From b1468a44e0c0f43a06e027efeff4183b3aee0cf7 Mon Sep 17 00:00:00 2001 From: Christophe Roullier Date: Mon, 10 Jun 2024 10:03:08 +0200 Subject: [PATCH 3/5] ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board Those pins are used for Ethernet 1 and 2 on STM32MP13F-DK board. ethernet1: RMII with crystal. ethernet2: RMII without crystal. Add analog gpio pin configuration ("sleep") to manage power mode on stm32mp13. Signed-off-by: Christophe Roullier Reviewed-by: Marek Vasut Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi | 98 +++++++++++++++++++++ 1 file changed, 98 insertions(+) --- a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi +++ b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi @@ -13,6 +13,104 @@ }; }; + eth1_rgmii_pins_a: eth1-rgmii-0 { + pins1 { + pinmux = , /* ETH_RGMII_TXD0 */ + , /* ETH_RGMII_TXD1 */ + , /* ETH_RGMII_TXD2 */ + , /* ETH_RGMII_TXD3 */ + , /* ETH_RGMII_TX_CTL */ + , /* ETH_RGMII_GTX_CLK */ + , /* ETH_MDIO */ + ; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + + pins2 { + pinmux = , /* ETH_RGMII_RXD0 */ + , /* ETH_RGMII_RXD1 */ + , /* ETH_RGMII_RXD2 */ + , /* ETH_RGMII_RXD3 */ + , /* ETH_RGMII_RX_CTL */ + ; /* ETH_RGMII_RX_CLK */ + bias-disable; + }; + + }; + + eth1_rmii_pins_a: eth1-rmii-0 { + pins1 { + pinmux = , /* ETH_RMII_TXD0 */ + , /* ETH_RMII_TXD1 */ + , /* ETH_RMII_TX_EN */ + , /* ETH_RMII_REF_CLK */ + , /* ETH_MDIO */ + ; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = , /* ETH_RMII_RXD0 */ + , /* ETH_RMII_RXD1 */ + ; /* ETH_RMII_CRS_DV */ + bias-disable; + }; + + }; + + eth1_rmii_sleep_pins_a: eth1-rmii-sleep-0 { + pins1 { + pinmux = , /* ETH_RMII_TXD0 */ + , /* ETH_RMII_TXD1 */ + , /* ETH_RMII_TX_EN */ + , /* ETH_RMII_REF_CLK */ + , /* ETH_MDIO */ + , /* ETH_MDC */ + , /* ETH_RMII_RXD0 */ + , /* ETH_RMII_RXD1 */ + ; /* ETH_RMII_CRS_DV */ + }; + }; + + eth2_rmii_pins_a: eth2-rmii-0 { + pins1 { + pinmux = , /* ETH_RMII_TXD0 */ + , /* ETH_RMII_TXD1 */ + , /* ETH_RMII_ETHCK */ + , /* ETH_RMII_TX_EN */ + , /* ETH_MDIO */ + ; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = , /* ETH_RMII_RXD0 */ + , /* ETH_RMII_RXD1 */ + ; /* ETH_RMII_CRS_DV */ + bias-disable; + }; + }; + + eth2_rmii_sleep_pins_a: eth2-rmii-sleep-0 { + pins1 { + pinmux = , /* ETH_RMII_TXD0 */ + , /* ETH_RMII_TXD1 */ + , /* ETH_RMII_ETHCK */ + , /* ETH_RMII_TX_EN */ + , /* ETH_MDIO */ + , /* ETH_MDC */ + , /* ETH_RMII_RXD0 */ + , /* ETH_RMII_RXD1 */ + ; /* ETH_RMII_CRS_DV */ + }; + }; + i2c1_pins_a: i2c1-0 { pins { pinmux = , /* I2C1_SCL */