// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "qca956x.dtsi" #include #include #include / { model = "COMFAST CF-E375AC"; compatible = "comfast,cf-e375ac", "qca,qca9563"; aliases { label-mac-device = ð0; led-boot = &led_lan; led-failsafe = &led_lan; led-running = &led_lan; led-upgrade = &led_lan; }; leds { compatible = "gpio-leds"; led_lan: lan { function = LED_FUNCTION_LAN; color = ; gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; }; wan { function = LED_FUNCTION_WAN; color = ; gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; }; wlan2g { label = "blue:wlan2g"; gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy1tpt"; }; }; keys { compatible = "gpio-keys"; reset { linux,code = ; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; }; watchdog { compatible = "linux,wdt-gpio"; gpios = <&gpio 6 GPIO_ACTIVE_HIGH>; hw_algo = "toggle"; hw_margin_ms = <500>; always-running; }; }; &pcie { status = "okay"; wifi@0,0 { compatible = "qcom,ath10k"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&precal_art_5000>, <&macaddr_art_0 2>; nvmem-cell-names = "pre-calibration", "mac-address"; }; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x000000 0x040000>; read-only; }; art: partition@40000 { label = "art"; reg = <0x040000 0x010000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; macaddr_art_0: macaddr@0 { compatible = "mac-base"; reg = <0x0 0x6>; #nvmem-cell-cells = <1>; }; precal_art_5000: pre-calibration@5000 { reg = <0x5000 0x2f20>; }; }; }; partition@50000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x050000 0xfa0000>; }; partition@ff0000 { label = "art-backup"; reg = <0xff0000 0x010000>; read-only; }; }; }; }; &mdio0 { status = "okay"; phy0: ethernet-phy@0 { reg = <0>; phy-mode = "sgmii"; qca,mib-poll-interval = <500>; qca,ar8327-initvals = < 0x04 0x00080080 /* PORT0 PAD MODE CTRL */ 0x7c 0x0000007e /* PORT0_STATUS */ >; }; }; ð0 { status = "okay"; pll-data = <0x03000101 0x00000101 0x00001919>; phy-mode = "sgmii"; nvmem-cells = <&macaddr_art_0 0>; nvmem-cell-names = "mac-address"; phy-handle = <&phy0>; }; &wmac { status = "okay"; mtd-cal-data = <&art 0x1000>; nvmem-cells = <&macaddr_art_0 10>; nvmem-cell-names = "mac-address"; };