From b04546e7923082cb50612428dcb1532f283af300 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Fri, 29 Sep 2023 16:25:10 +0300 Subject: [PATCH 0776/1085] media: rp1: csi2: Fix csi2_pad_set_fmt() The CSI-2 subdev's set_fmt currently allows setting the source and sink pad formats quite freely. This is not right, as the CSI-2 block can only do one of the following when processing the stream: 1) pass through as is, 2) expand to 16-bits, 3) compress. The csi2_pad_set_fmt() should take this into account, and only allow changing the source side mbus code, compared to the sink side format. Signed-off-by: Tomi Valkeinen --- .../media/platform/raspberrypi/rp1_cfe/csi2.c | 61 +++++++++++++++---- 1 file changed, 48 insertions(+), 13 deletions(-) --- a/drivers/media/platform/raspberrypi/rp1_cfe/csi2.c +++ b/drivers/media/platform/raspberrypi/rp1_cfe/csi2.c @@ -438,25 +438,60 @@ static int csi2_pad_set_fmt(struct v4l2_ struct v4l2_subdev_state *state, struct v4l2_subdev_format *format) { - struct v4l2_mbus_framefmt *fmt; - const struct cfe_fmt *cfe_fmt; - - /* TODO: format validation */ + if (format->pad < CSI2_NUM_CHANNELS) { + /* + * Store the sink pad format and propagate it to the source pad. + */ + + struct v4l2_mbus_framefmt *fmt; + + fmt = v4l2_subdev_get_pad_format(sd, state, format->pad); + if (!fmt) + return -EINVAL; - cfe_fmt = find_format_by_code(format->format.code); - if (!cfe_fmt) - cfe_fmt = find_format_by_code(MEDIA_BUS_FMT_SBGGR10_1X10); + *fmt = format->format; - format->format.code = cfe_fmt->code; + fmt = v4l2_subdev_get_pad_format(sd, state, + format->pad + CSI2_NUM_CHANNELS); + if (!fmt) + return -EINVAL; - fmt = v4l2_subdev_get_pad_format(sd, state, format->pad); - *fmt = format->format; + format->format.field = V4L2_FIELD_NONE; - if (format->pad < CSI2_NUM_CHANNELS) { - /* Propagate to the source pad */ - fmt = v4l2_subdev_get_pad_format(sd, state, - format->pad + CSI2_NUM_CHANNELS); *fmt = format->format; + } else { + /* + * Only allow changing the source pad mbus code. + */ + + struct v4l2_mbus_framefmt *sink_fmt, *source_fmt; + u32 sink_code; + u32 code; + + sink_fmt = v4l2_subdev_get_pad_format(sd, state, + format->pad - CSI2_NUM_CHANNELS); + if (!sink_fmt) + return -EINVAL; + + source_fmt = v4l2_subdev_get_pad_format(sd, state, format->pad); + if (!source_fmt) + return -EINVAL; + + sink_code = sink_fmt->code; + code = format->format.code; + + /* + * If the source code from the user does not match the code in + * the sink pad, check that the source code matches either the + * 16-bit version or the compressed version of the sink code. + */ + + if (code != sink_code && + (code == cfe_find_16bit_code(sink_code) || + code == cfe_find_compressed_code(sink_code))) + source_fmt->code = code; + + format->format.code = source_fmt->code; } return 0;