From 4c2cec3cfad183400f191413e4867f3f07273ed6 Mon Sep 17 00:00:00 2001 From: Dave Stevenson Date: Fri, 19 May 2023 18:16:58 +0100 Subject: [PATCH] input: edt-ft5x06: Only read data for number of points reported Rather than always reading the maximum number of points supported by the chip (which may be as high as 10), read the number of active points first, and read data for just those. In most cases this will result in less data on the I2C bus, with only the maximum touch points taking more due to a second read that has to configure the start address. Signed-off-by: Dave Stevenson --- drivers/input/touchscreen/edt-ft5x06.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -220,6 +220,7 @@ static irqreturn_t edt_ft5x06_ts_isr(int offset = 5; /* where the actual touch data starts */ tplen = 4; /* data comes in so called frames */ crclen = 1; /* length of the crc data */ + datalen = tplen * tsdata->max_support_points + offset + crclen; break; case EDT_M09: @@ -230,6 +231,7 @@ static irqreturn_t edt_ft5x06_ts_isr(int offset = 3; tplen = 6; crclen = 0; + datalen = 3; break; default: @@ -237,7 +239,6 @@ static irqreturn_t edt_ft5x06_ts_isr(int } memset(rdbuf, 0, sizeof(rdbuf)); - datalen = tplen * tsdata->max_support_points + offset + crclen; error = edt_ft5x06_ts_readwrite(tsdata->client, sizeof(cmd), &cmd, @@ -267,6 +268,13 @@ static irqreturn_t edt_ft5x06_ts_isr(int * points. */ num_points = min(rdbuf[2] & 0xf, tsdata->max_support_points); + if (num_points) { + datalen = tplen * num_points + crclen; + cmd = offset; + error = edt_ft5x06_ts_readwrite(tsdata->client, + sizeof(cmd), &cmd, + datalen, &rdbuf[offset]); + } } for (i = 0; i < num_points; i++) {