From 1bcfbfd7c9aa716f61a01682345a1b329f6a6e66 Mon Sep 17 00:00:00 2001 From: Christophe Kerello Date: Wed, 8 Nov 2023 15:16:37 +0100 Subject: [PATCH] mmc: mmci: stm32: add SDIO in-band interrupt mode Add the support of SDIO in-band interrupt mode for STM32 and Ux500 variants. It allows the SD I/O card to interrupt the host on SDMMC_D1 data line. It is not enabled by default on Ux500 variant as this is unstable and Ux500 users should use out-of-band IRQs. Signed-off-by: Christophe Kerello Signed-off-by: Yann Gautier Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20231108141637.119497-1-yann.gautier@foss.st.com Signed-off-by: Ulf Hansson --- drivers/mmc/host/mmci.c | 69 +++++++++++++++++++++++++++++++++++++++-- drivers/mmc/host/mmci.h | 2 ++ 2 files changed, 69 insertions(+), 2 deletions(-) --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -272,6 +272,7 @@ static struct variant_data variant_stm32 .datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN, .stm32_idmabsize_mask = GENMASK(12, 5), .stm32_idmabsize_align = BIT(5), + .supports_sdio_irq = true, .busy_timeout = true, .busy_detect = true, .busy_detect_flag = MCI_STM32_BUSYD0, @@ -299,6 +300,7 @@ static struct variant_data variant_stm32 .datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN, .stm32_idmabsize_mask = GENMASK(16, 5), .stm32_idmabsize_align = BIT(5), + .supports_sdio_irq = true, .dma_lli = true, .busy_timeout = true, .busy_detect = true, @@ -327,6 +329,7 @@ static struct variant_data variant_stm32 .datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN, .stm32_idmabsize_mask = GENMASK(16, 6), .stm32_idmabsize_align = BIT(6), + .supports_sdio_irq = true, .dma_lli = true, .busy_timeout = true, .busy_detect = true, @@ -420,8 +423,9 @@ void mmci_write_pwrreg(struct mmci_host */ static void mmci_write_datactrlreg(struct mmci_host *host, u32 datactrl) { - /* Keep busy mode in DPSM if enabled */ - datactrl |= host->datactrl_reg & host->variant->busy_dpsm_flag; + /* Keep busy mode in DPSM and SDIO mask if enabled */ + datactrl |= host->datactrl_reg & (host->variant->busy_dpsm_flag | + host->variant->datactrl_mask_sdio); if (host->datactrl_reg != datactrl) { host->datactrl_reg = datactrl; @@ -1761,6 +1765,25 @@ static irqreturn_t mmci_pio_irq(int irq, return IRQ_HANDLED; } +static void mmci_write_sdio_irq_bit(struct mmci_host *host, int enable) +{ + void __iomem *base = host->base; + u32 mask = readl_relaxed(base + MMCIMASK0); + + if (enable) + writel_relaxed(mask | MCI_ST_SDIOITMASK, base + MMCIMASK0); + else + writel_relaxed(mask & ~MCI_ST_SDIOITMASK, base + MMCIMASK0); +} + +static void mmci_signal_sdio_irq(struct mmci_host *host, u32 status) +{ + if (status & MCI_ST_SDIOIT) { + mmci_write_sdio_irq_bit(host, 0); + sdio_signal_irq(host->mmc); + } +} + /* * Handle completion of command and data transfers. */ @@ -1805,6 +1828,9 @@ static irqreturn_t mmci_irq(int irq, voi mmci_data_irq(host, host->data, status); } + if (host->variant->supports_sdio_irq) + mmci_signal_sdio_irq(host, status); + /* * Busy detection has been handled by mmci_cmd_irq() above. * Clear the status bit to prevent polling in IRQ context. @@ -2041,6 +2067,35 @@ static int mmci_sig_volt_switch(struct m return ret; } +static void mmci_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ + struct mmci_host *host = mmc_priv(mmc); + unsigned long flags; + + if (enable) + /* Keep the SDIO mode bit if SDIO irqs are enabled */ + pm_runtime_get_sync(mmc_dev(mmc)); + + spin_lock_irqsave(&host->lock, flags); + mmci_write_sdio_irq_bit(host, enable); + spin_unlock_irqrestore(&host->lock, flags); + + if (!enable) { + pm_runtime_mark_last_busy(mmc_dev(mmc)); + pm_runtime_put_autosuspend(mmc_dev(mmc)); + } +} + +static void mmci_ack_sdio_irq(struct mmc_host *mmc) +{ + struct mmci_host *host = mmc_priv(mmc); + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + mmci_write_sdio_irq_bit(host, 1); + spin_unlock_irqrestore(&host->lock, flags); +} + static struct mmc_host_ops mmci_ops = { .request = mmci_request, .pre_req = mmci_pre_request, @@ -2316,6 +2371,16 @@ static int mmci_probe(struct amba_device mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY; } + if (variant->supports_sdio_irq && host->mmc->caps & MMC_CAP_SDIO_IRQ) { + mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD; + + mmci_ops.enable_sdio_irq = mmci_enable_sdio_irq; + mmci_ops.ack_sdio_irq = mmci_ack_sdio_irq; + + mmci_write_datactrlreg(host, + host->variant->datactrl_mask_sdio); + } + /* Variants with mandatory busy timeout in HW needs R1B responses. */ if (variant->busy_timeout) mmc->caps |= MMC_CAP_NEED_RSP_BUSY; --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -331,6 +331,7 @@ enum mmci_busy_state { * register. * @opendrain: bitmask identifying the OPENDRAIN bit inside MMCIPOWER register * @dma_lli: true if variant has dma link list feature. + * @supports_sdio_irq: allow SD I/O card to interrupt the host * @stm32_idmabsize_mask: stm32 sdmmc idma buffer size. */ struct variant_data { @@ -376,6 +377,7 @@ struct variant_data { u32 start_err; u32 opendrain; u8 dma_lli:1; + bool supports_sdio_irq; u32 stm32_idmabsize_mask; u32 stm32_idmabsize_align; void (*init)(struct mmci_host *host);