio_clk1: sdio_clk1@b4004 { + compatible = "raspberrypi,rp1-sdio-clk"; + reg = <0xc0 0x400b4004 0x0 0x1c>; + clocks = <&sdio_src &sdhci_core>; + clock-names = "src", "base"; + #clock-cells = <0>; + status = "disabled"; + }; + + rp1_adc: adc@c8000 { + compatible = "raspberrypi,rp1-adc"; + reg = <0xc0 0x400c8000 0x0 0x4000>; + clocks = <&rp1_clocks RP1_CLK_ADC>; + clock-names = "adcclk"; + #clock-cells = <0>; + vref-supply = <&rp1_vdd_3v3>; + status = "disabled"; + }; + + rp1_gpio: gpio@d0000 { + reg = <0xc0 0x400d0000 0x0 0xc000>, + <0xc0 0x400e0000 0x0 0xc000>, + <0xc0 0x400f0000 0x0 0xc000>; + compatible = "raspberrypi,rp1-gpio"; + interrupts = , + , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + rp1_uart0_14_15: rp1_uart0_14_15 { + pin_txd { + function = "uart0"; + pins = "gpio14"; + bias-disable; + }; + pin_rxd { + function = "uart0"; + pins = "gpio15"; + bias-pull-up; + }; + }; + rp1_uart0_ctsrts_16_17: rp1_uart0_ctsrts_16_17 { + pin_cts { + function = "uart0"; + pins = "gpio16"; + bias-pull-up; + }; + pin_rts { + function = "uart0"; + pins = "gpio17"; + bias-disable; + }; + }; + rp1_uart1_0_1: rp1_uart1_0_1 { + pin_txd { + function = "uart1"; + pins = "gpio0"; + bias-disable; + }; + pin_rxd { + function = "uart1"; + pins = "gpio1"; + bias-pull-up; + }; + }; + rp1_uart1_ctsrts_2_3: rp1_uart1_ctsrts_2_3 { + pin_cts { + function = "uart1"; + pins = "gpio2"; + bias-pull-up; + }; + pin_rts { + function = "uart1"; + pins = "gpio3"; + bias-disable; + }; + }; + rp1_uart2_4_5: rp1_uart2_4_5 { + pin_txd { + function = "uart2"; + pins = "gpio4"; + bias-disable; + }; + pin_rxd { + function = "uart2"; + pins = "gpio5"; + bias-pull-up; + }; + }; + rp1_uart2_ctsrts_6_7: rp1_uart2_ctsrts_6_7 { + pin_cts { + function = "uart2"; + pins = "gpio6"; + bias-pull-up; + }; + pin_rts { + function = "uart2"; + pins = "gpio7"; + bias-disable; + }; + }; + rp1_uart3_8_9: rp1_uart3_8_9 { + pin_txd { + function = "uart3"; + pins = "gpio8"; + bias-disable; + }; + pin_rxd { + function = "uart3"; + pins = "gpio9"; + bias-pull-up; + }; + }; + rp1_uart3_ctsrts_10_11: rp1_uart3_ctsrts_10_11 { + pin_cts { + function = "uart3"; + pins = "gpio10"; + bias-pull-up; + }; + pin_rts { + function = "uart3"; + pins = "gpio11"; + bias-disable; + }; + }; + rp1_uart4_12_13: rp1_uart4_12_13 { + pin_txd { + function = "uart4"; + pins = "gpio12"; + bias-disable; + }; + pin_rxd { + function = "uart4"; + pins = "gpio13"; + bias-pull-up; + }; + }; + rp1_uart4_ctsrts_14_15: rp1_uart4_ctsrts_14_15 { + pin_cts { + function = "uart4"; + pins = "gpio14"; + bias-pull-up; + }; + pin_rts { + function = "uart4"; + pins = "gpio15"; + bias-disable; + }; + }; + + rp1_sdio0_22_27: rp1_sdio0_22_27 { + pin_clk { + function = "sd0"; + pins = "gpio22"; + bias-disable; + drive-strength = <12>; + slew-rate = <1>; + }; + pin_cmd { + function = "sd0"; + pins = "gpio23"; + bias-pull-up; + drive-strength = <12>; + slew-rate = <1>; + }; + pins_dat { + function = "sd0"; + pins = "gpio24", "gpio25", "gpio26", "gpio27"; + bias-pull-up; + drive-strength = <12>; + slew-rate = <1>; + }; + }; + + rp1_sdio1_28_33: rp1_sdio1_28_33 { + pin_clk { + function = "sd1"; + pins = "gpio28"; + bias-disable; + drive-strength = <12>; + slew-rate = <1>; + }; + pin_cmd { + function = "sd1"; + pins = "gpio29"; + bias-pull-up; + drive-strength = <12>; + slew-rate = <1>; + }; + pins_dat { + function = "sd1"; + pins = "gpio30", "gpio31", "gpio32", "gpio33"; + bias-pull-up; + drive-strength = <12>; + slew-rate = <1>; + }; + }; + + rp1_i2s0_18_21: rp1_i2s0_18_21 { + function = "i2s0"; + pins = "gpio18", "gpio19", "gpio20", "gpio21"; + bias-disable; + }; + + rp1_i2s1_18_21: rp1_i2s1_18_21 { + function = "i2s1"; + pins = "gpio18", "gpio19", "gpio20", "gpio21"; + bias-disable; + }; + + rp1_i2c4_34_35: rp1_i2c4_34_35 { + function = "i2c4"; + pins = "gpio34", "gpio35"; + bias-pull-up; + }; + rp1_i2c6_38_39: rp1_i2c6_38_39 { + function = "i2c6"; + pins = "gpio38", "gpio39"; + bias-pull-up; + }; + rp1_i2c4_40_41: rp1_i2c4_40_41 { + function = "i2c4"; + pins = "gpio40", "gpio41"; + bias-pull-up; + }; + rp1_i2c5_44_45: rp1_i2c5_44_45 { + function = "i2c5"; + pins = "gpio44", "gpio45"; + bias-pull-up; + }; + rp1_i2c0_0_1: rp1_i2c0_0_1 { + function = "i2c0"; + pins = "gpio0", "gpio1"; + bias-pull-up; + }; + rp1_i2c0_8_9: rp1_i2c0_8_9 { + function = "i2c0"; + pins = "gpio8", "gpio9"; + bias-pull-up; + }; + rp1_i2c1_2_3: rp1_i2c1_2_3 { + function = "i2c1"; + pins = "gpio2", "gpio3"; + bias-pull-up; + }; + rp1_i2c1_10_11: rp1_i2c1_10_11 { + function = "i2c1"; + pins = "gpio10", "gpio11"; + bias-pull-up; + }; + rp1_i2c2_4_5: rp1_i2c2_4_5 { + function = "i2c2"; + pins = "gpio4", "gpio5"; + bias-pull-up; + }; + rp1_i2c2_12_13: rp1_i2c2_12_13 { + function = "i2c2"; + pins = "gpio12", "gpio13"; + bias-pull-up; + }; + rp1_i2c3_6_7: rp1_i2c3_6_7 { + function = "i2c3"; + pins = "gpio6", "gpio7"; + bias-pull-up; + }; + rp1_i2c3_14_15: rp1_i2c3_14_15 { + function = "i2c3"; + pins = "gpio14", "gpio15"; + bias-pull-up; + }; + rp1_i2c3_22_23: rp1_i2c3_22_23 { + function = "i2c3"; + pins = "gpio22", "gpio23"; + bias-pull-up; + }; + + // DPI mappings with HSYNC,VSYNC but without PIXCLK,DE + rp1_dpi_16bit_gpio2: rp1_dpi_16bit_gpio2 { /* Mode 2, not fully supported by RP1 */ + function = "dpi"; + pins = "gpio2", "gpio3", "gpio4", "gpio5", + "gpio6", "gpio7", "gpio8", "gpio9", + "gpio10", "gpio11", "gpio12", "gpio13", + "gpio14", "gpio15", "gpio16", "gpio17", + "gpio18", "gpio19"; + bias-disable; + }; + rp1_dpi_16bit_cpadhi_gpio2: rp1_dpi_16bit_cpadhi_gpio2 { /* Mode 3 */ + function = "dpi"; + pins = "gpio2", "gpio3", "gpio4", "gpio5", + "gpio6", "gpio7", "gpio8", + "gpio12", "gpio13", "gpio14", "gpio15", + "gpio16", "gpio17", + "gpio20", "gpio21", "gpio22", "gpio23", + "gpio24"; + bias-disable; + }; + rp1_dpi_16bit_pad666_gpio2: rp1_dpi_16bit_pad666_gpio2 { /* Mode 4 */ + function = "dpi"; + pins = "gpio2", "gpio3", + "gpio5", "gpio6", "gpio7", "gpio8", + "gpio9", + "gpio12", "gpio13", "gpio14", "gpio15", + "gpio16", "gpio17", + "gpio21", "gpio22", "gpio23", "gpio24", + "gpio25"; + bias-disable; + }; + rp1_dpi_18bit_gpio2: rp1_dpi_18bit_gpio2 { /* Mode 5, not fully supported by RP1 */ + function = "dpi"; + pins = "gpio2", "gpio3", "gpio4", "gpio5", + "gpio6", "gpio7", "gpio8", "gpio9", + "gpio10", "gpio11", "gpio12", "gpio13", + "gpio14", "gpio15", "gpio16", "gpio17", + "gpio18", "gpio19", "gpio20", "gpio21"; + bias-disable; + }; + rp1_dpi_18bit_cpadhi_gpio2: rp1_dpi_18bit_cpadhi_gpio2 { /* Mode 6 */ + function = "dpi"; + pins = "gpio2", "gpio3", "gpio4", "gpio5", + "gpio6", "gpio7", "gpio8", "gpio9", + "gpio12", "gpio13", "gpio14", "gpio15", + "gpio16", "gpio17", + "gpio20", "gpio21", "gpio22", "gpio23", + "gpio24", "gpio25"; + bias-disable; + }; + rp1_dpi_24bit_gpio2: rp1_dpi_24bit_gpio2 { /* Mode 7 */ + function = "dpi"; + pins = "gpio2", "gpio3", "gpio4", "gpio5", + "gpio6", "gpio7", "gpio8", "gpio9", + "gpio10", "gpio11", "gpio12", "gpio13", + "gpio14", "gpio15", "gpio16", "gpio17", + "gpio18", "gpio19", "gpio20", "gpio21", + "gpio22", "gpio23", "gpio24", "gpio25", + "gpio26", "gpio27"; + bias-disable; + }; + rp1_dpi_hvsync: rp1_dpi_hvsync { /* Sync only, for use with int VDAC */ + function = "dpi"; + pins = "gpio2", "gpio3"; + bias-disable; + }; + + // More DPI mappings, including PIXCLK,DE on GPIOs 0,1 + rp1_dpi_16bit_gpio0: rp1_dpi_16bit_gpio0 { /* Mode 2, not fully supported by RP1 */ + function = "dpi"; + pins = "gpio0", "gpio1", "gpio2", "gpio3", + "gpio4", "gpio5", "gpio6", "gpio7", + "gpio8", "gpio9", "gpio10", "gpio11", + "gpio12", "gpio13", "gpio14", "gpio15", + "gpio16", "gpio17", "gpio18", "gpio19"; + bias-disable; + }; + rp1_dpi_16bit_cpadhi_gpio0: rp1_dpi_16bit_cpadhi_gpio0 { /* Mode 3 */ + function = "dpi"; + pins = "gpio0", "gpio1", "gpio2", "gpio3", + "gpio4", "gpio5", "gpio6", "gpio7", + "gpio8", + "gpio12", "gpio13", "gpio14", "gpio15", + "gpio16", "gpio17", + "gpio20", "gpio21", "gpio22", "gpio23", + "gpio24"; + bias-disable; + }; + rp1_dpi_16bit_pad666_gpio0: rp1_dpi_16bit_pad666_gpio0 { /* Mode 4 */ + function = "dpi"; + pins = "gpio0", "gpio1", "gpio2", "gpio3", + "gpio5", "gpio6", "gpio7", "gpio8", + "gpio9", + "gpio12", "gpio13", "gpio14", "gpio15", + "gpio16", "gpio17", + "gpio21", "gpio22", "gpio23", "gpio24", + "gpio25"; + bias-disable; + }; + rp1_dpi_18bit_gpio0: rp1_dpi_18bit_gpio0 { /* Mode 5, not fully supported by RP1 */ + function = "dpi"; + pins = "gpio0", "gpio1", "gpio2", "gpio3", + "gpio4", "gpio5", "gpio6", "gpio7", + "gpio8", "gpio9", "gpio10", "gpio11", + "gpio12", "gpio13", "gpio14", "gpio15", + "gpio16", "gpio17", "gpio18", "gpio19", + "gpio20", "gpio21"; + bias-disable; + }; + rp1_dpi_18bit_cpadhi_gpio0: rp1_dpi_18bit_cpadhi_gpio0 { /* Mode 6 */ + function = "dpi"; + pins = "gpio0", "gpio1", "gpio2", "gpio3", + "gpio4", "gpio5", "gpio6", "gpio7", + "gpio8", "gpio9", + "gpio12", "gpio13", "gpio14", "gpio15", + "gpio16", "gpio17", + "gpio20", "gpio21", "gpio22", "gpio23", + "gpio24", "gpio25"; + bias-disable; + }; + rp1_dpi_24bit_gpio0: rp1_dpi_24bit_gpio0 { /* Mode 7 -- All GPIOs used! */ + function = "dpi"; + pins = "gpio0", "gpio1", "gpio2", "gpio3", + "gpio4", "gpio5", "gpio6", "gpio7", + "gpio8", "gpio9", "gpio10", "gpio11", + "gpio12", "gpio13", "gpio14", "gpio15", + "gpio16", "gpio17", "gpio18", "gpio19", + "gpio20", "gpio21", "gpio22", "gpio23", + "gpio24", "gpio25", "gpio26", "gpio27"; + bias-disable; + }; + + rp1_pwm1_gpio45: rp1_pwm1_gpio45 { + function = "pwm1"; + pins = "gpio45"; + bias-pull-down; + }; + + rp1_spi0_gpio9: rp1_spi0_gpio9 { + function = "spi0"; + pins = "gpio9", "gpio10", "gpio11"; + bias-disable; + drive-strength = <12>; + slew-rate = <1>; + }; + + rp1_spi0_cs_gpio7: rp1_spi0_cs_gpio7 { + function = "spi0"; + pins = "gpio7", "gpio8"; + bias-pull-up; + }; + + rp1_spi1_gpio19: rp1_spi1_gpio19 { + function = "spi1"; + pins = "gpio19", "gpio20", "gpio21"; + bias-disable; + drive-strength = <12>; + slew-rate = <1>; + }; + + rp1_spi2_gpio1: rp1_spi2_gpio1 { + function = "spi2"; + pins = "gpio1", "gpio2", "gpio3"; + bias-disable; + drive-strength = <12>; + slew-rate = <1>; + }; + + rp1_spi3_gpio5: rp1_spi3_gpio5 { + function = "spi3"; + pins = "gpio5", "gpio6", "gpio7"; + bias-disable; + drive-strength = <12>; + slew-rate = <1>; + }; + + rp1_spi4_gpio9: rp1_spi4_gpio9 { + function = "spi4"; + pins = "gpio9", "gpio10", "gpio11"; + bias-disable; + drive-strength = <12>; + slew-rate = <1>; + }; + + rp1_spi5_gpio13: rp1_spi5_gpio13 { + function = "spi5"; + pins = "gpio13", "gpio14", "gpio15"; + bias-disable; + drive-strength = <12>; + slew-rate = <1>; + }; + + rp1_spi8_gpio49: rp1_spi8_gpio49 { + function = "spi8"; + pins = "gpio49", "gpio50", "gpio51"; + bias-disable; + drive-strength = <12>; + slew-rate = <1>; + }; + + rp1_spi8_cs_gpio52: rp1_spi8_cs_gpio52 { + function = "spi0"; + pins = "gpio52", "gpio53"; + bias-pull-up; + }; + }; + + rp1_eth: ethernet@100000 { + reg = <0xc0 0x40100000 0x0 0x4000>; + compatible = "cdns,macb"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clocks = <&macb_pclk &macb_hclk &rp1_clocks RP1_CLK_ETH_TSU>; + clock-names = "pclk", "hclk", "tsu_clk"; + phy-mode = "rgmii-id"; + cdns,aw2w-max-pipe = /bits/ 8 <8>; + cdns,ar2r-max-pipe = /bits/ 8 <8>; + cdns,use-aw2b-fill; + local-mac-address = [00 00 00 00 00 00]; + status = "disabled"; + }; + + rp1_csi0: csi@110000 { + compatible = "raspberrypi,rp1-cfe"; + reg = <0xc0 0x40110000 0x0 0x100>, // CSI2 DMA address + <0xc0 0x40114000 0x0 0x100>, // PHY/CSI Host address + <0xc0 0x40120000 0x0 0x100>, // MIPI CFG address + <0xc0 0x40124000 0x0 0x1000>; // PiSP FE address + + // interrupts must match rp1_pisp_fe setup + interrupts = ; + + clocks = <&rp1_clocks RP1_CLK_MIPI0_CFG>; + assigned-clocks = <&rp1_clocks RP1_CLK_MIPI0_CFG>; + assigned-clock-rates = <25000000>; + + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + rp1_csi1: csi@128000 { + compatible = "raspberrypi,rp1-cfe"; + reg = <0xc0 0x40128000 0x0 0x100>, // CSI2 DMA address + <0xc0 0x4012c000 0x0 0x100>, // PHY/CSI Host address + <0xc0 0x40138000 0x0 0x100>, // MIPI CFG address + <0xc0 0x4013c000 0x0 0x1000>; // PiSP FE address + + // interrupts must match rp1_pisp_fe setup + interrupts = ; + + clocks = <&rp1_clocks RP1_CLK_MIPI1_CFG>; + assigned-clocks = <&rp1_clocks RP1_CLK_MIPI1_CFG>; + assigned-clock-rates = <25000000>; + + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + rp1_mmc0: mmc@180000 { + reg = <0xc0 0x40180000 0x0 0x100>; + compatible = "snps,dwcmshc-sdhci"; + interrupts = ; + clocks = <&rp1_clocks RP1_CLK_SYS &sdhci_core + &rp1_clocks RP1_CLK_SDIO_TIMER + &rp1_sdio_clk0>; + clock-names = "bus", "core", "timeout", "sdio"; + /* Bank 0 VDDIO is fixed */ + no-1-8-v; + bus-width = <4>; + vmmc-supply = <&rp1_vdd_3v3>; + broken-cd; + status = "disabled"; + }; + + rp1_mmc1: mmc@184000 { + reg = <0xc0 0x40184000 0x0 0x100>; + compatible = "snps,dwcmshc-sdhci"; + interrupts = ; + clocks = <&rp1_clocks RP1_CLK_SYS &sdhci_core + &rp1_clocks RP1_CLK_SDIO_TIMER + &rp1_sdio_clk1>; + clock-names = "bus", "core", "timeout", "sdio"; + bus-width = <4>; + vmmc-supply = <&rp1_vdd_3v3>; + /* Nerf SDR speeds */ + sdhci-caps-mask = <0x3 0x0>; + broken-cd; + status = "disabled"; + }; + + rp1_dma: dma@188000 { + reg = <0xc0 0x40188000 0x0 0x1000>; + compatible = "snps,axi-dma-1.01a"; + interrupts = ; + clocks = <&sdhci_core &rp1_clocks RP1_CLK_SYS>; + clock-names = "core-clk", "cfgr-clk"; + + #dma-cells = <1>; + dma-channels = <8>; + snps,dma-masters = <1>; + snps,dma-targets = <64>; + snps,data-width = <4>; // (8 << 4) == 128 bits + snps,block-size = <0x40000 0x40000 0x40000 0x40000 0x40000 0x40000 0x40000 0x40000>; + snps,priority = <0 1 2 3 4 5 6 7>; + snps,axi-max-burst-len = <8>; + status = "disabled"; + }; + + rp1_usb0: usb@200000 { + reg = <0xc0 0x40200000 0x0 0x100000>; + compatible = "snps,dwc3"; + dr_mode = "host"; + usb3-lpm-capable; + snps,axi-pipe-limit = /bits/ 8 <8>; + snps,dis_rxdet_inp3_quirk; + snps,tx-max-burst-prd = <8>; + snps,tx-thr-num-pkt-prd = <2>; + interrupts = ; + status = "disabled"; + }; + + rp1_usb1: usb@300000 { + reg = <0xc0 0x40300000 0x0 0x100000>; + compatible = "snps,dwc3"; + dr_mode = "host"; + usb3-lpm-capable; + snps,axi-pipe-limit = /bits/ 8 <8>; + snps,dis_rxdet_inp3_quirk; + snps,tx-max-burst-prd = <8>; + snps,tx-thr-num-pkt-prd = <2>; + interrupts = ; + status = "disabled"; + }; + + rp1_dsi0: dsi@110000 { + compatible = "raspberrypi,rp1dsi"; + status = "disabled"; + reg = <0xc0 0x40118000 0x0 0x1000>, // MIPI0 DSI DMA (ArgonDPI) + <0xc0 0x4011c000 0x0 0x1000>, // MIPI0 DSI Host (SNPS) + <0xc0 0x40120000 0x0 0x1000>; // MIPI0 CFG + + interrupts = ; + + clocks = <&rp1_clocks RP1_CLK_MIPI0_CFG>, // required, config bus clock + <&rp1_clocks RP1_CLK_MIPI0_DPI>, // required, pixel clock + <&clksrc_mipi0_dsi_byteclk>, // internal, parent for divide + <&clk_xosc>; // hardwired to DSI "refclk" + clock-names = "cfgclk", "dpiclk", "byteclk", "refclk"; + + assigned-clocks = <&rp1_clocks RP1_CLK_MIPI0_CFG>, + <&rp1_clocks RP1_CLK_MIPI0_DPI>; + assigned-clock-rates = <25000000>; + assigned-clock-parents = <0>, <&clksrc_mipi0_dsi_byteclk>; + }; + + rp1_dsi1: dsi@128000 { + compatible = "raspberrypi,rp1dsi"; + status = "disabled"; + reg = <0xc0 0x40130000 0x0 0x1000>, // MIPI1 DSI DMA (ArgonDPI) + <0xc0 0x40134000 0x0 0x1000>, // MIPI1 DSI Host (SNPS) + <0xc0 0x40138000 0x0 0x1000>; // MIPI1 CFG + + interrupts = ; + + clocks = <&rp1_clocks RP1_CLK_MIPI1_CFG>, // required, config bus clock + <&rp1_clocks RP1_CLK_MIPI1_DPI>, // required, pixel clock + <&clksrc_mipi1_dsi_byteclk>, // internal, parent for divide + <&clk_xosc>; // hardwired to DSI "refclk" + clock-names = "cfgclk", "dpiclk", "byteclk", "refclk"; + + assigned-clocks = <&rp1_clocks RP1_CLK_MIPI1_CFG>, + <&rp1_clocks RP1_CLK_MIPI1_DPI>; + assigned-clock-rates = <25000000>; + assigned-clock-parents = <0>, <&clksrc_mipi1_dsi_byteclk>; + }; + + /* VEC and DPI both need to control PLL_VIDEO and cannot work together; */ + /* config.txt should enable one or other using dtparam=vec or an overlay. */ + rp1_vec: vec@144000 { + compatible = "raspberrypi,rp1vec"; + status = "disabled"; + reg = <0xc0 0x40144000 0x0 0x1000>, // VIDEO_OUT_VEC + <0xc0 0x40140000 0x0 0x1000>; // VIDEO_OUT_CFG + + interrupts = ; + + clocks = <&rp1_clocks RP1_CLK_VEC>; + + assigned-clocks = <&rp1_clocks RP1_PLL_VIDEO_CORE>, + <&rp1_clocks RP1_PLL_VIDEO_SEC>, + <&rp1_clocks RP1_CLK_VEC>; + assigned-clock-rates = <1188000000>, + <108000000>, + <108000000>; + assigned-clock-parents = <0>, + <&rp1_clocks RP1_PLL_VIDEO_CORE>, + <&rp1_clocks RP1_PLL_VIDEO_SEC>; + }; + + rp1_dpi: dpi@148000 { + compatible = "raspberrypi,rp1dpi"; + status = "disabled"; + reg = <0xc0 0x40148000 0x0 0x1000>, // VIDEO_OUT DPI + <0xc0 0x40140000 0x0 0x1000>; // VIDEO_OUT_CFG + + interrupts = ; + + clocks = <&rp1_clocks RP1_CLK_DPI>, // DPI pixel clock + <&rp1_clocks RP1_PLL_VIDEO>, // PLL primary divider, and + <&rp1_clocks RP1_PLL_VIDEO_CORE>; // VCO, which we also control + clock-names = "dpiclk", "plldiv", "pllcore"; + + assigned-clocks = <&rp1_clocks RP1_CLK_DPI>; + assigned-clock-parents = <&rp1_clocks RP1_PLL_VIDEO>; + }; + }; +}; + +&clocks { + clk_xosc: clk_xosc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "xosc"; + clock-frequency = <50000000>; + }; + macb_pclk: macb_pclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "pclk"; + clock-frequency = <200000000>; + }; + macb_hclk: macb_hclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "hclk"; + clock-frequency = <200000000>; + }; + sdio_src: sdio_src { + // 400 MHz on FPGA. PLL sys VCO on asic + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "src"; + clock-frequency = <1000000000>; + }; + sdhci_core: sdhci_core { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "core"; + clock-frequency = <50000000>; + }; + clksrc_mipi0_dsi_byteclk: clksrc_mipi0_dsi_byteclk { + // This clock is synthesized by MIPI0 D-PHY, when DSI is running. + // Its frequency is not known a priori (until a panel driver attaches) + // so assign a made-up frequency of 72MHz so it can be divided for DPI. + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "clksrc_mipi0_dsi_byteclk"; + clock-frequency = <72000000>; + }; + clksrc_mipi1_dsi_byteclk: clksrc_mipi1_dsi_byteclk { + // This clock is synthesized by MIPI1 D-PHY, when DSI is running. + // Its frequency is not known a priori (until a panel driver attaches) + // so assign a made-up frequency of 72MHz so it can be divided for DPI. + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "clksrc_mipi1_dsi_byteclk"; + clock-frequency = <72000000>; + }; +}; + +/ { + rp1_vdd_3v3: rp1_vdd_3v3 { + compatible = "regulator-fixed"; + regulator-name = "vdd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; --- a/arch/arm/boot/dts/overlays/Makefile +++ b/arch/arm/boot/dts/overlays/Makefile @@ -49,8 +49,10 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ dionaudio-loco.dtbo \ dionaudio-loco-v2.dtbo \ disable-bt.dtbo \ + disable-bt-pi5.dtbo \ disable-emmc2.dtbo \ disable-wifi.dtbo \ + disable-wifi-pi5.dtbo \ dpi18.dtbo \ dpi18cpadhi.dtbo \ dpi24.dtbo \ @@ -106,8 +108,12 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ i2c-rtc-gpio.dtbo \ i2c-sensor.dtbo \ i2c0.dtbo \ + i2c0-pi5.dtbo \ i2c1.dtbo \ + i2c1-pi5.dtbo \ + i2c2-pi5.dtbo \ i2c3.dtbo \ + i2c3-pi5.dtbo \ i2c4.dtbo \ i2c5.dtbo \ i2c6.dtbo \ @@ -150,10 +156,15 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ media-center.dtbo \ merus-amp.dtbo \ midi-uart0.dtbo \ + midi-uart0-pi5.dtbo \ midi-uart1.dtbo \ + midi-uart1-pi5.dtbo \ midi-uart2.dtbo \ + midi-uart2-pi5.dtbo \ midi-uart3.dtbo \ + midi-uart3-pi5.dtbo \ midi-uart4.dtbo \ + midi-uart4-pi5.dtbo \ midi-uart5.dtbo \ minipitft13.dtbo \ miniuart-bt.dtbo \ @@ -231,14 +242,20 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ spi1-2cs.dtbo \ spi1-3cs.dtbo \ spi2-1cs.dtbo \ + spi2-1cs-pi5.dtbo \ spi2-2cs.dtbo \ + spi2-2cs-pi5.dtbo \ spi2-3cs.dtbo \ spi3-1cs.dtbo \ + spi3-1cs-pi5.dtbo \ spi3-2cs.dtbo \ + spi3-2cs-pi5.dtbo \ spi4-1cs.dtbo \ spi4-2cs.dtbo \ spi5-1cs.dtbo \ + spi5-1cs-pi5.dtbo \ spi5-2cs.dtbo \ + spi5-2cs-pi5.dtbo \ spi6-1cs.dtbo \ spi6-2cs.dtbo \ ssd1306.dtbo \ @@ -253,10 +270,15 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ tpm-slb9670.dtbo \ tpm-slb9673.dtbo \ uart0.dtbo \ + uart0-pi5.dtbo \ uart1.dtbo \ + uart1-pi5.dtbo \ uart2.dtbo \ + uart2-pi5.dtbo \ uart3.dtbo \ + uart3-pi5.dtbo \ uart4.dtbo \ + uart4-pi5.dtbo \ uart5.dtbo \ udrc.dtbo \ ugreen-dabboard.dtbo \ @@ -276,6 +298,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ vc4-kms-kippah-7inch.dtbo \ vc4-kms-v3d.dtbo \ vc4-kms-v3d-pi4.dtbo \ + vc4-kms-v3d-pi5.dtbo \ vc4-kms-vga666.dtbo \ vga666.dtbo \ vl805.dtbo \ --- a/arch/arm/boot/dts/overlays/README +++ b/arch/arm/boot/dts/overlays/README @@ -151,6 +151,9 @@ Params: bdaddr=06:05:04:03:02:01 will set the BDADDR to 01:02:03:04:05:06. + button_debounce Set the debounce delay (in ms) on the power/ + shutdown button (default 50ms) + cam0_reg Enables CAM 0 regulator. Only required on CM1 & 3. @@ -167,6 +170,9 @@ Params: Default of GPIO expander 5 on CM4, but override switches to normal GPIO. + cooling_fan Enables the Pi 5 cooling fan (enabled + automatically by the firmware) + eee Enable Energy Efficient Ethernet support for compatible devices (default "on"). See also "tx_lpi_timer". Pi3B+ only. @@ -206,23 +212,29 @@ Params: hdmi Set to "off" to disable the HDMI interface (default "on") + i2c An alias for i2c_arm + i2c_arm Set to "on" to enable the ARM's i2c interface (default "off") + i2c_arm_baudrate Set the baudrate of the ARM's i2c interface + (default "100000") + + i2c_baudrate An alias for i2c_arm_baudrate + + i2c_csi_dsi Set to "on" to enable the i2c_csi_dsi interface + + i2c_csi_dsi0 Set to "on" to enable the i2c_csi_dsi0 interface + + i2c_csi_dsi1 Set to "on" to enable the i2c_csi_dsi1 interface + i2c_vc Set to "on" to enable the i2c interface usually reserved for the VideoCore processor (default "off") - i2c An alias for i2c_arm - - i2c_arm_baudrate Set the baudrate of the ARM's i2c interface - (default "100000") - i2c_vc_baudrate Set the baudrate of the VideoCore i2c interface (default "100000") - i2c_baudrate An alias for i2c_arm_baudrate - i2s Set to "on" to enable the i2s interface (default "off") @@ -237,11 +249,23 @@ Params: krnbt_baudrate Set the baudrate of the PL011 UART when used with krnbt=on + nvme Alias for "pciex1" (2712 only) + pcie Set to "off" to disable the PCIe interface (default "on") (2711 only, but not applicable on CM4S) N.B. USB-A ports on 4B are subsequently disabled + pciex1 Set to "on" to enable the external PCIe link + (2712 only, default "off") + + pciex1_gen Sets the PCIe "GEN"/speed for the external PCIe + link (2712 only, default "2") + + pciex1_no_l0s Set to "on" to disable ASPM L0s on the external + PCIe link for devices that have broken + implementations (2712 only, default "off") + spi Set to "on" to enable the spi interfaces (default "off") @@ -252,6 +276,11 @@ Params: random Set to "on" to enable the hardware random number generator (default "on") + rtc_bbat_vchg Set the RTC backup battery charging voltage in + microvolts. If set to 0 or not specified, the + trickle charger is disabled. + (2712 only, default "0") + sd Set to "off" to disable the SD card (or eMMC on non-lite SKU of CM4). (default "on") @@ -276,18 +305,30 @@ Params: sdio_overclock Clock (in MHz) to use when the MMC framework requests 50MHz for the SDIO/WLAN interface. + suspend Make the power button trigger a suspend rather + than a power-off (2712 only, default "off") + tx_lpi_timer Set the delay in microseconds between going idle and entering the low power state (default 600). Requires EEE to be enabled - see "eee". uart0 Set to "off" to disable uart0 (default "on") + uart0_console Move the kernel boot console to UART0 on pins + 6, 8 and 10 of the 40-way header (2712 only, + default "off") + uart1 Set to "on" or "off" to enable or disable uart1 (default varies) watchdog Set to "on" to enable the hardware watchdog (default "off") + wifiaddr Set an alternative WiFi MAC address. + The value should be a 6-byte hexadecimal value, + with or without colon separators, written in the + natural (big-endian) order. + act_led_trigger Choose which activity the LED tracks. Use "heartbeat" for a nice load indicator. (default "mmc") @@ -919,14 +960,16 @@ Params: 24db_digital_gain Allow ga Name: disable-bt -Info: Disable onboard Bluetooth on Pi 3B, 3B+, 3A+, 4B and Zero W, restoring - UART0/ttyAMA0 over GPIOs 14 & 15. - N.B. To disable the systemd service that initialises the modem so it - doesn't use the UART, use 'sudo systemctl disable hciuart'. +Info: Disable onboard Bluetooth on Bluetooth-capable Raspberry Pis. On Pis + prior to Pi 5 this restores UART0/ttyAMA0 over GPIOs 14 & 15. Load: dtoverlay=disable-bt Params: +Name: disable-bt-pi5 +Info: See disable-bt + + Name: disable-emmc2 Info: Disable EMMC2 controller on BCM2711. The allows the onboard EMMC storage on Compute Module 4 to be disabled @@ -936,11 +979,15 @@ Params: Name: disable-wifi -Info: Disable onboard WLAN on Pi 3B, 3B+, 3A+, 4B and Zero W. +Info: Disable onboard WLAN on WiFi-capable Raspberry Pis. Load: dtoverlay=disable-wifi Params: +Name: disable-wifi-pi5 +Info: See disable-wifi + + Name: dpi18 Info: Overlay for a generic 18-bit DPI display This uses GPIOs 0-21 (so no I2C, uart etc.), and activates the output @@ -2233,6 +2280,15 @@ Info: Deprecated, legacy version of i2 Load: +Name: i2c0-pi5 +Info: Enable i2c0 (Pi 5 only) +Load: dtoverlay=i2c0-pi5,= +Params: pins_0_1 Use GPIOs 0 and 1 (default) + pins_8_9 Use GPIOs 8 and 9 + baudrate Set the baudrate for the interface (default + "100000") + + Name: i2c1 Info: Change i2c1 pin usage. Not all pin combinations are usable on all platforms - platforms other then Compute Modules can only use this @@ -2249,6 +2305,24 @@ Info: Deprecated, legacy version of i2 Load: +Name: i2c1-pi5 +Info: Enable i2c1 (Pi 5 only) +Load: dtoverlay=i2c1-pi5,= +Params: pins_2_3 Use GPIOs 2 and 3 (default) + pins_10_11 Use GPIOs 10 and 11 + baudrate Set the baudrate for the interface (default + "100000") + + +Name: i2c2-pi5 +Info: Enable i2c2 (Pi 5 only) +Load: dtoverlay=i2c2-pi5,= +Params: pins_4_5 Use GPIOs 4 and 5 (default) + pins_12_13 Use GPIOs 12 and 13 + baudrate Set the baudrate for the interface (default + "100000") + + Name: i2c3 Info: Enable the i2c3 bus. BCM2711 only. Load: dtoverlay=i2c3, @@ -2258,6 +2332,16 @@ Params: pins_2_3 Use GPIO "100000") +Name: i2c3-pi5 +Info: Enable i2c3 (Pi 5 only) +Load: dtoverlay=i2c3-pi5,= +Params: pins_6_7 Use GPIOs 6 and 7 (default) + pins_14_15 Use GPIOs 14 and 15 + pins_22_23 Use GPIOs 22 and 23 + baudrate Set the baudrate for the interface (default + "100000") + + Name: i2c4 Info: Enable the i2c4 bus. BCM2711 only. Load: dtoverlay=i2c4, @@ -2869,6 +2953,10 @@ Load: dtoverlay=midi-uart0 Params: +Name: midi-uart0-pi5 +Info: See midi-uart0 (this is the Pi 5 version) + + Name: midi-uart1 Info: Configures UART1 (ttyS0) so that a requested 38.4kbaud actually gets 31.25kbaud, the frequency required for MIDI @@ -2876,29 +2964,45 @@ Load: dtoverlay=midi-uart1 Params: +Name: midi-uart1-pi5 +Info: See midi-uart1 (this is the Pi 5 version) + + Name: midi-uart2 -Info: Configures UART2 (ttyAMA1) so that a requested 38.4kbaud actually gets +Info: Configures UART2 (ttyAMA2) so that a requested 38.4kbaud actually gets 31.25kbaud, the frequency required for MIDI Load: dtoverlay=midi-uart2 Params: +Name: midi-uart2-pi5 +Info: See midi-uart2 (this is the Pi 5 version) + + Name: midi-uart3 -Info: Configures UART3 (ttyAMA2) so that a requested 38.4kbaud actually gets +Info: Configures UART3 (ttyAMA3) so that a requested 38.4kbaud actually gets 31.25kbaud, the frequency required for MIDI Load: dtoverlay=midi-uart3 Params: +Name: midi-uart3-pi5 +Info: See midi-uart3 (this is the Pi 5 version) + + Name: midi-uart4 -Info: Configures UART4 (ttyAMA3) so that a requested 38.4kbaud actually gets +Info: Configures UART4 (ttyAMA4) so that a requested 38.4kbaud actually gets 31.25kbaud, the frequency required for MIDI Load: dtoverlay=midi-uart4 Params: +Name: midi-uart4-pi5 +Info: See midi-uart4 (this is the Pi 5 version) + + Name: midi-uart5 -Info: Configures UART5 (ttyAMA4) so that a requested 38.4kbaud actually gets +Info: Configures UART5 (ttyAMA5) so that a requested 38.4kbaud actually gets 31.25kbaud, the frequency required for MIDI Load: dtoverlay=midi-uart5 Params: @@ -3921,105 +4025,131 @@ Name: spi1-1cs Info: Enables spi1 with a single chip select (CS) line and associated spidev dev node. The gpio pin number for the CS line and spidev device node creation are configurable. - N.B.: spi1 is only accessible on devices with a 40pin header, eg: - A+, B+, Zero and PI2 B; as well as the Compute Module. + N.B.: spi1 is not accessible on old Pis without a 40-pin header. Load: dtoverlay=spi1-1cs,= Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0). - cs0_spidev Set to 'disabled' to stop the creation of a + cs0_spidev Set to 'off' to stop the creation of a userspace device node /dev/spidev1.0 (default - is 'okay' or enabled). + is 'on' or enabled). Name: spi1-2cs Info: Enables spi1 with two chip select (CS) lines and associated spidev dev nodes. The gpio pin numbers for the CS lines and spidev device node creation are configurable. - N.B.: spi1 is only accessible on devices with a 40pin header, eg: - A+, B+, Zero and PI2 B; as well as the Compute Module. + N.B.: spi1 is not accessible on old Pis without a 40-pin header. Load: dtoverlay=spi1-2cs,= Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0). cs1_pin GPIO pin for CS1 (default 17 - BCM SPI1_CE1). - cs0_spidev Set to 'disabled' to stop the creation of a + cs0_spidev Set to 'off' to stop the creation of a userspace device node /dev/spidev1.0 (default - is 'okay' or enabled). - cs1_spidev Set to 'disabled' to stop the creation of a + is 'on' or enabled). + cs1_spidev Set to 'off' to stop the creation of a userspace device node /dev/spidev1.1 (default - is 'okay' or enabled). + is 'on' or enabled). Name: spi1-3cs Info: Enables spi1 with three chip select (CS) lines and associated spidev dev nodes. The gpio pin numbers for the CS lines and spidev device node creation are configurable. - N.B.: spi1 is only accessible on devices with a 40pin header, eg: - A+, B+, Zero and PI2 B; as well as the Compute Module. + N.B.: spi1 is not accessible on old Pis without a 40-pin header. Load: dtoverlay=spi1-3cs,= Params: cs0_pin GPIO pin for CS0 (default 18 - BCM SPI1_CE0). cs1_pin GPIO pin for CS1 (default 17 - BCM SPI1_CE1). cs2_pin GPIO pin for CS2 (default 16 - BCM SPI1_CE2). - cs0_spidev Set to 'disabled' to stop the creation of a + cs0_spidev Set to 'off' to stop the creation of a userspace device node /dev/spidev1.0 (default - is 'okay' or enabled). - cs1_spidev Set to 'disabled' to stop the creation of a + is 'on' or enabled). + cs1_spidev Set to 'off' to stop the creation of a userspace device node /dev/spidev1.1 (default - is 'okay' or enabled). - cs2_spidev Set to 'disabled' to stop the creation of a + is 'on' or enabled). + cs2_spidev Set to 'off' to stop the creation of a userspace device node /dev/spidev1.2 (default - is 'okay' or enabled). + is 'on' or enabled). Name: spi2-1cs -Info: Enables spi2 with a single chip select (CS) line and associated spidev - dev node. The gpio pin number for the CS line and spidev device node - creation are configurable. - N.B.: spi2 is only accessible with the Compute Module. +Info: Enables spi2 on GPIOs 40-42 with a single chip select (CS) line and + associated spidev dev node. The gpio pin number for the CS line and + spidev device node creation are configurable. spi2-2cs-pi5 is + substituted on a Pi 5. + N.B.: spi2 is only accessible with the Compute Module or Pi 5. Load: dtoverlay=spi2-1cs,= Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0). - cs0_spidev Set to 'disabled' to stop the creation of a + cs0_spidev Set to 'off' to stop the creation of a userspace device node /dev/spidev2.0 (default - is 'okay' or enabled). + is 'on' or enabled). + + +Name: spi2-1cs-pi5 +Info: Enables spi2 on GPIOs 1-3 with a single chip select (CS) line and + associated spidev dev node. The gpio pin number for the CS line and + spidev device node creation are configurable. Pi 5 only. +Load: dtoverlay=spi2-1cs-pi5,= +Params: cs0_pin GPIO pin for CS0 (default 0). + cs0_spidev Set to 'off' to stop the creation of a + userspace device node /dev/spidev2.0 (default + is 'on' or enabled). Name: spi2-2cs -Info: Enables spi2 with two chip select (CS) lines and associated spidev - dev nodes. The gpio pin numbers for the CS lines and spidev device node - creation are configurable. - N.B.: spi2 is only accessible with the Compute Module. +Info: Enables spi2 on GPIOs 40-42 with two chip select (CS) lines and + associated spidev dev nodes. The gpio pin numbers for the CS lines and + spidev device node creation are configurable. spi2-2cs-pi5 is + substituted on a Pi 5. + N.B.: spi2 is only accessible with the Compute Module or Pi 5. Load: dtoverlay=spi2-2cs,= Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0). cs1_pin GPIO pin for CS1 (default 44 - BCM SPI2_CE1). - cs0_spidev Set to 'disabled' to stop the creation of a + cs0_spidev Set to 'off' to stop the creation of a + userspace device node /dev/spidev2.0 (default + is 'on' or enabled). + cs1_spidev Set to 'off' to stop the creation of a + userspace device node /dev/spidev2.1 (default + is 'on' or enabled). + + +Name: spi2-2cs-pi5 +Info: Enables spi2 on GPIOs 1-3 with two chip select (CS) lines and + associated spidev dev nodes. The gpio pin numbers for the CS lines and + spidev device node creation are configurable. Pi 5 only. +Load: dtoverlay=spi2-2cs-pi5,= +Params: cs0_pin GPIO pin for CS0 (default 0). + cs1_pin GPIO pin for CS1 (default 24). + cs0_spidev Set to 'off' to stop the creation of a userspace device node /dev/spidev2.0 (default - is 'okay' or enabled). - cs1_spidev Set to 'disabled' to stop the creation of a + is 'on' or enabled). + cs1_spidev Set to 'off' to stop the creation of a userspace device node /dev/spidev2.1 (default - is 'okay' or enabled). + is 'on' or enabled). Name: spi2-3cs -Info: Enables spi2 with three chip select (CS) lines and associated spidev - dev nodes. The gpio pin numbers for the CS lines and spidev device node - creation are configurable. - N.B.: spi2 is only accessible with the Compute Module. +Info: Enables spi2 on GPIOs 40-42 with three chip select (CS) lines and + associated spidev dev nodes. The gpio pin numbers for the CS lines and + spidev device node creation are configurable. + N.B.: spi2 is only accessible with the Compute Module or Pi 5. Load: dtoverlay=spi2-3cs,= Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0). cs1_pin GPIO pin for CS1 (default 44 - BCM SPI2_CE1). cs2_pin GPIO pin for CS2 (default 45 - BCM SPI2_CE2). - cs0_spidev Set to 'disabled' to stop the creation of a + cs0_spidev Set to 'off' to stop the creation of a userspace device node /dev/spidev2.0 (default - is 'okay' or enabled). - cs1_spidev Set to 'disabled' to stop the creation of a + is 'on' or enabled). + cs1_spidev Set to 'off' to stop the creation of a userspace device node /dev/spidev2.1 (default - is 'okay' or enabled). - cs2_spidev Set to 'disabled' to stop the creation of a + is 'on' or enabled). + cs2_spidev Set to 'off' to stop the creation of a userspace device node /dev/spidev2.2 (default - is 'okay' or enabled). + is 'on' or enabled). Name: spi3-1cs -Info: Enables spi3 with a single chip select (CS) line and associated spidev - dev node. The gpio pin number for the CS line and spidev device node - creation are configurable. BCM2711 only. +Info: Enables spi3 on GPIOs 1-3 with a single chip select (CS) line and + associated spidev dev node. The gpio pin number for the CS line and + spidev device node creation are configurable. BCM2711 only, + spi3-1cs-pi5 is substituted on Pi 5. Load: dtoverlay=spi3-1cs,= Params: cs0_pin GPIO pin for CS0 (default 0 - BCM SPI3_CE0). cs0_spidev Set to 'off' to prevent the creation of a @@ -4027,10 +4157,22 @@ Params: cs0_pin GPIO pin is 'on' or enabled). +Name: spi3-1cs-pi5 +Info: Enables spi3 on GPIOs 5-7 with a single chip select (CS) line and + associated spidev dev node. The gpio pin number for the CS line and + spidev device node creation are configurable. Pi 5 only. +Load: dtoverlay=spi3-1cs-pi5,= +Params: cs0_pin GPIO pin for CS0 (default 4). + cs0_spidev Set to 'off' to prevent the creation of a + userspace device node /dev/spidev3.0 (default + is 'on' or enabled). + + Name: spi3-2cs -Info: Enables spi3 with two chip select (CS) lines and associated spidev - dev nodes. The gpio pin numbers for the CS lines and spidev device node - creation are configurable. BCM2711 only. +Info: Enables spi3 on GPIO2 1-3 with two chip select (CS) lines and + associated spidev dev nodes. The gpio pin numbers for the CS lines and + spidev device node creation are configurable. BCM2711 only, + spi3-2cs-pi5 is substituted on Pi 5. Load: dtoverlay=spi3-2cs,= Params: cs0_pin GPIO pin for CS0 (default 0 - BCM SPI3_CE0). cs1_pin GPIO pin for CS1 (default 24 - BCM SPI3_CE1). @@ -4042,10 +4184,25 @@ Params: cs0_pin GPIO pin is 'on' or enabled). +Name: spi3-2cs-pi5 +Info: Enables spi3 on GPIOs 5-7 with two chip select (CS) lines and + associated spidev dev nodes. The gpio pin numbers for the CS lines and + spidev device node creation are configurable. Pi 5 only. +Load: dtoverlay=spi3-2cs-pi5,= +Params: cs0_pin GPIO pin for CS0 (default 4). + cs1_pin GPIO pin for CS1 (default 25). + cs0_spidev Set to 'off' to prevent the creation of a + userspace device node /dev/spidev3.0 (default + is 'on' or enabled). + cs1_spidev Set to 'off' to prevent the creation of a + userspace device node /dev/spidev3.1 (default + is 'on' or enabled). + + Name: spi4-1cs -Info: Enables spi4 with a single chip select (CS) line and associated spidev - dev node. The gpio pin number for the CS line and spidev device node - creation are configurable. BCM2711 only. +Info: Enables spi4 on GPIOs 5-7 with a single chip select (CS) line and + associated spidev dev node. The gpio pin number for the CS line and + spidev device node creation are configurable. BCM2711 only. Load: dtoverlay=spi4-1cs,= Params: cs0_pin GPIO pin for CS0 (default 4 - BCM SPI4_CE0). cs0_spidev Set to 'off' to prevent the creation of a @@ -4054,9 +4211,9 @@ Params: cs0_pin GPIO pin Name: spi4-2cs -Info: Enables spi4 with two chip select (CS) lines and associated spidev - dev nodes. The gpio pin numbers for the CS lines and spidev device node - creation are configurable. BCM2711 only. +Info: Enables spi4 on GPIOs 5-6 with two chip select (CS) lines and + associated spidev dev nodes. The gpio pin numbers for the CS lines and + spidev device node creation are configurable. BCM2711 only. Load: dtoverlay=spi4-2cs,= Params: cs0_pin GPIO pin for CS0 (default 4 - BCM SPI4_CE0). cs1_pin GPIO pin for CS1 (default 25 - BCM SPI4_CE1). @@ -4069,23 +4226,27 @@ Params: cs0_pin GPIO pin Name: spi5-1cs -Info: Enables spi5 with a single chip select (CS) line and associated spidev - dev node. The gpio pin numbers for the CS lines and spidev device node - creation are configurable. BCM2711 only. +Info: Enables spi5 on GPIOs 13-15 with a single chip select (CS) line and + associated spidev dev node. The gpio pin numbers for the CS lines and + spidev device node creation are configurable. BCM2711 and Pi 5. Load: dtoverlay=spi5-1cs,= -Params: cs0_pin GPIO pin for CS0 (default 12 - BCM SPI5_CE0). +Params: cs0_pin GPIO pin for CS0 (default 12). cs0_spidev Set to 'off' to prevent the creation of a userspace device node /dev/spidev5.0 (default is 'on' or enabled). +Name: spi5-1cs-pi5 +Info: See spi5-1cs + + Name: spi5-2cs -Info: Enables spi5 with two chip select (CS) lines and associated spidev - dev nodes. The gpio pin numbers for the CS lines and spidev device node - creation are configurable. BCM2711 only. +Info: Enables spi5 on GPIOs 13-15 with two chip select (CS) lines and + associated spidev dev nodes. The gpio pin numbers for the CS lines and + spidev device node creation are configurable. BCM2711 and Pi 5. Load: dtoverlay=spi5-2cs,= -Params: cs0_pin GPIO pin for CS0 (default 12 - BCM SPI5_CE0). - cs1_pin GPIO pin for CS1 (default 26 - BCM SPI5_CE1). +Params: cs0_pin GPIO pin for CS0 (default 12). + cs1_pin GPIO pin for CS1 (default 26). cs0_spidev Set to 'off' to prevent the creation of a userspace device node /dev/spidev5.0 (default is 'on' or enabled). @@ -4094,6 +4255,10 @@ Params: cs0_pin GPIO pin is 'on' or enabled). +Name: spi5-2cs-pi5 +Info: See spi5-2cs + + Name: spi6-1cs Info: Enables spi6 with a single chip select (CS) line and associated spidev dev node. The gpio pin number for the CS line and spidev device node @@ -4296,6 +4461,12 @@ Params: txd0_pin GPIO pin 7(Alt3) for 32&33, 6(Alt2) for 36&37 +Name: uart0-pi5 +Info: Enable uart 0 on GPIOs 14-15. Pi 5 only. +Load: dtoverlay=uart0-pi5, +Params: ctsrts Enable CTS/RTS on GPIOs 16-17 (default off) + + Name: uart1 Info: Change the pin usage of uart1 Load: dtoverlay=uart1,= @@ -4304,24 +4475,48 @@ Params: txd1_pin GPIO pin rxd1_pin GPIO pin for RXD1 (15, 33 or 41 - default 15) +Name: uart1-pi5 +Info: Enable uart 1 on GPIOs 0-1. Pi 5 only. +Load: dtoverlay=uart1-pi5, +Params: ctsrts Enable CTS/RTS on GPIOs 2-3 (default off) + + Name: uart2 Info: Enable uart 2 on GPIOs 0-3. BCM2711 only. Load: dtoverlay=uart2, Params: ctsrts Enable CTS/RTS on GPIOs 2-3 (default off) +Name: uart2-pi5 +Info: Enable uart 2 on GPIOs 4-5. Pi 5 only. +Load: dtoverlay=uart2-pi5, +Params: ctsrts Enable CTS/RTS on GPIOs 6-7 (default off) + + Name: uart3 Info: Enable uart 3 on GPIOs 4-7. BCM2711 only. Load: dtoverlay=uart3, Params: ctsrts Enable CTS/RTS on GPIOs 6-7 (default off) +Name: uart3-pi5 +Info: Enable uart 3 on GPIOs 8-9. Pi 5 only. +Load: dtoverlay=uart3-pi5, +Params: ctsrts Enable CTS/RTS on GPIOs 10-11 (default off) + + Name: uart4 Info: Enable uart 4 on GPIOs 8-11. BCM2711 only. Load: dtoverlay=uart4, Params: ctsrts Enable CTS/RTS on GPIOs 10-11 (default off) +Name: uart4-pi5 +Info: Enable uart 4 on GPIOs 12-13. Pi 5 only. +Load: dtoverlay=uart4-pi5, +Params: ctsrts Enable CTS/RTS on GPIOs 14-15 (default off) + + Name: uart5 Info: Enable uart 5 on GPIOs 12-15. BCM2711 only. Load: dtoverlay=uart5, @@ -4530,6 +4725,8 @@ Params: sizex Touchscr invy Touchscreen inverted y axis swapxy Touchscreen swapped x y axis disable_touch Disables the touch screen overlay driver + dsi0 Use DSI0 and i2c_csi_dsi0 (rather than + the default DSI1 and i2c_csi_dsi). Name: vc4-kms-dsi-lt070me05000 @@ -4579,6 +4776,8 @@ Params: 2_8_inch 2.8" 480 invx Touchscreen inverted x axis invy Touchscreen inverted y axis swapxy Touchscreen swapped x y axis + dsi0 Use DSI0 and i2c_csi_dsi0 (rather than + the default DSI1 and i2c_csi_dsi). Name: vc4-kms-kippah-7inch @@ -4633,6 +4832,9 @@ Params: cma-512 CMA is 5 nohdmi1 Disable HDMI 1 output +Name: vc4-kms-v3d-pi5 +Info: See vc4-kms-v3d-pi4 (this is the Pi 5 version) + Name: vc4-kms-vga666 Info: Enable the VGA666 (resistor ladder ADC) for the vc4-kms-v3d driver. --- a/arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts +++ b/arch/arm/boot/dts/overlays/adau1977-adc-overlay.dts @@ -23,7 +23,7 @@ }; fragment@1 { - target = <&i2s>; + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; @@ -33,7 +33,7 @@ target = <&sound>; __overlay__ { compatible = "adi,adau1977-adc"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_consumer>; status = "okay"; }; }; --- a/arch/arm/boot/dts/overlays/adau7002-simple-overlay.dts +++ b/arch/arm/boot/dts/overlays/adau7002-simple-overlay.dts @@ -5,7 +5,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -37,7 +37,7 @@ "PDM_DAT", "Microphone Jack"; status = "okay"; simple-audio-card,cpu { - sound-dai = <&i2s>; + sound-dai = <&i2s_clk_producer>; }; dailink0_slave: simple-audio-card,codec { sound-dai = <&adau7002_codec>; --- a/arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts +++ b/arch/arm/boot/dts/overlays/akkordion-iqdacplus-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -38,7 +38,7 @@ card_name = "Akkordion"; dai_name = "IQaudIO DAC"; dai_stream_name = "IQaudIO DAC HiFi"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; status = "okay"; }; }; --- a/arch/arm/boot/dts/overlays/allo-boss-dac-pcm512x-audio-overlay.dts +++ b/arch/arm/boot/dts/overlays/allo-boss-dac-pcm512x-audio-overlay.dts @@ -18,8 +18,8 @@ }; }; - fragment@1 { - target = <&i2s>; + frag1: fragment@1 { + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; @@ -46,7 +46,7 @@ target = <&sound>; boss_dac: __overlay__ { compatible = "allo,boss-dac"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_consumer>; mute-gpios = <&gpio 6 1>; status = "okay"; }; @@ -54,6 +54,8 @@ __overrides__ { 24db_digital_gain = <&boss_dac>,"allo,24db_digital_gain?"; - slave = <&boss_dac>,"allo,slave?"; + slave = <&boss_dac>,"allo,slave?", + <&frag1>,"target:0=",<&i2s_clk_producer>, + <&boss_dac>,"i2s-controller:0=",<&i2s_clk_producer>; }; }; --- a/arch/arm/boot/dts/overlays/allo-boss2-dac-audio-overlay.dts +++ b/arch/arm/boot/dts/overlays/allo-boss2-dac-audio-overlay.dts @@ -8,7 +8,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_consumer>; __overlay__ { #sound-dai-cells = <0>; status = "okay"; --- a/arch/arm/boot/dts/overlays/allo-digione-overlay.dts +++ b/arch/arm/boot/dts/overlays/allo-digione-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; @@ -35,7 +35,7 @@ target = <&sound>; __overlay__ { compatible = "allo,allo-digione"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_consumer>; status = "okay"; clock44-gpio = <&gpio 5 0>; clock48-gpio = <&gpio 6 0>; --- a/arch/arm/boot/dts/overlays/allo-katana-dac-audio-overlay.dts +++ b/arch/arm/boot/dts/overlays/allo-katana-dac-audio-overlay.dts @@ -9,7 +9,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_consumer>; __overlay__ { #sound-dai-cells = <0>; status = "okay"; --- a/arch/arm/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts +++ b/arch/arm/boot/dts/overlays/allo-piano-dac-pcm512x-audio-overlay.dts @@ -16,7 +16,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -42,7 +42,7 @@ target = <&sound>; piano_dac: __overlay__ { compatible = "allo,piano-dac"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; status = "okay"; }; }; --- a/arch/arm/boot/dts/overlays/allo-piano-dac-plus-pcm512x-audio-overlay.dts +++ b/arch/arm/boot/dts/overlays/allo-piano-dac-plus-pcm512x-audio-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -41,7 +41,7 @@ piano_dac: __overlay__ { compatible = "allo,piano-dac-plus"; audio-codec = <&allo_pcm5122_4c &allo_pcm5122_4d>; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; mute1-gpios = <&gpio 6 1>; mute2-gpios = <&gpio 25 1>; status = "okay"; --- a/arch/arm/boot/dts/overlays/applepi-dac-overlay.dts +++ b/arch/arm/boot/dts/overlays/applepi-dac-overlay.dts @@ -16,7 +16,7 @@ format = "i2s"; p_cpu_dai: cpu { - sound-dai = <&i2s>; + sound-dai = <&i2s_clk_producer>; dai-tdm-slot-num = <2>; dai-tdm-slot-width = <32>; }; @@ -40,7 +40,7 @@ }; fragment@2 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { #sound-dai-cells = <0>; status = "okay"; --- a/arch/arm/boot/dts/overlays/arducam-64mp-overlay.dts +++ b/arch/arm/boot/dts/overlays/arducam-64mp-overlay.dts @@ -67,7 +67,7 @@ rotation = <&cam_node>,"rotation:0"; orientation = <&cam_node>,"orientation:0"; media-controller = <&csi>,"brcm,media-controller?"; - cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>, + cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>, <&csi_frag>, "target:0=",<&csi0>, <&clk_frag>, "target:0=",<&cam0_clk>, <&cam_node>, "clocks:0=",<&cam0_clk>, --- a/arch/arm/boot/dts/overlays/arducam-pivariety-overlay.dts +++ b/arch/arm/boot/dts/overlays/arducam-pivariety-overlay.dts @@ -85,7 +85,7 @@ rotation = <&arducam_pivariety>,"rotation:0"; orientation = <&arducam_pivariety>,"orientation:0"; media-controller = <&csi>,"brcm,media-controller?"; - cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>, + cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>, <&csi_frag>, "target:0=",<&csi0>, <&clk_frag>, "target:0=",<&cam0_clk>, <&arducam_pivariety>, "clocks:0=",<&cam0_clk>, --- a/arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts +++ b/arch/arm/boot/dts/overlays/audioinjector-addons-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -48,7 +48,7 @@ mult-gpios = <&gpio 27 0>, <&gpio 22 0>, <&gpio 23 0>, <&gpio 24 0>; reset-gpios = <&gpio 5 0>; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; codec = <&cs42448>; status = "okay"; }; --- a/arch/arm/boot/dts/overlays/audioinjector-bare-i2s-overlay.dts +++ b/arch/arm/boot/dts/overlays/audioinjector-bare-i2s-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -27,7 +27,7 @@ target = <&sound>; __overlay__ { compatible = "simple-audio-card"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; status = "okay"; simple-audio-card,name = "audioinjector-bare"; @@ -37,7 +37,7 @@ simple-audio-card,frame-master = <&dailink0_master>; dailink0_master: simple-audio-card,cpu { - sound-dai = <&i2s>; + sound-dai = <&i2s_clk_producer>; dai-tdm-slot-num = <2>; dai-tdm-slot-width = <32>; }; --- a/arch/arm/boot/dts/overlays/audioinjector-isolated-soundcard-overlay.dts +++ b/arch/arm/boot/dts/overlays/audioinjector-isolated-soundcard-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; @@ -47,7 +47,7 @@ snd: __overlay__ { compatible = "ai,audioinjector-isolated-soundcard"; mute-gpios = <&gpio 17 0>; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_consumer>; codec = <&cs4272>; status = "okay"; }; --- a/arch/arm/boot/dts/overlays/audioinjector-ultra-overlay.dts +++ b/arch/arm/boot/dts/overlays/audioinjector-ultra-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; @@ -33,7 +33,7 @@ target = <&sound>; __overlay__ { compatible = "simple-audio-card"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_consumer>; status = "okay"; simple-audio-card,name = "audioinjector-ultra"; @@ -57,7 +57,7 @@ simple-audio-card,frame-master = <&sound_master>; simple-audio-card,cpu { - sound-dai = <&i2s>; + sound-dai = <&i2s_clk_consumer>; dai-tdm-slot-num = <2>; dai-tdm-slot-width = <32>; }; --- a/arch/arm/boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts +++ b/arch/arm/boot/dts/overlays/audioinjector-wm8731-audio-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; @@ -32,7 +32,7 @@ target = <&sound>; __overlay__ { compatible = "ai,audioinjector-pi-soundcard"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_consumer>; status = "okay"; }; }; --- a/arch/arm/boot/dts/overlays/audiosense-pi-overlay.dts +++ b/arch/arm/boot/dts/overlays/audiosense-pi-overlay.dts @@ -8,7 +8,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; @@ -75,7 +75,7 @@ target = <&sound>; __overlay__ { compatible = "as,audiosense-pi"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_consumer>; status = "okay"; }; }; --- a/arch/arm/boot/dts/overlays/chipdip-dac-overlay.dts +++ b/arch/arm/boot/dts/overlays/chipdip-dac-overlay.dts @@ -9,7 +9,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; @@ -32,7 +32,7 @@ target = <&sound>; __overlay__ { compatible = "chipdip,chipdip-dac"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_consumer>; sr0-gpios = <&gpio 5 0>; sr1-gpios = <&gpio 6 0>; sr2-gpios = <&gpio 12 0>; --- a/arch/arm/boot/dts/overlays/cirrus-wm5102-overlay.dts +++ b/arch/arm/boot/dts/overlays/cirrus-wm5102-overlay.dts @@ -9,7 +9,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; @@ -165,7 +165,7 @@ target = <&sound>; __overlay__ { compatible = "wlf,rpi-cirrus"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_consumer>; status = "okay"; }; }; --- a/arch/arm/boot/dts/overlays/dacberry400-overlay.dts +++ b/arch/arm/boot/dts/overlays/dacberry400-overlay.dts @@ -5,7 +5,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -62,7 +62,7 @@ target = <&sound>; __overlay__ { compatible = "osaelectronics,dacberry400"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; status = "okay"; }; }; --- a/arch/arm/boot/dts/overlays/dionaudio-kiwi-overlay.dts +++ b/arch/arm/boot/dts/overlays/dionaudio-kiwi-overlay.dts @@ -11,7 +11,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -32,7 +32,7 @@ target = <&sound>; __overlay__ { compatible = "dionaudio,dionaudio-kiwi"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; status = "okay"; }; }; --- a/arch/arm/boot/dts/overlays/dionaudio-loco-overlay.dts +++ b/arch/arm/boot/dts/overlays/dionaudio-loco-overlay.dts @@ -11,7 +11,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -32,7 +32,7 @@ target = <&sound>; __overlay__ { compatible = "dionaudio,loco-pcm5242-tpa3118"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; status = "okay"; }; }; --- a/arch/arm/boot/dts/overlays/dionaudio-loco-v2-overlay.dts +++ b/arch/arm/boot/dts/overlays/dionaudio-loco-v2-overlay.dts @@ -15,13 +15,13 @@ target = <&sound>; frag0: __overlay__ { compatible = "dionaudio,dionaudio-loco-v2"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; status = "okay"; }; }; fragment@1 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; --- /dev/null +++ b/arch/arm/boot/dts/overlays/disable-bt-pi5-overlay.dts @@ -0,0 +1,17 @@ +/dts-v1/; +/plugin/; + +/* Disable Bluetooth */ + +#include + +/{ + compatible = "brcm,bcm2712"; + + fragment@0 { + target = <&bluetooth>; + __overlay__ { + status = "disabled"; + }; + }; +}; --- /dev/null +++ b/arch/arm/boot/dts/overlays/disable-wifi-pi5-overlay.dts @@ -0,0 +1,13 @@ +/dts-v1/; +/plugin/; + +/{ + compatible = "brcm,bcm2712"; + + fragment@0 { + target = <&sdio2>; + __overlay__ { + status = "disabled"; + }; + }; +}; --- a/arch/arm/boot/dts/overlays/draws-overlay.dts +++ b/arch/arm/boot/dts/overlays/draws-overlay.dts @@ -9,7 +9,7 @@ / { compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -131,7 +131,7 @@ target = <&sound>; snd: __overlay__ { compatible = "simple-audio-card"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; status = "okay"; simple-audio-card,name = "draws"; @@ -153,7 +153,7 @@ "Line Out", "LOL"; dailink0_master: simple-audio-card,cpu { - sound-dai = <&i2s>; + sound-dai = <&i2s_clk_producer>; }; simple-audio-card,codec { --- a/arch/arm/boot/dts/overlays/edt-ft5406-overlay.dts +++ b/arch/arm/boot/dts/overlays/edt-ft5406-overlay.dts @@ -25,21 +25,21 @@ }; __overrides__ { - i2c0 = <&frag13>,"target:0=",<&i2c0>; - i2c1 = <&frag13>, "target?=0", - <&frag13>, "target-path=i2c1", + i2c0 = <&ts_i2c_frag>,"target:0=",<&i2c0>; + i2c1 = <&ts_i2c_frag>, "target?=0", + <&ts_i2c_frag>, "target-path=i2c1", <0>,"-0-1"; - i2c3 = <&frag13>, "target?=0", - <&frag13>, "target-path=i2c3", + i2c3 = <&ts_i2c_frag>, "target?=0", + <&ts_i2c_frag>, "target-path=i2c3", <0>,"-0-1"; - i2c4 = <&frag13>, "target?=0", - <&frag13>, "target-path=i2c4", + i2c4 = <&ts_i2c_frag>, "target?=0", + <&ts_i2c_frag>, "target-path=i2c4", <0>,"-0-1"; - i2c5 = <&frag13>, "target?=0", - <&frag13>, "target-path=i2c5", + i2c5 = <&ts_i2c_frag>, "target?=0", + <&ts_i2c_frag>, "target-path=i2c5", <0>,"-0-1"; - i2c6 = <&frag13>, "target?=0", - <&frag13>, "target-path=i2c6", + i2c6 = <&ts_i2c_frag>, "target?=0", + <&ts_i2c_frag>, "target-path=i2c6", <0>,"-0-1"; addr = <&ft5406>,"reg:0"; }; --- a/arch/arm/boot/dts/overlays/edt-ft5406.dtsi +++ b/arch/arm/boot/dts/overlays/edt-ft5406.dtsi @@ -22,11 +22,13 @@ }; }; - fragment@12 { - target = <&i2cbus>; + ts_i2c_frag: fragment@12 { + target = <&i2c_csi_dsi>; __overlay__ { #address-cells = <1>; #size-cells = <0>; + status = "okay"; + ft5406: ts@38 { compatible = "edt,edt-ft5506"; reg = <0x38>; @@ -37,13 +39,6 @@ }; }; - frag13: fragment@13 { - target = <&i2c_csi_dsi>; - i2cbus: __overlay__ { - status = "okay"; - }; - }; - __overrides__ { sizex = <&ft5406>,"touchscreen-size-x:0"; sizey = <&ft5406>,"touchscreen-size-y:0"; --- a/arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts +++ b/arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts @@ -53,7 +53,7 @@ }; fragment@3 { - target = <&i2s>; + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; @@ -63,7 +63,7 @@ target = <&sound>; __overlay__ { compatible = "fe-pi,fe-pi-audio"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_consumer>; status = "okay"; }; }; --- a/arch/arm/boot/dts/overlays/ghost-amp-overlay.dts +++ b/arch/arm/boot/dts/overlays/ghost-amp-overlay.dts @@ -14,7 +14,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -43,7 +43,7 @@ target = <&sound>; iqaudio_dac: __overlay__ { compatible = "iqaudio,iqaudio-dac"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; mute-gpios = <& 0 0>; iqaudio-dac,auto-mute-amp; status = "okay"; --- a/arch/arm/boot/dts/overlays/googlevoicehat-soundcard-overlay.dts +++ b/arch/arm/boot/dts/overlays/googlevoicehat-soundcard-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -42,7 +42,7 @@ target = <&sound>; __overlay__ { compatible = "googlevoicehat,googlevoicehat-soundcard"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; status = "okay"; }; }; --- a/arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dts +++ b/arch/arm/boot/dts/overlays/hifiberry-amp-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -32,7 +32,7 @@ target = <&sound>; __overlay__ { compatible = "hifiberry,hifiberry-amp"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; status = "okay"; }; }; --- a/arch/arm/boot/dts/overlays/hifiberry-amp100-overlay.dts +++ b/arch/arm/boot/dts/overlays/hifiberry-amp100-overlay.dts @@ -15,8 +15,8 @@ }; }; - fragment@1 { - target = <&i2s>; + frag1: fragment@1 { + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; @@ -46,7 +46,7 @@ target = <&sound>; hifiberry_dacplus: __overlay__ { compatible = "hifiberry,hifiberry-dacplus"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_consumer>; status = "okay"; mute-gpio = <&gpio 4 0>; reset-gpio = <&gpio 17 0x11>; @@ -56,7 +56,10 @@ __overrides__ { 24db_digital_gain = <&hifiberry_dacplus>,"hifiberry,24db_digital_gain?"; - slave = <&hifiberry_dacplus>,"hifiberry-dacplus,slave?"; + slave = <&hifiberry_dacplus>,"hifiberry-dacplus,slave?", + <&frag1>,"target:0=",<&i2s_clk_producer>, + <&hifiberry_dacplus>,"i2s-controller:0=",<&i2s_clk_producer>; + leds_off = <&hifiberry_dacplus>,"hifiberry-dacplus,leds_off?"; mute_ext_ctl = <&hifiberry_dacplus>,"hifiberry-dacplus,mute_ext_ctl:0"; auto_mute = <&hifiberry_dacplus>,"hifiberry-dacplus,auto_mute?"; --- a/arch/arm/boot/dts/overlays/hifiberry-amp3-overlay.dts +++ b/arch/arm/boot/dts/overlays/hifiberry-amp3-overlay.dts @@ -10,7 +10,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -50,7 +50,7 @@ target = <&sound>; __overlay__ { compatible = "hifiberry,hifiberry-amp3"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; status = "okay"; }; }; --- a/arch/arm/boot/dts/overlays/hifiberry-dac-overlay.dts +++ b/arch/arm/boot/dts/overlays/hifiberry-dac-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -27,7 +27,7 @@ target = <&sound>; __overlay__ { compatible = "hifiberry,hifiberry-dac"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; status = "okay"; }; }; --- a/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts +++ b/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts @@ -15,8 +15,8 @@ }; }; - fragment@1 { - target = <&i2s>; + frag1: fragment@1 { + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; @@ -51,7 +51,7 @@ target = <&sound>; hifiberry_dacplus: __overlay__ { compatible = "hifiberry,hifiberry-dacplus"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_consumer>; status = "okay"; }; }; @@ -59,7 +59,10 @@ __overrides__ { 24db_digital_gain = <&hifiberry_dacplus>,"hifiberry,24db_digital_gain?"; - slave = <&hifiberry_dacplus>,"hifiberry-dacplus,slave?"; + slave = <&hifiberry_dacplus>,"hifiberry-dacplus,slave?", + <&frag1>,"target:0=",<&i2s_clk_producer>, + <&hifiberry_dacplus>,"i2s-controller:0=",<&i2s_clk_producer>; + leds_off = <&hifiberry_dacplus>,"hifiberry-dacplus,leds_off?"; }; }; --- a/arch/arm/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts +++ b/arch/arm/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts @@ -15,8 +15,8 @@ }; }; - fragment@1 { - target = <&i2s>; + frag1: fragment@1 { + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; @@ -58,7 +58,7 @@ target = <&sound>; hifiberry_dacplusadc: __overlay__ { compatible = "hifiberry,hifiberry-dacplusadc"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_consumer>; status = "okay"; }; }; @@ -66,7 +66,9 @@ __overrides__ { 24db_digital_gain = <&hifiberry_dacplusadc>,"hifiberry,24db_digital_gain?"; - slave = <&hifiberry_dacplusadc>,"hifiberry-dacplusadc,slave?"; + slave = <&hifiberry_dacplusadc>,"hifiberry-dacplusadc,slave?", + <&frag1>,"target:0=",<&i2s_clk_producer>, + <&hifiberry_dacplusadc>,"i2s-controller:0=",<&i2s_clk_producer>; leds_off = <&hifiberry_dacplusadc>,"hifiberry-dacplusadc,leds_off?"; }; }; --- a/arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts +++ b/arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts @@ -15,8 +15,8 @@ }; }; - fragment@1 { - target = <&i2s>; + frag1: fragment@1 { + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; @@ -56,7 +56,7 @@ hifiberry_dacplusadcpro: __overlay__ { compatible = "hifiberry,hifiberry-dacplusadcpro"; audio-codec = <&hb_dac &hb_adc>; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_consumer>; status = "okay"; }; }; @@ -64,7 +64,9 @@ __overrides__ { 24db_digital_gain = <&hifiberry_dacplusadcpro>,"hifiberry-dacplusadcpro,24db_digital_gain?"; - slave = <&hifiberry_dacplusadcpro>,"hifiberry-dacplusadcpro,slave?"; + slave = <&hifiberry_dacplusadcpro>,"hifiberry-dacplusadcpro,slave?", + <&frag1>,"target:0=",<&i2s_clk_producer>, + <&hifiberry_dacplusadcpro>,"i2s-controller:0=",<&i2s_clk_producer>; leds_off = <&hifiberry_dacplusadcpro>,"hifiberry-dacplusadcpro,leds_off?"; }; }; --- a/arch/arm/boot/dts/overlays/hifiberry-dacplusdsp-overlay.dts +++ b/arch/arm/boot/dts/overlays/hifiberry-dacplusdsp-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -27,7 +27,7 @@ target = <&sound>; __overlay__ { compatible = "hifiberrydacplusdsp,hifiberrydacplusdsp-soundcard"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; status = "okay"; }; }; --- a/arch/arm/boot/dts/overlays/hifiberry-dacplushd-overlay.dts +++ b/arch/arm/boot/dts/overlays/hifiberry-dacplushd-overlay.dts @@ -8,7 +8,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; @@ -84,7 +84,7 @@ target = <&sound>; __overlay__ { compatible = "hifiberry,hifiberry-dacplushd"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_consumer>; clocks = <&pll 0>; reset-gpio = <&gpio 16 GPIO_ACTIVE_LOW>; status = "okay"; --- a/arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts +++ b/arch/arm/boot/dts/overlays/hifiberry-digi-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; @@ -34,7 +34,7 @@ target = <&sound>; __overlay__ { compatible = "hifiberry,hifiberry-digi"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_consumer>; status = "okay"; }; }; --- a/arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts +++ b/arch/arm/boot/dts/overlays/hifiberry-digi-pro-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; @@ -34,7 +34,7 @@ target = <&sound>; __overlay__ { compatible = "hifiberry,hifiberry-digi"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_consumer>; status = "okay"; clock44-gpio = <&gpio 5 0>; clock48-gpio = <&gpio 6 0>; --- a/arch/arm/boot/dts/overlays/i-sabre-q2m-overlay.dts +++ b/arch/arm/boot/dts/overlays/i-sabre-q2m-overlay.dts @@ -9,13 +9,13 @@ target = <&sound>; frag0: __overlay__ { compatible = "audiophonics,i-sabre-q2m"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; status = "okay"; }; }; fragment@1 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; --- /dev/null +++ b/arch/arm/boot/dts/overlays/i2c0-pi5-overlay.dts @@ -0,0 +1,34 @@ +/dts-v1/; +/plugin/; + +/{ + compatible = "brcm,bcm2712"; + + fragment@0 { + target = <&i2c0>; + frag0: __overlay__ { + status = "okay"; + clock-frequency = <100000>; + }; + }; + + fragment@1 { + target = <&frag0>; + __overlay__ { + pinctrl-0 = <&rp1_i2c0_0_1>; + }; + }; + + fragment@2 { + target = <&frag0>; + __dormant__ { + pinctrl-0 = <&rp1_i2c0_8_9>; + }; + }; + + __overrides__ { + pins_0_1 = <0>,"+1-2"; + pins_8_9 = <0>,"-1+2"; + baudrate = <&frag0>, "clock-frequency:0"; + }; +}; --- /dev/null +++ b/arch/arm/boot/dts/overlays/i2c1-pi5-overlay.dts @@ -0,0 +1,34 @@ +/dts-v1/; +/plugin/; + +/{ + compatible = "brcm,bcm2712"; + + fragment@0 { + target = <&i2c1>; + frag0: __overlay__ { + status = "okay"; + clock-frequency = <100000>; + }; + }; + + fragment@1 { + target = <&frag0>; + __overlay__ { + pinctrl-0 = <&rp1_i2c1_2_3>; + }; + }; + + fragment@2 { + target = <&frag0>; + __dormant__ { + pinctrl-0 = <&rp1_i2c1_10_11>; + }; + }; + + __overrides__ { + pins_2_3 = <0>,"+1-2"; + pins_10_11 = <0>,"-1+2"; + baudrate = <&frag0>, "clock-frequency:0"; + }; +}; --- /dev/null +++ b/arch/arm/boot/dts/overlays/i2c2-pi5-overlay.dts @@ -0,0 +1,21 @@ +/dts-v1/; +/plugin/; + +/{ + compatible = "brcm,bcm2712"; + + fragment@0 { + target = <&i2c2>; + frag0: __overlay__ { + status = "okay"; + clock-frequency = <100000>; + pinctrl-0 = <&rp1_i2c2_4_5>; + }; + }; + + __overrides__ { + pins_4_5 = <&frag0>,"pinctrl-0:0=", <&rp1_i2c2_4_5>; + pins_12_13 = <&frag0>,"pinctrl-0:0=", <&rp1_i2c2_12_13>; + baudrate = <&frag0>, "clock-frequency:0"; + }; +}; --- /dev/null +++ b/arch/arm/boot/dts/overlays/i2c3-pi5-overlay.dts @@ -0,0 +1,22 @@ +/dts-v1/; +/plugin/; + +/{ + compatible = "brcm,bcm2712"; + + fragment@0 { + target = <&i2c3>; + frag0: __overlay__ { + status = "okay"; + clock-frequency = <100000>; + pinctrl-0 = <&rp1_i2c3_6_7>; + }; + }; + + __overrides__ { + pins_6_7 = <&frag0>,"pinctrl-0:0=", <&rp1_i2c3_6_7>; + pins_14_15 = <&frag0>,"pinctrl-0:0=", <&rp1_i2c3_14_15>; + pins_22_23 = <&frag0>,"pinctrl-0:0=", <&rp1_i2c3_22_23>; + baudrate = <&frag0>, "clock-frequency:0"; + }; +}; --- a/arch/arm/boot/dts/overlays/i2s-dac-overlay.dts +++ b/arch/arm/boot/dts/overlays/i2s-dac-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -27,7 +27,7 @@ target = <&sound>; __overlay__ { compatible = "rpi,rpi-dac"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; status = "okay"; }; }; --- a/arch/arm/boot/dts/overlays/imx219-overlay.dts +++ b/arch/arm/boot/dts/overlays/imx219-overlay.dts @@ -69,7 +69,7 @@ rotation = <&cam_node>,"rotation:0"; orientation = <&cam_node>,"orientation:0"; media-controller = <&csi>,"brcm,media-controller?"; - cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>, + cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>, <&csi_frag>, "target:0=",<&csi0>, <&clk_frag>, "target:0=",<&cam0_clk>, <&cam_node>, "clocks:0=",<&cam0_clk>, --- a/arch/arm/boot/dts/overlays/imx258-overlay.dts +++ b/arch/arm/boot/dts/overlays/imx258-overlay.dts @@ -110,7 +110,7 @@ rotation = <&cam_node>,"rotation:0"; orientation = <&cam_node>,"orientation:0"; media-controller = <&csi>,"brcm,media-controller?"; - cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>, + cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>, <&csi_frag>, "target:0=",<&csi0>, <&clk_frag>, "target:0=",<&cam0_clk>, <®_frag>, "target:0=",<&cam0_reg>, --- a/arch/arm/boot/dts/overlays/imx290_327-overlay.dtsi +++ b/arch/arm/boot/dts/overlays/imx290_327-overlay.dtsi @@ -95,7 +95,7 @@ rotation = <&cam_node>,"rotation:0"; orientation = <&cam_node>,"orientation:0"; media-controller = <&csi>,"brcm,media-controller?"; - cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>, + cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>, <&csi_frag>, "target:0=",<&csi0>, <&clk_frag>, "target:0=",<&cam0_clk>, <&cam_node>, "clocks:0=",<&cam0_clk>, --- a/arch/arm/boot/dts/overlays/imx296-overlay.dts +++ b/arch/arm/boot/dts/overlays/imx296-overlay.dts @@ -94,7 +94,7 @@ rotation = <&imx296>,"rotation:0"; orientation = <&imx296>,"orientation:0"; media-controller = <&csi>,"brcm,media-controller?"; - cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>, + cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>, <&csi_frag>, "target:0=",<&csi0>, <&clk_frag>, "target:0=",<&cam0_clk>, <&imx296>, "clocks:0=",<&cam0_clk>, --- a/arch/arm/boot/dts/overlays/imx477_378-overlay.dtsi +++ b/arch/arm/boot/dts/overlays/imx477_378-overlay.dtsi @@ -65,7 +65,7 @@ rotation = <&cam_node>,"rotation:0"; orientation = <&cam_node>,"orientation:0"; media-controller = <&csi>,"brcm,media-controller?"; - cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>, + cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>, <&csi_frag>, "target:0=",<&csi0>, <&clk_frag>, "target:0=",<&cam0_clk>, <®_frag>, "target:0=",<&cam0_reg>, --- a/arch/arm/boot/dts/overlays/imx519-overlay.dts +++ b/arch/arm/boot/dts/overlays/imx519-overlay.dts @@ -69,7 +69,7 @@ rotation = <&cam_node>,"rotation:0"; orientation = <&cam_node>,"orientation:0"; media-controller = <&csi>,"brcm,media-controller?"; - cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>, + cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>, <&csi_frag>, "target:0=",<&csi0>, <&clk_frag>, "target:0=",<&cam0_clk>, <&cam_node>, "clocks:0=",<&cam0_clk>, --- a/arch/arm/boot/dts/overlays/imx708-overlay.dts +++ b/arch/arm/boot/dts/overlays/imx708-overlay.dts @@ -79,12 +79,12 @@ rotation = <&cam_node>,"rotation:0"; orientation = <&cam_node>,"orientation:0"; media-controller = <&csi>,"brcm,media-controller?"; - cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>, + cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>, <&csi_frag>, "target:0=",<&csi0>, <&clk_frag>, "target:0=",<&cam0_clk>, <®_frag>, "target:0=",<&cam0_reg>, <&cam_node>, "clocks:0=",<&cam0_clk>, - <&cam_node>, "VANA1-supply:0=",<&cam0_reg>, + <&cam_node>, "vana1-supply:0=",<&cam0_reg>, <&vcm_node>, "VDD-supply:0=",<&cam0_reg>; vcm = <&vcm_node>, "status", <0>, "=4"; --- a/arch/arm/boot/dts/overlays/iqaudio-codec-overlay.dts +++ b/arch/arm/boot/dts/overlays/iqaudio-codec-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; @@ -32,7 +32,7 @@ target = <&sound>; iqaudio_dac: __overlay__ { compatible = "iqaudio,iqaudio-codec"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_consumer>; status = "okay"; }; }; --- a/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts +++ b/arch/arm/boot/dts/overlays/iqaudio-dac-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -35,7 +35,7 @@ target = <&sound>; frag2: __overlay__ { compatible = "iqaudio,iqaudio-dac"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; status = "okay"; }; }; --- a/arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts +++ b/arch/arm/boot/dts/overlays/iqaudio-dacplus-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -35,7 +35,7 @@ target = <&sound>; iqaudio_dac: __overlay__ { compatible = "iqaudio,iqaudio-dac"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; mute-gpios = <&gpio 22 0>; status = "okay"; }; --- a/arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts +++ b/arch/arm/boot/dts/overlays/iqaudio-digi-wm8804-audio-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; @@ -34,7 +34,7 @@ target = <&sound>; wm8804_digi: __overlay__ { compatible = "iqaudio,wm8804-digi"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_consumer>; status = "okay"; }; }; --- a/arch/arm/boot/dts/overlays/irs1125-overlay.dts +++ b/arch/arm/boot/dts/overlays/irs1125-overlay.dts @@ -82,7 +82,7 @@ __overrides__ { media-controller = <&csi>,"brcm,media-controller?"; - cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>, + cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>, <&csi_frag>, "target:0=",<&csi0>, <&clk_frag>, "target:0=",<&cam0_clk>, <&irs1125>, "clocks:0=",<&cam0_clk>; --- a/arch/arm/boot/dts/overlays/justboom-both-overlay.dts +++ b/arch/arm/boot/dts/overlays/justboom-both-overlay.dts @@ -7,7 +7,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; @@ -54,7 +54,7 @@ target = <&sound>; frag3: __overlay__ { compatible = "justboom,justboom-both"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_consumer>; status = "okay"; }; }; --- a/arch/arm/boot/dts/overlays/justboom-dac-overlay.dts +++ b/arch/arm/boot/dts/overlays/justboom-dac-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -35,7 +35,7 @@ target = <&sound>; frag2: __overlay__ { compatible = "justboom,justboom-dac"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; status = "okay"; }; }; --- a/arch/arm/boot/dts/overlays/justboom-digi-overlay.dts +++ b/arch/arm/boot/dts/overlays/justboom-digi-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; @@ -34,7 +34,7 @@ target = <&sound>; __overlay__ { compatible = "justboom,justboom-digi"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_consumer>; status = "okay"; }; }; --- a/arch/arm/boot/dts/overlays/max98357a-overlay.dts +++ b/arch/arm/boot/dts/overlays/max98357a-overlay.dts @@ -12,7 +12,7 @@ /* Enable I2S */ fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -52,7 +52,7 @@ simple-audio-card,name = "MAX98357A"; status = "okay"; simple-audio-card,cpu { - sound-dai = <&i2s>; + sound-dai = <&i2s_clk_producer>; }; simple-audio-card,codec { sound-dai = <&max98357a_dac>; @@ -69,7 +69,7 @@ simple-audio-card,name = "MAX98357A"; status = "okay"; simple-audio-card,cpu { - sound-dai = <&i2s>; + sound-dai = <&i2s_clk_producer>; }; simple-audio-card,codec { sound-dai = <&max98357a_nsd>; --- a/arch/arm/boot/dts/overlays/mbed-dac-overlay.dts +++ b/arch/arm/boot/dts/overlays/mbed-dac-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -32,7 +32,7 @@ target = <&sound>; __overlay__ { compatible = "simple-audio-card"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; status = "okay"; simple-audio-card,name = "mbed-DAC"; @@ -52,7 +52,7 @@ simple-audio-card,format = "i2s"; simple-audio-card,cpu { - sound-dai = <&i2s>; + sound-dai = <&i2s_clk_producer>; }; sound_master: simple-audio-card,codec { --- a/arch/arm/boot/dts/overlays/merus-amp-overlay.dts +++ b/arch/arm/boot/dts/overlays/merus-amp-overlay.dts @@ -9,7 +9,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -52,7 +52,7 @@ target = <&sound>; __overlay__ { compatible = "merus,merus-amp"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; status = "okay"; }; }; --- /dev/null +++ b/arch/arm/boot/dts/overlays/midi-uart0-pi5-overlay.dts @@ -0,0 +1,35 @@ +/dts-v1/; +/plugin/; + +#include + +/* + * Fake a higher clock rate to get a larger divisor, and thereby a lower + * baudrate. The real clock is 100MHz, which we scale so that requesting + * 38.4kHz results in an actual 31.25kHz. + * + * 100000000*38400/31250 = 122880000 + */ + +/{ + compatible = "brcm,bcm2712"; + + fragment@0 { + target-path = "/"; + __overlay__ { + midi_clk: midi_clk0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "uart0_pclk"; + clock-frequency = <122880000>; + }; + }; + }; + + fragment@1 { + target = <&uart0>; + __overlay__ { + clocks = <&midi_clk &rp1_clocks RP1_PLL_SYS_PRI_PH>; + }; + }; +}; --- /dev/null +++ b/arch/arm/boot/dts/overlays/midi-uart1-pi5-overlay.dts @@ -0,0 +1,35 @@ +/dts-v1/; +/plugin/; + +#include + +/* + * Fake a higher clock rate to get a larger divisor, and thereby a lower + * baudrate. The real clock is 100MHz, which we scale so that requesting + * 38.4kHz results in an actual 31.25kHz. + * + * 100000000*38400/31250 = 122880000 + */ + +/{ + compatible = "brcm,bcm2712"; + + fragment@0 { + target-path = "/"; + __overlay__ { + midi_clk: midi_clk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "uart1_pclk"; + clock-frequency = <122880000>; + }; + }; + }; + + fragment@1 { + target = <&uart1>; + __overlay__ { + clocks = <&midi_clk &rp1_clocks RP1_PLL_SYS_PRI_PH>; + }; + }; +}; --- /dev/null +++ b/arch/arm/boot/dts/overlays/midi-uart2-pi5-overlay.dts @@ -0,0 +1,35 @@ +/dts-v1/; +/plugin/; + +#include + +/* + * Fake a higher clock rate to get a larger divisor, and thereby a lower + * baudrate. The real clock is 100MHz, which we scale so that requesting + * 38.4kHz results in an actual 31.25kHz. + * + * 100000000*38400/31250 = 122880000 + */ + +/{ + compatible = "brcm,bcm2712"; + + fragment@0 { + target-path = "/"; + __overlay__ { + midi_clk: midi_clk2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "uart2_pclk"; + clock-frequency = <122880000>; + }; + }; + }; + + fragment@1 { + target = <&uart2>; + __overlay__ { + clocks = <&midi_clk &rp1_clocks RP1_PLL_SYS_PRI_PH>; + }; + }; +}; --- /dev/null +++ b/arch/arm/boot/dts/overlays/midi-uart3-pi5-overlay.dts @@ -0,0 +1,35 @@ +/dts-v1/; +/plugin/; + +#include + +/* + * Fake a higher clock rate to get a larger divisor, and thereby a lower + * baudrate. The real clock is 100MHz, which we scale so that requesting + * 38.4kHz results in an actual 31.25kHz. + * + * 100000000*38400/31250 = 122880000 + */ + +/{ + compatible = "brcm,bcm2712"; + + fragment@0 { + target-path = "/"; + __overlay__ { + midi_clk: midi_clk3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "uart3_pclk"; + clock-frequency = <122880000>; + }; + }; + }; + + fragment@1 { + target = <&uart3>; + __overlay__ { + clocks = <&midi_clk &rp1_clocks RP1_PLL_SYS_PRI_PH>; + }; + }; +}; --- /dev/null +++ b/arch/arm/boot/dts/overlays/midi-uart4-pi5-overlay.dts @@ -0,0 +1,35 @@ +/dts-v1/; +/plugin/; + +#include + +/* + * Fake a higher clock rate to get a larger divisor, and thereby a lower + * baudrate. The real clock is 100MHz, which we scale so that requesting + * 38.4kHz results in an actual 31.25kHz. + * + * 100000000*38400/31250 = 122880000 + */ + +/{ + compatible = "brcm,bcm2712"; + + fragment@0 { + target-path = "/"; + __overlay__ { + midi_clk: midi_clk4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "uart4_pclk"; + clock-frequency = <122880000>; + }; + }; + }; + + fragment@1 { + target = <&uart4>; + __overlay__ { + clocks = <&midi_clk &rp1_clocks RP1_PLL_SYS_PRI_PH>; + }; + }; +}; --- a/arch/arm/boot/dts/overlays/ov2311-overlay.dts +++ b/arch/arm/boot/dts/overlays/ov2311-overlay.dts @@ -60,7 +60,7 @@ rotation = <&cam_node>,"rotation:0"; orientation = <&cam_node>,"orientation:0"; media-controller = <&csi>,"brcm,media-controller?"; - cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>, + cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>, <&csi_frag>, "target:0=",<&csi0>, <&clk_frag>, "target:0=",<&cam0_clk>, <&cam_node>, "clocks:0=",<&cam0_clk>, --- a/arch/arm/boot/dts/overlays/ov5647-overlay.dts +++ b/arch/arm/boot/dts/overlays/ov5647-overlay.dts @@ -72,7 +72,7 @@ rotation = <&cam_node>,"rotation:0"; orientation = <&cam_node>,"orientation:0"; media-controller = <&csi>,"brcm,media-controller?"; - cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>, + cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>, <&csi_frag>, "target:0=",<&csi0>, <®_frag>, "target:0=",<&cam0_reg>, <&clk_frag>, "target:0=",<&cam0_clk>, --- a/arch/arm/boot/dts/overlays/ov7251-overlay.dts +++ b/arch/arm/boot/dts/overlays/ov7251-overlay.dts @@ -60,7 +60,7 @@ rotation = <&cam_node>,"rotation:0"; orientation = <&cam_node>,"orientation:0"; media-controller = <&csi>,"brcm,media-controller?"; - cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>, + cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>, <&csi_frag>, "target:0=",<&csi0>, <&clk_frag>, "target:0=",<&cam0_clk>, <&cam_node>, "clocks:0=",<&cam0_clk>, --- a/arch/arm/boot/dts/overlays/ov9281-overlay.dts +++ b/arch/arm/boot/dts/overlays/ov9281-overlay.dts @@ -61,7 +61,7 @@ rotation = <&cam_node>,"rotation:0"; orientation = <&cam_node>,"orientation:0"; media-controller = <&csi>,"brcm,media-controller?"; - cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>, + cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>, <&csi_frag>, "target:0=",<&csi0>, <&clk_frag>, "target:0=",<&cam0_clk>, <&cam_node>, "clocks:0=",<&cam0_clk>, --- a/arch/arm/boot/dts/overlays/overlay_map.dts +++ b/arch/arm/boot/dts/overlays/overlay_map.dts @@ -1,32 +1,100 @@ /dts-v1/; / { + audremap { + bcm2835; + bcm2711; + }; + + balena-fin { + bcm2835; + bcm2711; + }; + bmp085_i2c-sensor { deprecated = "use i2c-sensor,bmp085"; }; + cm-swap-i2c0 { + bcm2835; + bcm2711; + }; + cutiepi-panel { bcm2711; }; + disable-bt { + bcm2835; + bcm2711; + bcm2712 = "disable-bt-pi5"; + }; + + disable-bt-pi5 { + bcm2712; + }; + disable-emmc2 { bcm2711; }; + disable-wifi { + bcm2835; + bcm2711; + bcm2712 = "disable-wifi-pi5"; + }; + + disable-wifi-pi5 { + bcm2712; + }; + highperi { bcm2711; }; + i2c0 { + bcm2835; + bcm2711; + bcm2712 = "i2c0-pi5"; + }; + i2c0-bcm2708 { deprecated = "use i2c0"; }; + i2c0-pi5 { + bcm2712; + }; + + i2c1 { + bcm2835; + bcm2711; + bcm2712 = "i2c1-pi5"; + }; + i2c1-bcm2708 { deprecated = "use i2c1"; }; + i2c1-pi5 { + bcm2712; + }; + + i2c2 { + bcm2712 = "i2c2-pi5"; + }; + + i2c2-pi5 { + bcm2712; + }; + i2c3 { bcm2711; + bcm2712 = "i2c3-pi5"; + }; + + i2c3-pi5 { + bcm2712; }; i2c4 { @@ -41,26 +109,76 @@ bcm2711; }; + i2s-gpio28-31 { + bcm2835; + bcm2711; + }; + lirc-rpi { deprecated = "use gpio-ir"; }; + midi-uart0 { + bcm2835; + bcm2711; + bcm2712 = "midi-uart0-pi5"; + }; + + midi-uart0-pi5 { + bcm2712; + }; + + midi-uart1 { + bcm2835; + bcm2711; + bcm2712 = "midi-uart1-pi5"; + }; + + midi-uart1-pi5 { + bcm2712; + }; + midi-uart2 { bcm2711; + bcm2712 = "midi-uart2-pi5"; + }; + + midi-uart2-pi5 { + bcm2712; }; midi-uart3 { bcm2711; + bcm2712 = "midi-uart3-pi5"; + }; + + midi-uart3-pi5 { + bcm2712; }; midi-uart4 { bcm2711; + bcm2712 = "midi-uart4-pi5"; + }; + + midi-uart4-pi5 { + bcm2712; }; midi-uart5 { bcm2711; }; + miniuart-bt { + bcm2835; + bcm2711; + }; + + mmc { + bcm2835; + bcm2711; + }; + mpu6050 { deprecated = "use i2c-sensor,mpu6050"; }; @@ -118,6 +236,16 @@ deprecated = "no longer necessary"; }; + sdhost { + bcm2835; + bcm2711; + }; + + sdio { + bcm2835; + bcm2711; + }; + sdio-1bit { deprecated = "use sdio,bus_width=1,gpios_22_25"; }; @@ -126,6 +254,21 @@ deprecated = "use 'dtparam=sd_poll_once' etc."; }; + smi { + bcm2835; + bcm2711; + }; + + smi-dev { + bcm2835; + bcm2711; + }; + + smi-nand { + bcm2835; + bcm2711; + }; + spi0-cs { renamed = "spi0-2cs"; }; @@ -134,12 +277,42 @@ deprecated = "no longer necessary"; }; + spi2-1cs { + bcm2835; + bcm2711; + bcm2712 = "spi2-1cs-pi5"; + }; + + spi2-1cs-pi5 { + bcm2712; + }; + + spi2-2cs { + bcm2835; + bcm2711; + bcm2712 = "spi2-2cs-pi5"; + }; + + spi2-2cs-pi5 { + bcm2712; + }; + spi3-1cs { bcm2711; + bcm2712 = "spi3-1cs-pi5"; + }; + + spi3-1cs-pi5 { + bcm2712; }; spi3-2cs { bcm2711; + bcm2712 = "spi3-2cs-pi5"; + }; + + spi3-2cs-pi5 { + bcm2712; }; spi4-1cs { @@ -152,10 +325,20 @@ spi5-1cs { bcm2711; + bcm2712 = "spi5-1cs-pi5"; + }; + + spi5-1cs-pi5 { + bcm2712; }; spi5-2cs { bcm2711; + bcm2712 = "spi5-2cs-pi5"; + }; + + spi5-2cs-pi5 { + bcm2712; }; spi6-1cs { @@ -166,16 +349,51 @@ bcm2711; }; + uart0 { + bcm2835; + bcm2711; + bcm2712 = "uart0-pi5"; + }; + + uart0-pi5 { + bcm2712; + }; + + uart1 { + bcm2835; + bcm2711; + bcm2712 = "uart1-pi5"; + }; + + uart1-pi5 { + bcm2712; + }; + uart2 { bcm2711; + bcm2712 = "uart2-pi5"; + }; + + uart2-pi5 { + bcm2712; }; uart3 { bcm2711; + bcm2712 = "uart3-pi5"; + }; + + uart3-pi5 { + bcm2712; }; uart4 { bcm2711; + bcm2712 = "uart4-pi5"; + }; + + uart4-pi5 { + bcm2712; }; uart5 { @@ -198,10 +416,12 @@ vc4-fkms-v3d { bcm2835; bcm2711 = "vc4-fkms-v3d-pi4"; + bcm2712 = "vc4-fkms-v3d-pi4"; }; vc4-fkms-v3d-pi4 { bcm2711; + bcm2712; }; vc4-kms-dpi-at056tn53v1 { @@ -211,10 +431,16 @@ vc4-kms-v3d { bcm2835; bcm2711 = "vc4-kms-v3d-pi4"; + bcm2712 = "vc4-kms-v3d-pi5"; }; vc4-kms-v3d-pi4 { bcm2711; + bcm2712 = "vc4-kms-v3d-pi5"; + }; + + vc4-kms-v3d-pi5 { + bcm2712; }; vl805 { --- a/arch/arm/boot/dts/overlays/pibell-overlay.dts +++ b/arch/arm/boot/dts/overlays/pibell-overlay.dts @@ -24,7 +24,7 @@ }; fragment@1 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { #sound-dai-cells = <0>; status = "okay"; @@ -43,7 +43,7 @@ format = "i2s"; r_cpu_dai: cpu { - sound-dai = <&i2s>; + sound-dai = <&i2s_clk_producer>; /* example TDM slot configuration dai-tdm-slot-num = <2>; @@ -60,7 +60,7 @@ format = "i2s"; p_cpu_dai: cpu { - sound-dai = <&i2s>; + sound-dai = <&i2s_clk_producer>; /* example TDM slot configuration dai-tdm-slot-num = <2>; --- a/arch/arm/boot/dts/overlays/pifi-40-overlay.dts +++ b/arch/arm/boot/dts/overlays/pifi-40-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -42,7 +42,7 @@ pifi_40: __overlay__ { compatible = "pifi,pifi-40"; audio-codec = <&tas5711l &tas5711r>; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; pdn-gpios = <&gpio 23 1>; status = "okay"; }; --- a/arch/arm/boot/dts/overlays/pifi-dac-hd-overlay.dts +++ b/arch/arm/boot/dts/overlays/pifi-dac-hd-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -38,7 +38,7 @@ simple-audio-card,dai-link@1 { format = "i2s"; cpu { - sound-dai = <&i2s>; + sound-dai = <&i2s_clk_producer>; }; codec { sound-dai = <&pcm5142>; --- a/arch/arm/boot/dts/overlays/pifi-dac-zero-overlay.dts +++ b/arch/arm/boot/dts/overlays/pifi-dac-zero-overlay.dts @@ -16,7 +16,7 @@ format = "i2s"; cpu { - sound-dai = <&i2s>; + sound-dai = <&i2s_clk_producer>; dai-tdm-slot-num = <2>; dai-tdm-slot-width = <32>; }; @@ -40,7 +40,7 @@ }; fragment@2 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { #sound-dai-cells = <0>; status = "okay"; --- a/arch/arm/boot/dts/overlays/pifi-mini-210-overlay.dts +++ b/arch/arm/boot/dts/overlays/pifi-mini-210-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -34,7 +34,7 @@ target = <&sound>; __overlay__ { compatible = "pifi,pifi-mini-210"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; status = "okay"; }; --- a/arch/arm/boot/dts/overlays/pisound-overlay.dts +++ b/arch/arm/boot/dts/overlays/pisound-overlay.dts @@ -75,7 +75,7 @@ target = <&sound>; __overlay__ { compatible = "blokaslabs,pisound"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_consumer>; status = "okay"; pinctrl-names = "default"; @@ -108,7 +108,7 @@ }; fragment@7 { - target = <&i2s>; + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; --- a/arch/arm/boot/dts/overlays/proto-codec-overlay.dts +++ b/arch/arm/boot/dts/overlays/proto-codec-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; @@ -32,7 +32,7 @@ target = <&sound>; __overlay__ { compatible = "rpi,rpi-proto"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_consumer>; status = "okay"; }; }; --- a/arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts +++ b/arch/arm/boot/dts/overlays/rra-digidac1-wm8741-audio-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; @@ -42,7 +42,7 @@ target = <&sound>; __overlay__ { compatible = "rra,digidac1-soundcard"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_consumer>; status = "okay"; }; }; --- /dev/null +++ b/arch/arm/boot/dts/overlays/spi2-1cs-pi5-overlay.dts @@ -0,0 +1,33 @@ +/dts-v1/; +/plugin/; + + +/ { + compatible = "brcm,bcm2712"; + + fragment@0 { + target = <&spi2>; + frag1: __overlay__ { + /* needed to avoid dtc warning */ + #address-cells = <1>; + #size-cells = <0>; + + cs-gpios = <&gpio 0 1>; + status = "okay"; + + spidev2_0: spidev@0 { + compatible = "spidev"; + reg = <0>; /* CE0 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <125000000>; + status = "okay"; + }; + }; + }; + + __overrides__ { + cs0_pin = <&frag1>,"cs-gpios:4"; + cs0_spidev = <&spidev2_0>,"status"; + }; +}; --- /dev/null +++ b/arch/arm/boot/dts/overlays/spi2-2cs-pi5-overlay.dts @@ -0,0 +1,44 @@ +/dts-v1/; +/plugin/; + + +/ { + compatible = "brcm,bcm2712"; + + fragment@0 { + target = <&spi2>; + frag1: __overlay__ { + /* needed to avoid dtc warning */ + #address-cells = <1>; + #size-cells = <0>; + + cs-gpios = <&gpio 0 1>, <&gpio 24 1>; + status = "okay"; + + spidev2_0: spidev@0 { + compatible = "spidev"; + reg = <0>; /* CE0 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <125000000>; + status = "okay"; + }; + + spidev2_1: spidev@1 { + compatible = "spidev"; + reg = <1>; /* CE1 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <125000000>; + status = "okay"; + }; + }; + }; + + __overrides__ { + cs0_pin = <&frag1>,"cs-gpios:4"; + cs1_pin = <&frag1>,"cs-gpios:16"; + cs0_spidev = <&spidev2_0>,"status"; + cs1_spidev = <&spidev2_1>,"status"; + }; +}; --- /dev/null +++ b/arch/arm/boot/dts/overlays/spi3-1cs-pi5-overlay.dts @@ -0,0 +1,33 @@ +/dts-v1/; +/plugin/; + + +/ { + compatible = "brcm,bcm2712"; + + fragment@0 { + target = <&spi3>; + frag1: __overlay__ { + /* needed to avoid dtc warning */ + #address-cells = <1>; + #size-cells = <0>; + + cs-gpios = <&gpio 4 1>; + status = "okay"; + + spidev3_0: spidev@0 { + compatible = "spidev"; + reg = <0>; /* CE0 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <125000000>; + status = "okay"; + }; + }; + }; + + __overrides__ { + cs0_pin = <&frag1>,"cs-gpios:4"; + cs0_spidev = <&spidev3_0>,"status"; + }; +}; --- /dev/null +++ b/arch/arm/boot/dts/overlays/spi3-2cs-pi5-overlay.dts @@ -0,0 +1,44 @@ +/dts-v1/; +/plugin/; + + +/ { + compatible = "brcm,bcm2712"; + + fragment@0 { + target = <&spi3>; + frag1: __overlay__ { + /* needed to avoid dtc warning */ + #address-cells = <1>; + #size-cells = <0>; + + cs-gpios = <&gpio 4 1>, <&gpio 25 1>; + status = "okay"; + + spidev3_0: spidev@0 { + compatible = "spidev"; + reg = <0>; /* CE0 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <125000000>; + status = "okay"; + }; + + spidev3_1: spidev@1 { + compatible = "spidev"; + reg = <1>; /* CE1 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <125000000>; + status = "okay"; + }; + }; + }; + + __overrides__ { + cs0_pin = <&frag1>,"cs-gpios:4"; + cs1_pin = <&frag1>,"cs-gpios:16"; + cs0_spidev = <&spidev3_0>,"status"; + cs1_spidev = <&spidev3_1>,"status"; + }; +}; --- /dev/null +++ b/arch/arm/boot/dts/overlays/spi5-1cs-pi5-overlay.dts @@ -0,0 +1,33 @@ +/dts-v1/; +/plugin/; + + +/ { + compatible = "brcm,bcm2712"; + + fragment@0 { + target = <&spi5>; + frag1: __overlay__ { + /* needed to avoid dtc warning */ + #address-cells = <1>; + #size-cells = <0>; + + cs-gpios = <&gpio 12 1>; + status = "okay"; + + spidev5_0: spidev@0 { + compatible = "spidev"; + reg = <0>; /* CE0 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <125000000>; + status = "okay"; + }; + }; + }; + + __overrides__ { + cs0_pin = <&frag1>,"cs-gpios:4"; + cs0_spidev = <&spidev5_0>,"status"; + }; +}; --- /dev/null +++ b/arch/arm/boot/dts/overlays/spi5-2cs-pi5-overlay.dts @@ -0,0 +1,44 @@ +/dts-v1/; +/plugin/; + + +/ { + compatible = "brcm,bcm2712"; + + fragment@0 { + target = <&spi5>; + frag1: __overlay__ { + /* needed to avoid dtc warning */ + #address-cells = <1>; + #size-cells = <0>; + + cs-gpios = <&gpio 12 1>, <&gpio 26 1>; + status = "okay"; + + spidev5_0: spidev@0 { + compatible = "spidev"; + reg = <0>; /* CE0 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <125000000>; + status = "okay"; + }; + + spidev5_1: spidev@1 { + compatible = "spidev"; + reg = <1>; /* CE1 */ + #address-cells = <1>; + #size-cells = <0>; + spi-max-frequency = <125000000>; + status = "okay"; + }; + }; + }; + + __overrides__ { + cs0_pin = <&frag1>,"cs-gpios:4"; + cs1_pin = <&frag1>,"cs-gpios:16"; + cs0_spidev = <&spidev5_0>,"status"; + cs1_spidev = <&spidev5_1>,"status"; + }; +}; --- a/arch/arm/boot/dts/overlays/superaudioboard-overlay.dts +++ b/arch/arm/boot/dts/overlays/superaudioboard-overlay.dts @@ -9,7 +9,7 @@ target = <&sound>; __overlay__ { compatible = "simple-audio-card"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_consumer>; status = "okay"; simple-audio-card,name = "SuperAudioBoard"; @@ -32,7 +32,7 @@ simple-audio-card,frame-master = <&sound_master>; simple-audio-card,cpu { - sound-dai = <&i2s>; + sound-dai = <&i2s_clk_consumer>; dai-tdm-slot-num = <2>; dai-tdm-slot-width = <32>; }; @@ -45,7 +45,7 @@ }; fragment@1 { - target = <&i2s>; + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; --- a/arch/arm/boot/dts/overlays/tc358743-audio-overlay.dts +++ b/arch/arm/boot/dts/overlays/tc358743-audio-overlay.dts @@ -8,7 +8,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; @@ -31,16 +31,16 @@ compatible = "simple-audio-card"; simple-audio-card,format = "i2s"; simple-audio-card,name = "tc358743"; - simple-audio-card,bitclock-master = <&dailink0_slave>; - simple-audio-card,frame-master = <&dailink0_slave>; + simple-audio-card,bitclock-master = <&dailink0_master>; + simple-audio-card,frame-master = <&dailink0_master>; status = "okay"; simple-audio-card,cpu { - sound-dai = <&i2s>; + sound-dai = <&i2s_clk_consumer>; dai-tdm-slot-num = <2>; dai-tdm-slot-width = <32>; }; - dailink0_slave: simple-audio-card,codec { + dailink0_master: simple-audio-card,codec { sound-dai = <&tc358743_codec>; }; }; --- a/arch/arm/boot/dts/overlays/tc358743-overlay.dts +++ b/arch/arm/boot/dts/overlays/tc358743-overlay.dts @@ -101,7 +101,7 @@ 4lane = <0>, "-2+3-7+8"; link-frequency = <&tc358743_0>,"link-frequencies#0"; media-controller = <&csi>,"brcm,media-controller?"; - cam0 = <&i2c_frag>, "target:0=",<&i2c_vc>, + cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>, <&csi_frag>, "target:0=",<&csi0>, <&clk_frag>, "target:0=",<&cam0_clk>, <&tc358743>, "clocks:0=",<&cam0_clk>; --- /dev/null +++ b/arch/arm/boot/dts/overlays/uart0-pi5-overlay.dts @@ -0,0 +1,17 @@ +/dts-v1/; +/plugin/; + +/{ + compatible = "brcm,bcm2712"; + + fragment@0 { + target = <&uart0>; + frag0: __overlay__ { + status = "okay"; + }; + }; + + __overrides__ { + ctsrts = <&frag0>,"pinctrl-0:4=",<&uart0_ctsrts_pins>; + }; +}; --- /dev/null +++ b/arch/arm/boot/dts/overlays/uart1-pi5-overlay.dts @@ -0,0 +1,17 @@ +/dts-v1/; +/plugin/; + +/{ + compatible = "brcm,bcm2712"; + + fragment@0 { + target = <&uart1>; + frag0: __overlay__ { + status = "okay"; + }; + }; + + __overrides__ { + ctsrts = <&frag0>,"pinctrl-0:4=",<&uart1_ctsrts_pins>; + }; +}; --- /dev/null +++ b/arch/arm/boot/dts/overlays/uart2-pi5-overlay.dts @@ -0,0 +1,17 @@ +/dts-v1/; +/plugin/; + +/{ + compatible = "brcm,bcm2712"; + + fragment@0 { + target = <&uart2>; + frag0: __overlay__ { + status = "okay"; + }; + }; + + __overrides__ { + ctsrts = <&frag0>,"pinctrl-0:4=",<&uart2_ctsrts_pins>; + }; +}; --- /dev/null +++ b/arch/arm/boot/dts/overlays/uart3-pi5-overlay.dts @@ -0,0 +1,17 @@ +/dts-v1/; +/plugin/; + +/{ + compatible = "brcm,bcm2712"; + + fragment@0 { + target = <&uart3>; + frag0: __overlay__ { + status = "okay"; + }; + }; + + __overrides__ { + ctsrts = <&frag0>,"pinctrl-0:4=",<&uart3_ctsrts_pins>; + }; +}; --- /dev/null +++ b/arch/arm/boot/dts/overlays/uart4-pi5-overlay.dts @@ -0,0 +1,17 @@ +/dts-v1/; +/plugin/; + +/{ + compatible = "brcm,bcm2712"; + + fragment@0 { + target = <&uart4>; + frag0: __overlay__ { + status = "okay"; + }; + }; + + __overrides__ { + ctsrts = <&frag0>,"pinctrl-0:4=",<&uart4_ctsrts_pins>; + }; +}; --- a/arch/arm/boot/dts/overlays/udrc-overlay.dts +++ b/arch/arm/boot/dts/overlays/udrc-overlay.dts @@ -9,7 +9,7 @@ / { compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { clocks = <&clocks BCM2835_CLOCK_PCM>; clock-names = "pcm"; @@ -71,7 +71,7 @@ target = <&sound>; snd: __overlay__ { compatible = "simple-audio-card"; - i2s-controller = <&i2s>; + i2s-controller = <&i2s_clk_producer>; status = "okay"; simple-audio-card,name = "udrc"; @@ -93,7 +93,7 @@ "Line Out", "LOL"; dailink0_master: simple-audio-card,cpu { - sound-dai = <&i2s>; + sound-dai = <&i2s_clk_producer>; }; simple-audio-card,codec { --- a/arch/arm/boot/dts/overlays/ugreen-dabboard-overlay.dts +++ b/arch/arm/boot/dts/overlays/ugreen-dabboard-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_consumer>; __overlay__ { status = "okay"; }; @@ -29,14 +29,14 @@ compatible = "simple-audio-card"; simple-audio-card,format = "i2s"; simple-audio-card,name = "dabboard"; - simple-audio-card,bitclock-master = <&dailink0_slave>; - simple-audio-card,frame-master = <&dailink0_slave>; + simple-audio-card,bitclock-master = <&dailink0_master>; + simple-audio-card,frame-master = <&dailink0_master>; simple-audio-card,widgets = "Microphone", "Microphone Jack"; status = "okay"; simple-audio-card,cpu { - sound-dai = <&i2s>; + sound-dai = <&i2s_clk_consumer>; }; - dailink0_slave: simple-audio-card,codec { + dailink0_master: simple-audio-card,codec { #sound-dai-cells = <0>; sound-dai = <&dmic_codec>; }; --- a/arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts +++ b/arch/arm/boot/dts/overlays/vc4-fkms-v3d-overlay.dts @@ -37,4 +37,10 @@ status = "okay"; }; }; + fragment@5 { + target-path = "/chosen"; + __overlay__ { + bootargs = "clk_ignore_unused"; + }; + }; }; --- a/arch/arm/boot/dts/overlays/vc4-fkms-v3d-pi4-overlay.dts +++ b/arch/arm/boot/dts/overlays/vc4-fkms-v3d-pi4-overlay.dts @@ -41,4 +41,10 @@ status = "okay"; }; }; + fragment@5 { + target-path = "/chosen"; + __overlay__ { + bootargs = "clk_ignore_unused"; + }; + }; }; --- a/arch/arm/boot/dts/overlays/vc4-kms-dsi-7inch-overlay.dts +++ b/arch/arm/boot/dts/overlays/vc4-kms-dsi-7inch-overlay.dts @@ -11,7 +11,7 @@ / { /* No compatible as it will have come from edt-ft5406.dtsi */ - fragment@0 { + dsi_frag: fragment@0 { target = <&dsi1>; __overlay__ { #address-cells = <1>; @@ -51,8 +51,8 @@ fragment@1 { target-path = "/"; __overlay__ { - panel_disp1: panel_disp1@0 { - reg = <0>; + panel_disp: panel_disp@1 { + reg = <1>; compatible = "raspberrypi,7inch-dsi", "simple-panel"; backlight = <®_display>; power-supply = <®_display>; @@ -64,8 +64,8 @@ }; }; - reg_bridge: reg_bridge@0 { - reg = <0>; + reg_bridge: reg_bridge@1 { + reg = <1>; compatible = "regulator-fixed"; regulator-name = "bridge_reg"; gpio = <®_display 0 0>; @@ -75,7 +75,7 @@ }; }; - fragment@2 { + i2c_frag: fragment@2 { target = <&i2c_csi_dsi>; __overlay__ { #address-cells = <1>; @@ -113,6 +113,12 @@ }; __overrides__ { - disable_touch = <0>, "-10-11-12"; + dsi0 = <&dsi_frag>, "target:0=",<&dsi0>, + <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>, + <&ts_i2c_frag>, "target:0=",<&i2c_csi_dsi0>, + <&panel_disp>, "reg:0=0", + <®_bridge>, "reg:0=0", + <®_bridge>, "regulator-name=bridge_reg_0"; + disable_touch = <&ft5406>, "status=disabled"; }; }; --- a/arch/arm/boot/dts/overlays/vc4-kms-dsi-waveshare-panel-overlay.dts +++ b/arch/arm/boot/dts/overlays/vc4-kms-dsi-waveshare-panel-overlay.dts @@ -9,7 +9,7 @@ / { compatible = "brcm,bcm2835"; - fragment@0 { + dsi_frag: fragment@0 { target = <&dsi1>; __overlay__ { #address-cells = <1>; @@ -29,7 +29,7 @@ }; }; - frag2: fragment@2 { + i2c_frag: fragment@2 { target = <&i2c_csi_dsi>; __overlay__ { #address-cells = <1>; @@ -112,12 +112,14 @@ <&touch>, "touchscreen-size-y:0=1480", <&touch>, "touchscreen-inverted-x?", <&touch>, "touchscreen-swapped-x-y?"; - i2c1 = <&frag2>, "target:0=",<&i2c1>, + i2c1 = <&i2c_frag>, "target:0=",<&i2c1>, <0>, "-3-4+5"; disable_touch = <&touch>, "status=disabled"; rotation = <&panel>, "rotation:0"; invx = <&touch>,"touchscreen-inverted-x?"; invy = <&touch>,"touchscreen-inverted-y?"; swapxy = <&touch>,"touchscreen-swapped-x-y?"; + dsi0 = <&dsi_frag>, "target:0=",<&dsi0>, + <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>; }; }; --- /dev/null +++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-pi5-overlay.dts @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "cma-overlay.dts" + +&frag0 { + size = <((320-4)*1024*1024)>; +}; + +/ { + compatible = "brcm,bcm2712"; + + fragment@1 { + target = <&fb>; + __overlay__ { + status = "disabled"; + }; + }; + + fragment@2 { + target = <&aon_intr>; + __overlay__ { + status = "okay"; + }; + }; + + fragment@3 { + target = <&ddc0>; + __overlay__ { + status = "okay"; + }; + }; + + fragment@4 { + target = <&ddc1>; + __overlay__ { + status = "okay"; + }; + }; + + fragment@5 { + target = <&hdmi0>; + __overlay__ { + status = "okay"; + }; + }; + + fragment@6 { + target = <&hdmi1>; + __overlay__ { + status = "okay"; + }; + }; + + fragment@7 { + target = <&hvs>; + __overlay__ { + status = "okay"; + }; + }; + + fragment@8 { + target = <&mop>; + __overlay__ { + status = "okay"; + }; + }; + + fragment@9 { + target = <&moplet>; + __overlay__ { + status = "okay"; + }; + }; + + fragment@10 { + target = <&pixelvalve0>; + __overlay__ { + status = "okay"; + }; + }; + + fragment@11 { + target = <&pixelvalve1>; + __overlay__ { + status = "okay"; + }; + }; + + fragment@12 { + target = <&v3d>; + __overlay__ { + status = "okay"; + }; + }; + + fragment@13 { + target = <&vec>; + frag13: __overlay__ { + status = "disabled"; + }; + }; + + fragment@14 { + target = <&hdmi0>; + __dormant__ { + dmas; + }; + }; + + fragment@15 { + target = <&hdmi1>; + __dormant__ { + dmas; + }; + }; + + fragment@16 { + target = <&disp_intr>; + __overlay__ { + status = "okay"; + }; + }; + + fragment@17 { + target = <&vc4>; + __overlay__ { + /* IOMMU attaches here, where we allocate DMA buffers */ + iommus = <&iommu4>; + }; + }; + + __overrides__ { + audio = <0>,"!14"; + audio1 = <0>,"!15"; + noaudio = <0>,"=14", <0>,"=15"; + composite = <0>, "!3", + <0>, "!4", + <0>, "!5", + <0>, "!6", + <0>, "!10", + <0>, "!11", + <&frag13>, "status"; + nohdmi0 = <0>, "-3-5-10"; + nohdmi1 = <0>, "-4-6-11"; + nohdmi = <0>, "-3-4-5-6-10-11"; + }; +}; --- a/arch/arm/boot/dts/overlays/vc4-kms-vga666-overlay.dts +++ b/arch/arm/boot/dts/overlays/vc4-kms-vga666-overlay.dts @@ -94,7 +94,14 @@ }; }; + fragment@5 { + target = <&i2c_vc>; + __dormant__ { + status = "okay"; + }; + }; + __overrides__ { - ddc = <0>,"=2", <0>,"=3", <0>,"=4"; + ddc = <0>,"=2", <0>,"=3", <0>,"=4", <0>,"=5"; }; }; --- a/arch/arm/boot/dts/overlays/wm8960-soundcard-overlay.dts +++ b/arch/arm/boot/dts/overlays/wm8960-soundcard-overlay.dts @@ -6,7 +6,7 @@ compatible = "brcm,bcm2835"; fragment@0 { - target = <&i2s>; + target = <&i2s_clk_producer>; __overlay__ { status = "okay"; }; @@ -65,7 +65,7 @@ "RINPUT2", "Mic Jack"; simple-audio-card,cpu { - sound-dai = <&i2s>; + sound-dai = <&i2s_clk_producer>; }; dailink0_slave: simple-audio-card,codec { sound-dai = <&wm8960>; --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -20,6 +20,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rp dtb-$(CONFIG_ARCH_BCM2835) += bcm2710-rpi-cm3.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-cm4.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-cm4s.dtb +dtb-$(CONFIG_ARCH_BCM2835) += bcm2712-rpi-5-b.dtb subdir-y += bcmbca subdir-y += northstar2 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "arm/broadcom/bcm2712-rpi-5-b.dts"