// SPDX-License-Identifier: GPL-2.0-or-later #include "mt7621.dtsi" #include #include #include / { compatible = "snr,snr-cpe-me1", "mediatek,mt7621-soc"; model = "SNR-CPE-ME1"; aliases { label-mac-device = &gmac1; led-boot = &led_usb; led-failsafe = &led_vpn; led-running = &led_green; led-upgrade = &led_sys; }; leds { compatible = "gpio-leds"; led_usb: led-0 { // USB Activity color = ; function = LED_FUNCTION_USB; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; // [JTAG] JTDO }; led_vpn: led-1 { // VPN Activity color = ; function = LED_FUNCTION_INDICATOR; gpios = <&gpio 16 GPIO_ACTIVE_LOW>; // [JTAG] JTCLK }; led_sys: led-2 { // System config color = ; function = LED_FUNCTION_STATUS; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; // [I2C] I2C_SD panic-indicator; }; led_green: led-3 { // ? LED color = ; function = LED_FUNCTION_HEARTBEAT; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; // [JTAG] JTMS }; }; keys { compatible = "gpio-keys"; reset { label = "Reset Button"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; // [JTAG] JTDI linux,code = ; }; }; reg_usb_vbus: regulator { compatible = "regulator-fixed"; regulator-name = "usb_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio 17 GPIO_ACTIVE_HIGH>; enable-active-high; }; reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; }; &gmac0 { nvmem-cells = <&macaddr_factory_e000>; nvmem-cell-names = "mac-address"; }; &gmac1 { status = "okay"; label = "wan"; phy-handle = <ðphy4>; nvmem-cells = <&macaddr_factory_e006>; nvmem-cell-names = "mac-address"; }; ðphy4 { /delete-property/ interrupts; }; &pcie { status = "okay"; }; &pcie0 { // MT7603EN wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eeprom"; ieee80211-freq-limit = <2400000 2500000>; }; }; &pcie1 { // MT7610EN wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; nvmem-cells = <&eeprom_factory_8000>; nvmem-cell-names = "eeprom"; ieee80211-freq-limit = <5000000 6000000>; }; }; &spi0 { status = "okay"; flash@0 { // GD25Q128CSIG compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <44000000>; // 44 MHz partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "Bootloader"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "Config"; reg = <0x30000 0x10000>; read-only; }; partition@40000 { label = "Factory"; reg = <0x40000 0x10000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0x400>; }; eeprom_factory_8000: eeprom@8000 { reg = <0x8000 0x200>; }; macaddr_factory_e000: macaddr@e000 { reg = <0xe000 0x6>; }; macaddr_factory_e006: macaddr@e006 { reg = <0xe006 0x6>; }; }; }; partition@50000 { compatible = "openwrt,uimage", "denx,uimage"; label = "firmware"; reg = <0x50000 0xfb0000>; }; partition@30001 { label = "uboot-env"; reg = <0x30000 0x1000>; }; }; }; }; &state_default { gpio { groups = "i2c", "jtag"; function = "gpio"; }; }; &switch0 { ports { port@0 { status = "okay"; label = "lan4"; }; port@1 { status = "okay"; label = "lan3"; }; port@2 { status = "okay"; label = "lan2"; }; port@3 { status = "okay"; label = "lan1"; }; }; }; &xhci { vbus-supply = <®_usb_vbus>; vusb33-supply = <®_3p3v>; };