From e5c266a61186b462c388c53a3564c375e72f2244 Mon Sep 17 00:00:00 2001 From: Hayes Wang Date: Wed, 26 Jul 2023 11:08:08 +0800 Subject: [PATCH] r8152: set bp in bulk PLA_BP_0 ~ PLA_BP_15 (0xfc28 ~ 0xfc46) are continuous registers, so we could combine the control transfers into one control transfer. Signed-off-by: Hayes Wang Link: https://lore.kernel.org/r/20230726030808.9093-419-nic_swsd@realtek.com Signed-off-by: Jakub Kicinski --- drivers/net/usb/r8152.c | 75 ++++++++++++++--------------------------- 1 file changed, 25 insertions(+), 50 deletions(-) --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -3984,29 +3984,10 @@ static void rtl_reset_bmu(struct r8152 * /* Clear the bp to stop the firmware before loading a new one */ static void rtl_clear_bp(struct r8152 *tp, u16 type) { - switch (tp->version) { - case RTL_VER_01: - case RTL_VER_02: - case RTL_VER_07: - break; - case RTL_VER_03: - case RTL_VER_04: - case RTL_VER_05: - case RTL_VER_06: - ocp_write_byte(tp, type, PLA_BP_EN, 0); - break; - case RTL_VER_14: - ocp_write_word(tp, type, USB_BP2_EN, 0); + u16 bp[16] = {0}; + u16 bp_num; - ocp_write_word(tp, type, USB_BP_8, 0); - ocp_write_word(tp, type, USB_BP_9, 0); - ocp_write_word(tp, type, USB_BP_10, 0); - ocp_write_word(tp, type, USB_BP_11, 0); - ocp_write_word(tp, type, USB_BP_12, 0); - ocp_write_word(tp, type, USB_BP_13, 0); - ocp_write_word(tp, type, USB_BP_14, 0); - ocp_write_word(tp, type, USB_BP_15, 0); - break; + switch (tp->version) { case RTL_VER_08: case RTL_VER_09: case RTL_VER_10: @@ -4014,32 +3995,31 @@ static void rtl_clear_bp(struct r8152 *t case RTL_VER_12: case RTL_VER_13: case RTL_VER_15: - default: if (type == MCU_TYPE_USB) { ocp_write_word(tp, MCU_TYPE_USB, USB_BP2_EN, 0); - - ocp_write_word(tp, MCU_TYPE_USB, USB_BP_8, 0); - ocp_write_word(tp, MCU_TYPE_USB, USB_BP_9, 0); - ocp_write_word(tp, MCU_TYPE_USB, USB_BP_10, 0); - ocp_write_word(tp, MCU_TYPE_USB, USB_BP_11, 0); - ocp_write_word(tp, MCU_TYPE_USB, USB_BP_12, 0); - ocp_write_word(tp, MCU_TYPE_USB, USB_BP_13, 0); - ocp_write_word(tp, MCU_TYPE_USB, USB_BP_14, 0); - ocp_write_word(tp, MCU_TYPE_USB, USB_BP_15, 0); - } else { - ocp_write_byte(tp, MCU_TYPE_PLA, PLA_BP_EN, 0); + bp_num = 16; + break; } + fallthrough; + case RTL_VER_03: + case RTL_VER_04: + case RTL_VER_05: + case RTL_VER_06: + ocp_write_byte(tp, type, PLA_BP_EN, 0); + fallthrough; + case RTL_VER_01: + case RTL_VER_02: + case RTL_VER_07: + bp_num = 8; + break; + case RTL_VER_14: + default: + ocp_write_word(tp, type, USB_BP2_EN, 0); + bp_num = 16; break; } - ocp_write_word(tp, type, PLA_BP_0, 0); - ocp_write_word(tp, type, PLA_BP_1, 0); - ocp_write_word(tp, type, PLA_BP_2, 0); - ocp_write_word(tp, type, PLA_BP_3, 0); - ocp_write_word(tp, type, PLA_BP_4, 0); - ocp_write_word(tp, type, PLA_BP_5, 0); - ocp_write_word(tp, type, PLA_BP_6, 0); - ocp_write_word(tp, type, PLA_BP_7, 0); + generic_ocp_write(tp, PLA_BP_0, BYTE_EN_DWORD, bp_num << 1, bp, type); /* wait 3 ms to make sure the firmware is stopped */ usleep_range(3000, 6000); @@ -5016,10 +4996,9 @@ static void rtl8152_fw_phy_nc_apply(stru static void rtl8152_fw_mac_apply(struct r8152 *tp, struct fw_mac *mac) { - u16 bp_en_addr, bp_index, type, bp_num, fw_ver_reg; + u16 bp_en_addr, type, fw_ver_reg; u32 length; u8 *data; - int i; switch (__le32_to_cpu(mac->blk_hdr.type)) { case RTL_FW_PLA: @@ -5061,12 +5040,8 @@ static void rtl8152_fw_mac_apply(struct ocp_write_word(tp, type, __le16_to_cpu(mac->bp_ba_addr), __le16_to_cpu(mac->bp_ba_value)); - bp_index = __le16_to_cpu(mac->bp_start); - bp_num = __le16_to_cpu(mac->bp_num); - for (i = 0; i < bp_num; i++) { - ocp_write_word(tp, type, bp_index, __le16_to_cpu(mac->bp[i])); - bp_index += 2; - } + generic_ocp_write(tp, __le16_to_cpu(mac->bp_start), BYTE_EN_DWORD, + __le16_to_cpu(mac->bp_num) << 1, mac->bp, type); bp_en_addr = __le16_to_cpu(mac->bp_en_addr); if (bp_en_addr)