// SPDX-License-Identifier: GPL-2.0-only /* Realtek RTL838X Ethernet MDIO interface driver * * Copyright (C) 2020 B. Koblitz */ #include #include #include #include #include #include #include #include #include #include "rtl83xx-phy.h" extern struct rtl83xx_soc_info soc_info; extern struct mutex smi_lock; #define PHY_CTRL_REG 0 #define PHY_POWER_BIT 11 #define PHY_PAGE_2 2 #define PHY_PAGE_4 4 /* all Clause-22 RealTek MDIO PHYs use register 0x1f for page select */ #define RTL8XXX_PAGE_SELECT 0x1f #define RTL8XXX_PAGE_MAIN 0x0000 #define RTL821X_PAGE_PORT 0x0266 #define RTL821X_PAGE_POWER 0x0a40 #define RTL821X_PAGE_GPHY 0x0a42 #define RTL821X_PAGE_MAC 0x0a43 #define RTL821X_PAGE_STATE 0x0b80 #define RTL821X_PAGE_PATCH 0x0b82 /* Using the special page 0xfff with the MDIO controller found in * RealTek SoCs allows to access the PHY in RAW mode, ie. bypassing * the cache and paging engine of the MDIO controller. */ #define RTL83XX_PAGE_RAW 0x0fff /* internal RTL821X PHY uses register 0x1d to select media page */ #define RTL821XINT_MEDIA_PAGE_SELECT 0x1d /* external RTL821X PHY uses register 0x1e to select media page */ #define RTL821XEXT_MEDIA_PAGE_SELECT 0x1e #define RTL821X_MEDIA_PAGE_AUTO 0 #define RTL821X_MEDIA_PAGE_COPPER 1 #define RTL821X_MEDIA_PAGE_FIBRE 3 #define RTL821X_MEDIA_PAGE_INTERNAL 8 #define RTL9300_PHY_ID_MASK 0xf0ffffff /* This lock protects the state of the SoC automatically polling the PHYs over the SMI * bus to detect e.g. link and media changes. For operations on the PHYs such as * patching or other configuration changes such as EEE, polling needs to be disabled * since otherwise these operations may fails or lead to unpredictable results. */ DEFINE_MUTEX(poll_lock); static const struct firmware rtl838x_8380_fw; static const struct firmware rtl838x_8214fc_fw; static const struct firmware rtl838x_8218b_fw; static u64 disable_polling(int port) { u64 saved_state; mutex_lock(&poll_lock); switch (soc_info.family) { case RTL8380_FAMILY_ID: saved_state = sw_r32(RTL838X_SMI_POLL_CTRL); sw_w32_mask(BIT(port), 0, RTL838X_SMI_POLL_CTRL); break; case RTL8390_FAMILY_ID: saved_state = sw_r32(RTL839X_SMI_PORT_POLLING_CTRL + 4); saved_state <<= 32; saved_state |= sw_r32(RTL839X_SMI_PORT_POLLING_CTRL); sw_w32_mask(BIT(port % 32), 0, RTL839X_SMI_PORT_POLLING_CTRL + ((port >> 5) << 2)); break; case RTL9300_FAMILY_ID: saved_state = sw_r32(RTL930X_SMI_POLL_CTRL); sw_w32_mask(BIT(port), 0, RTL930X_SMI_POLL_CTRL); break; case RTL9310_FAMILY_ID: pr_warn("%s not implemented for RTL931X\n", __func__); break; } mutex_unlock(&poll_lock); return saved_state; } static int resume_polling(u64 saved_state) { mutex_lock(&poll_lock); switch (soc_info.family) { case RTL8380_FAMILY_ID: sw_w32(saved_state, RTL838X_SMI_POLL_CTRL); break; case RTL8390_FAMILY_ID: sw_w32(saved_state >> 32, RTL839X_SMI_PORT_POLLING_CTRL + 4); sw_w32(saved_state, RTL839X_SMI_PORT_POLLING_CTRL); break; case RTL9300_FAMILY_ID: sw_w32(saved_state, RTL930X_SMI_POLL_CTRL); break; case RTL9310_FAMILY_ID: pr_warn("%s not implemented for RTL931X\n", __func__); break; } mutex_unlock(&poll_lock); return 0; } static void rtl8380_int_phy_on_off(struct phy_device *phydev, bool on) { phy_modify(phydev, 0, BIT(11), on?0:BIT(11)); } static void rtl8380_rtl8214fc_on_off(struct phy_device *phydev, bool on) { /* fiber ports */ phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_FIBRE); phy_modify(phydev, 0x10, BIT(11), on?0:BIT(11)); /* copper ports */ phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); phy_modify_paged(phydev, RTL821X_PAGE_POWER, 0x10, BIT(11), on?0:BIT(11)); } static void rtl8380_phy_reset(struct phy_device *phydev) { phy_modify(phydev, 0, BIT(15), BIT(15)); } /* The access registers for SDS_MODE_SEL and the LSB for each SDS within */ u16 rtl9300_sds_regs[] = { 0x0194, 0x0194, 0x0194, 0x0194, 0x02a0, 0x02a0, 0x02a0, 0x02a0, 0x02A4, 0x02A4, 0x0198, 0x0198 }; u8 rtl9300_sds_lsb[] = { 0, 6, 12, 18, 0, 6, 12, 18, 0, 6, 0, 6}; /* Reset the SerDes by powering it off and set a new operations mode * of the SerDes. 0x1f is off. Other modes are * 0x02: SGMII 0x04: 1000BX_FIBER 0x05: FIBER100 * 0x06: QSGMII 0x09: RSGMII 0x0d: USXGMII * 0x10: XSGMII 0x12: HISGMII 0x16: 2500Base_X * 0x17: RXAUI_LITE 0x19: RXAUI_PLUS 0x1a: 10G Base-R * 0x1b: 10GR1000BX_AUTO 0x1f: OFF */ void rtl9300_sds_rst(int sds_num, u32 mode) { pr_info("%s %d\n", __func__, mode); if (sds_num < 0 || sds_num > 11) { pr_err("Wrong SerDes number: %d\n", sds_num); return; } sw_w32_mask(0x1f << rtl9300_sds_lsb[sds_num], 0x1f << rtl9300_sds_lsb[sds_num], rtl9300_sds_regs[sds_num]); mdelay(10); sw_w32_mask(0x1f << rtl9300_sds_lsb[sds_num], mode << rtl9300_sds_lsb[sds_num], rtl9300_sds_regs[sds_num]); mdelay(10); pr_debug("%s: 194:%08x 198:%08x 2a0:%08x 2a4:%08x\n", __func__, sw_r32(0x194), sw_r32(0x198), sw_r32(0x2a0), sw_r32(0x2a4)); } void rtl9300_sds_set(int sds_num, u32 mode) { pr_info("%s %d\n", __func__, mode); if (sds_num < 0 || sds_num > 11) { pr_err("Wrong SerDes number: %d\n", sds_num); return; } sw_w32_mask(0x1f << rtl9300_sds_lsb[sds_num], mode << rtl9300_sds_lsb[sds_num], rtl9300_sds_regs[sds_num]); mdelay(10); pr_debug("%s: 194:%08x 198:%08x 2a0:%08x 2a4:%08x\n", __func__, sw_r32(0x194), sw_r32(0x198), sw_r32(0x2a0), sw_r32(0x2a4)); } u32 rtl9300_sds_mode_get(int sds_num) { u32 v; if (sds_num < 0 || sds_num > 11) { pr_err("Wrong SerDes number: %d\n", sds_num); return 0; } v = sw_r32(rtl9300_sds_regs[sds_num]); v >>= rtl9300_sds_lsb[sds_num]; return v & 0x1f; } /* On the RTL839x family of SoCs with inbuilt SerDes, these SerDes are accessed through * a 2048 bit register that holds the contents of the PHY being simulated by the SoC. */ int rtl839x_read_sds_phy(int phy_addr, int phy_reg) { int offset = 0; int reg; u32 val; if (phy_addr == 49) offset = 0x100; /* For the RTL8393 internal SerDes, we simulate a PHY ID in registers 2/3 * which would otherwise read as 0. */ if (soc_info.id == 0x8393) { if (phy_reg == 2) return 0x1c; if (phy_reg == 3) return 0x8393; } /* Register RTL839X_SDS12_13_XSG0 is 2048 bit broad, the MSB (bit 15) of the * 0th PHY register is bit 1023 (in byte 0x80). Because PHY-registers are 16 * bit broad, we offset by reg << 1. In the SoC 2 registers are stored in * one 32 bit register. */ reg = (phy_reg << 1) & 0xfc; val = sw_r32(RTL839X_SDS12_13_XSG0 + offset + 0x80 + reg); if (phy_reg & 1) val = (val >> 16) & 0xffff; else val &= 0xffff; return val; } /* On the RTL930x family of SoCs, the internal SerDes are accessed through an IO * register which simulates commands to an internal MDIO bus. */ int rtl930x_read_sds_phy(int phy_addr, int page, int phy_reg) { int i; u32 cmd = phy_addr << 2 | page << 7 | phy_reg << 13 | 1; sw_w32(cmd, RTL930X_SDS_INDACS_CMD); for (i = 0; i < 100; i++) { if (!(sw_r32(RTL930X_SDS_INDACS_CMD) & 0x1)) break; mdelay(1); } if (i >= 100) return -EIO; return sw_r32(RTL930X_SDS_INDACS_DATA) & 0xffff; } int rtl930x_write_sds_phy(int phy_addr, int page, int phy_reg, u16 v) { int i; u32 cmd; sw_w32(v, RTL930X_SDS_INDACS_DATA); cmd = phy_addr << 2 | page << 7 | phy_reg << 13 | 0x3; for (i = 0; i < 100; i++) { if (!(sw_r32(RTL930X_SDS_INDACS_CMD) & 0x1)) break; mdelay(1); } if (i >= 100) { pr_info("%s ERROR !!!!!!!!!!!!!!!!!!!!\n", __func__); return -EIO; } return 0; } int rtl931x_read_sds_phy(int phy_addr, int page, int phy_reg) { int i; u32 cmd = phy_addr << 2 | page << 7 | phy_reg << 13 | 1; pr_debug("%s: phy_addr(SDS-ID) %d, phy_reg: %d\n", __func__, phy_addr, phy_reg); sw_w32(cmd, RTL931X_SERDES_INDRT_ACCESS_CTRL); for (i = 0; i < 100; i++) { if (!(sw_r32(RTL931X_SERDES_INDRT_ACCESS_CTRL) & 0x1)) break; mdelay(1); } if (i >= 100) return -EIO; pr_debug("%s: returning %04x\n", __func__, sw_r32(RTL931X_SERDES_INDRT_DATA_CTRL) & 0xffff); return sw_r32(RTL931X_SERDES_INDRT_DATA_CTRL) & 0xffff; } int rtl931x_write_sds_phy(int phy_addr, int page, int phy_reg, u16 v) { int i; u32 cmd; cmd = phy_addr << 2 | page << 7 | phy_reg << 13; sw_w32(cmd, RTL931X_SERDES_INDRT_ACCESS_CTRL); sw_w32(v, RTL931X_SERDES_INDRT_DATA_CTRL); cmd = sw_r32(RTL931X_SERDES_INDRT_ACCESS_CTRL) | 0x3; sw_w32(cmd, RTL931X_SERDES_INDRT_ACCESS_CTRL); for (i = 0; i < 100; i++) { if (!(sw_r32(RTL931X_SERDES_INDRT_ACCESS_CTRL) & 0x1)) break; mdelay(1); } if (i >= 100) return -EIO; return 0; } /* On the RTL838x SoCs, the internal SerDes is accessed through direct access to * standard PHY registers, where a 32 bit register holds a 16 bit word as found * in a standard page 0 of a PHY */ int rtl838x_read_sds_phy(int phy_addr, int phy_reg) { int offset = 0; u32 val; if (phy_addr == 26) offset = 0x100; val = sw_r32(RTL838X_SDS4_FIB_REG0 + offset + (phy_reg << 2)) & 0xffff; return val; } int rtl839x_write_sds_phy(int phy_addr, int phy_reg, u16 v) { int offset = 0; int reg; u32 val; if (phy_addr == 49) offset = 0x100; reg = (phy_reg << 1) & 0xfc; val = v; if (phy_reg & 1) { val = val << 16; sw_w32_mask(0xffff0000, val, RTL839X_SDS12_13_XSG0 + offset + 0x80 + reg); } else { sw_w32_mask(0xffff, val, RTL839X_SDS12_13_XSG0 + offset + 0x80 + reg); } return 0; } /* Read the link and speed status of the 2 internal SGMII/1000Base-X * ports of the RTL838x SoCs */ static int rtl8380_read_status(struct phy_device *phydev) { int err; err = genphy_read_status(phydev); if (phydev->link) { phydev->speed = SPEED_1000; phydev->duplex = DUPLEX_FULL; } return err; } /* Read the link and speed status of the 2 internal SGMII/1000Base-X * ports of the RTL8393 SoC */ static int rtl8393_read_status(struct phy_device *phydev) { int offset = 0; int err; int phy_addr = phydev->mdio.addr; u32 v; err = genphy_read_status(phydev); if (phy_addr == 49) offset = 0x100; if (phydev->link) { phydev->speed = SPEED_100; /* Read SPD_RD_00 (bit 13) and SPD_RD_01 (bit 6) out of the internal * PHY registers */ v = sw_r32(RTL839X_SDS12_13_XSG0 + offset + 0x80); if (!(v & (1 << 13)) && (v & (1 << 6))) phydev->speed = SPEED_1000; phydev->duplex = DUPLEX_FULL; } return err; } static int rtl8226_read_page(struct phy_device *phydev) { return __phy_read(phydev, RTL8XXX_PAGE_SELECT); } static int rtl8226_write_page(struct phy_device *phydev, int page) { return __phy_write(phydev, RTL8XXX_PAGE_SELECT, page); } static int rtl8226_read_status(struct phy_device *phydev) { int ret = 0, i; u32 val; /* TODO: ret = genphy_read_status(phydev); * if (ret < 0) { * pr_info("%s: genphy_read_status failed\n", __func__); * return ret; * } */ /* Link status must be read twice */ for (i = 0; i < 2; i++) val = phy_read_mmd(phydev, MMD_VEND2, 0xA402); phydev->link = val & BIT(2) ? 1 : 0; if (!phydev->link) goto out; /* Read duplex status */ val = phy_read_mmd(phydev, MMD_VEND2, 0xA434); if (val < 0) goto out; phydev->duplex = !!(val & BIT(3)); /* Read speed */ val = phy_read_mmd(phydev, MMD_VEND2, 0xA434); switch (val & 0x0630) { case 0x0000: phydev->speed = SPEED_10; break; case 0x0010: phydev->speed = SPEED_100; break; case 0x0020: phydev->speed = SPEED_1000; break; case 0x0200: phydev->speed = SPEED_10000; break; case 0x0210: phydev->speed = SPEED_2500; break; case 0x0220: phydev->speed = SPEED_5000; break; default: break; } out: return ret; } static int rtl8226_advertise_aneg(struct phy_device *phydev) { int ret = 0; u32 v; pr_info("In %s\n", __func__); v = phy_read_mmd(phydev, MMD_AN, 16); if (v < 0) goto out; v |= BIT(5); /* HD 10M */ v |= BIT(6); /* FD 10M */ v |= BIT(7); /* HD 100M */ v |= BIT(8); /* FD 100M */ ret = phy_write_mmd(phydev, MMD_AN, 16, v); /* Allow 1GBit */ v = phy_read_mmd(phydev, MMD_VEND2, 0xA412); if (v < 0) goto out; v |= BIT(9); /* FD 1000M */ ret = phy_write_mmd(phydev, MMD_VEND2, 0xA412, v); if (ret < 0) goto out; /* Allow 2.5G */ v = phy_read_mmd(phydev, MMD_AN, 32); if (v < 0) goto out; v |= BIT(7); ret = phy_write_mmd(phydev, MMD_AN, 32, v); out: return ret; } static int rtl8226_config_aneg(struct phy_device *phydev) { int ret = 0; u32 v; pr_debug("In %s\n", __func__); if (phydev->autoneg == AUTONEG_ENABLE) { ret = rtl8226_advertise_aneg(phydev); if (ret) goto out; /* AutoNegotiationEnable */ v = phy_read_mmd(phydev, MMD_AN, 0); if (v < 0) goto out; v |= BIT(12); /* Enable AN */ ret = phy_write_mmd(phydev, MMD_AN, 0, v); if (ret < 0) goto out; /* RestartAutoNegotiation */ v = phy_read_mmd(phydev, MMD_VEND2, 0xA400); if (v < 0) goto out; v |= BIT(9); ret = phy_write_mmd(phydev, MMD_VEND2, 0xA400, v); } /* TODO: ret = __genphy_config_aneg(phydev, ret); */ out: return ret; } static int rtl8226_get_eee(struct phy_device *phydev, struct ethtool_eee *e) { u32 val; int addr = phydev->mdio.addr; pr_debug("In %s, port %d, was enabled: %d\n", __func__, addr, e->eee_enabled); val = phy_read_mmd(phydev, MMD_AN, 60); if (e->eee_enabled) { e->eee_enabled = !!(val & BIT(1)); if (!e->eee_enabled) { val = phy_read_mmd(phydev, MMD_AN, 62); e->eee_enabled = !!(val & BIT(0)); } } pr_debug("%s: enabled: %d\n", __func__, e->eee_enabled); return 0; } static int rtl8226_set_eee(struct phy_device *phydev, struct ethtool_eee *e) { int port = phydev->mdio.addr; u64 poll_state; bool an_enabled; u32 val; pr_info("In %s, port %d, enabled %d\n", __func__, port, e->eee_enabled); poll_state = disable_polling(port); /* Remember aneg state */ val = phy_read_mmd(phydev, MMD_AN, 0); an_enabled = !!(val & BIT(12)); /* Setup 100/1000MBit */ val = phy_read_mmd(phydev, MMD_AN, 60); if (e->eee_enabled) val |= 0x6; else val &= 0x6; phy_write_mmd(phydev, MMD_AN, 60, val); /* Setup 2.5GBit */ val = phy_read_mmd(phydev, MMD_AN, 62); if (e->eee_enabled) val |= 0x1; else val &= 0x1; phy_write_mmd(phydev, MMD_AN, 62, val); /* RestartAutoNegotiation */ val = phy_read_mmd(phydev, MMD_VEND2, 0xA400); val |= BIT(9); phy_write_mmd(phydev, MMD_VEND2, 0xA400, val); resume_polling(poll_state); return 0; } static struct fw_header *rtl838x_request_fw(struct phy_device *phydev, const struct firmware *fw, const char *name) { struct device *dev = &phydev->mdio.dev; int err; struct fw_header *h; uint32_t checksum, my_checksum; err = request_firmware(&fw, name, dev); if (err < 0) goto out; if (fw->size < sizeof(struct fw_header)) { pr_err("Firmware size too small.\n"); err = -EINVAL; goto out; } h = (struct fw_header *) fw->data; pr_info("Firmware loaded. Size %d, magic: %08x\n", fw->size, h->magic); if (h->magic != 0x83808380) { pr_err("Wrong firmware file: MAGIC mismatch.\n"); goto out; } checksum = h->checksum; h->checksum = 0; my_checksum = ~crc32(0xFFFFFFFFU, fw->data, fw->size); if (checksum != my_checksum) { pr_err("Firmware checksum mismatch.\n"); err = -EINVAL; goto out; } h->checksum = checksum; return h; out: dev_err(dev, "Unable to load firmware %s (%d)\n", name, err); return NULL; } static void rtl821x_phy_setup_package_broadcast(struct phy_device *phydev, bool enable) { int mac = phydev->mdio.addr; /* select main page 0 */ phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN); /* write to 0x8 to register 0x1d on main page 0 */ phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL); /* select page 0x266 */ phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL821X_PAGE_PORT); /* set phy id and target broadcast bitmap in register 0x16 on page 0x266 */ phy_write_paged(phydev, RTL83XX_PAGE_RAW, 0x16, (enable?0xff00:0x00) | mac); /* return to main page 0 */ phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN); /* write to 0x0 to register 0x1d on main page 0 */ phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); mdelay(1); } static int rtl8390_configure_generic(struct phy_device *phydev) { int mac = phydev->mdio.addr; u32 val, phy_id; val = phy_read(phydev, 2); phy_id = val << 16; val = phy_read(phydev, 3); phy_id |= val; pr_debug("Phy on MAC %d: %x\n", mac, phy_id); /* Read internal PHY ID */ phy_write_paged(phydev, 31, 27, 0x0002); val = phy_read_paged(phydev, 31, 28); /* Internal RTL8218B, version 2 */ phydev_info(phydev, "Detected unknown %x\n", val); return 0; } static int rtl8380_configure_int_rtl8218b(struct phy_device *phydev) { u32 val, phy_id; int i, p, ipd_flag; int mac = phydev->mdio.addr; struct fw_header *h; u32 *rtl838x_6275B_intPhy_perport; u32 *rtl8218b_6276B_hwEsd_perport; val = phy_read(phydev, 2); phy_id = val << 16; val = phy_read(phydev, 3); phy_id |= val; pr_debug("Phy on MAC %d: %x\n", mac, phy_id); /* Read internal PHY ID */ phy_write_paged(phydev, 31, 27, 0x0002); val = phy_read_paged(phydev, 31, 28); if (val != 0x6275) { phydev_err(phydev, "Expected internal RTL8218B, found PHY-ID %x\n", val); return -1; } /* Internal RTL8218B, version 2 */ phydev_info(phydev, "Detected internal RTL8218B\n"); h = rtl838x_request_fw(phydev, &rtl838x_8380_fw, FIRMWARE_838X_8380_1); if (!h) return -1; if (h->phy != 0x83800000) { phydev_err(phydev, "Wrong firmware file: PHY mismatch.\n"); return -1; } rtl838x_6275B_intPhy_perport = (void *)h + sizeof(struct fw_header) + h->parts[8].start; rtl8218b_6276B_hwEsd_perport = (void *)h + sizeof(struct fw_header) + h->parts[9].start; if (sw_r32(RTL838X_DMY_REG31) == 0x1) ipd_flag = 1; val = phy_read(phydev, 0); if (val & BIT(11)) rtl8380_int_phy_on_off(phydev, true); else rtl8380_phy_reset(phydev); msleep(100); /* Ready PHY for patch */ for (p = 0; p < 8; p++) { phy_package_port_write_paged(phydev, p, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL821X_PAGE_PATCH); phy_package_port_write_paged(phydev, p, RTL83XX_PAGE_RAW, 0x10, 0x0010); } msleep(500); for (p = 0; p < 8; p++) { for (i = 0; i < 100 ; i++) { val = phy_package_port_read_paged(phydev, p, RTL821X_PAGE_STATE, 0x10); if (val & 0x40) break; } if (i >= 100) { phydev_err(phydev, "ERROR: Port %d not ready for patch.\n", mac + p); return -1; } } for (p = 0; p < 8; p++) { i = 0; while (rtl838x_6275B_intPhy_perport[i * 2]) { phy_package_port_write_paged(phydev, p, RTL83XX_PAGE_RAW, rtl838x_6275B_intPhy_perport[i * 2], rtl838x_6275B_intPhy_perport[i * 2 + 1]); i++; } i = 0; while (rtl8218b_6276B_hwEsd_perport[i * 2]) { phy_package_port_write_paged(phydev, p, RTL83XX_PAGE_RAW, rtl8218b_6276B_hwEsd_perport[i * 2], rtl8218b_6276B_hwEsd_perport[i * 2 + 1]); i++; } } return 0; } static int rtl8380_configure_ext_rtl8218b(struct phy_device *phydev) { u32 val, ipd, phy_id; int i, l; int mac = phydev->mdio.addr; struct fw_header *h; u32 *rtl8380_rtl8218b_perchip; u32 *rtl8218B_6276B_rtl8380_perport; u32 *rtl8380_rtl8218b_perport; if (soc_info.family == RTL8380_FAMILY_ID && mac != 0 && mac != 16) { phydev_err(phydev, "External RTL8218B must have PHY-IDs 0 or 16!\n"); return -1; } val = phy_read(phydev, 2); phy_id = val << 16; val = phy_read(phydev, 3); phy_id |= val; pr_info("Phy on MAC %d: %x\n", mac, phy_id); /* Read internal PHY ID */ phy_write_paged(phydev, 31, 27, 0x0002); val = phy_read_paged(phydev, 31, 28); if (val != 0x6276) { phydev_err(phydev, "Expected external RTL8218B, found PHY-ID %x\n", val); return -1; } phydev_info(phydev, "Detected external RTL8218B\n"); h = rtl838x_request_fw(phydev, &rtl838x_8218b_fw, FIRMWARE_838X_8218b_1); if (!h) return -1; if (h->phy != 0x8218b000) { phydev_err(phydev, "Wrong firmware file: PHY mismatch.\n"); return -1; } rtl8380_rtl8218b_perchip = (void *)h + sizeof(struct fw_header) + h->parts[0].start; rtl8218B_6276B_rtl8380_perport = (void *)h + sizeof(struct fw_header) + h->parts[1].start; rtl8380_rtl8218b_perport = (void *)h + sizeof(struct fw_header) + h->parts[2].start; val = phy_read(phydev, 0); if (val & (1 << 11)) rtl8380_int_phy_on_off(phydev, true); else rtl8380_phy_reset(phydev); msleep(100); /* Get Chip revision */ phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN); phy_write_paged(phydev, RTL83XX_PAGE_RAW, 0x1b, 0x4); val = phy_read_paged(phydev, RTL83XX_PAGE_RAW, 0x1c); phydev_info(phydev, "Detected chip revision %04x\n", val); i = 0; while (rtl8380_rtl8218b_perchip[i * 3] && rtl8380_rtl8218b_perchip[i * 3 + 1]) { phy_package_port_write_paged(phydev, rtl8380_rtl8218b_perchip[i * 3], RTL83XX_PAGE_RAW, rtl8380_rtl8218b_perchip[i * 3 + 1], rtl8380_rtl8218b_perchip[i * 3 + 2]); i++; } /* Enable PHY */ for (i = 0; i < 8; i++) { phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN); phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, 0x00, 0x1140); } mdelay(100); /* Request patch */ for (i = 0; i < 8; i++) { phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL821X_PAGE_PATCH); phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, 0x10, 0x0010); } mdelay(300); /* Verify patch readiness */ for (i = 0; i < 8; i++) { for (l = 0; l < 100; l++) { val = phy_package_port_read_paged(phydev, i, RTL821X_PAGE_STATE, 0x10); if (val & 0x40) break; } if (l >= 100) { phydev_err(phydev, "Could not patch PHY\n"); return -1; } } /* Use Broadcast ID method for patching */ rtl821x_phy_setup_package_broadcast(phydev, true); phy_write_paged(phydev, RTL83XX_PAGE_RAW, 30, 8); phy_write_paged(phydev, 0x26e, 17, 0xb); phy_write_paged(phydev, 0x26e, 16, 0x2); mdelay(1); ipd = phy_read_paged(phydev, 0x26e, 19); phy_write_paged(phydev, 0, 30, 0); ipd = (ipd >> 4) & 0xf; /* unused ? */ i = 0; while (rtl8218B_6276B_rtl8380_perport[i * 2]) { phy_write_paged(phydev, RTL83XX_PAGE_RAW, rtl8218B_6276B_rtl8380_perport[i * 2], rtl8218B_6276B_rtl8380_perport[i * 2 + 1]); i++; } /* Disable broadcast ID */ rtl821x_phy_setup_package_broadcast(phydev, false); return 0; } static int rtl8218b_ext_match_phy_device(struct phy_device *phydev) { int addr = phydev->mdio.addr; /* Both the RTL8214FC and the external RTL8218B have the same * PHY ID. On the RTL838x, the RTL8218B can only be attached_dev * at PHY IDs 0-7, while the RTL8214FC must be attached via * the pair of SGMII/1000Base-X with higher PHY-IDs */ if (soc_info.family == RTL8380_FAMILY_ID) return phydev->phy_id == PHY_ID_RTL8218B_E && addr < 8; else return phydev->phy_id == PHY_ID_RTL8218B_E; } static bool rtl8214fc_media_is_fibre(struct phy_device *phydev) { int mac = phydev->mdio.addr; static int reg[] = {16, 19, 20, 21}; u32 val; phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL); val = phy_package_read_paged(phydev, RTL821X_PAGE_PORT, reg[mac % 4]); phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); if (val & BIT(11)) return false; return true; } static void rtl8214fc_power_set(struct phy_device *phydev, int port, bool on) { char *state = on ? "on" : "off"; if (port == PORT_FIBRE) { pr_info("%s: Powering %s FIBRE (port %d)\n", __func__, state, phydev->mdio.addr); phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_FIBRE); } else { pr_info("%s: Powering %s COPPER (port %d)\n", __func__, state, phydev->mdio.addr); phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); } if (on) { phy_modify_paged(phydev, RTL821X_PAGE_POWER, 0x10, BIT(11), 0); } else { phy_modify_paged(phydev, RTL821X_PAGE_POWER, 0x10, 0, BIT(11)); } phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); } static int rtl8214fc_suspend(struct phy_device *phydev) { rtl8214fc_power_set(phydev, PORT_MII, false); rtl8214fc_power_set(phydev, PORT_FIBRE, false); return 0; } static int rtl8214fc_resume(struct phy_device *phydev) { if (rtl8214fc_media_is_fibre(phydev)) { rtl8214fc_power_set(phydev, PORT_MII, false); rtl8214fc_power_set(phydev, PORT_FIBRE, true); } else { rtl8214fc_power_set(phydev, PORT_FIBRE, false); rtl8214fc_power_set(phydev, PORT_MII, true); } return 0; } static void rtl8214fc_media_set(struct phy_device *phydev, bool set_fibre) { int mac = phydev->mdio.addr; static int reg[] = {16, 19, 20, 21}; int val; pr_info("%s: port %d, set_fibre: %d\n", __func__, mac, set_fibre); phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL); val = phy_package_read_paged(phydev, RTL821X_PAGE_PORT, reg[mac % 4]); val |= BIT(10); if (set_fibre) { val &= ~BIT(11); } else { val |= BIT(11); } phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL); phy_package_write_paged(phydev, RTL821X_PAGE_PORT, reg[mac % 4], val); phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); if (!phydev->suspended) { if (set_fibre) { rtl8214fc_power_set(phydev, PORT_MII, false); rtl8214fc_power_set(phydev, PORT_FIBRE, true); } else { rtl8214fc_power_set(phydev, PORT_FIBRE, false); rtl8214fc_power_set(phydev, PORT_MII, true); } } } static int rtl8214fc_set_port(struct phy_device *phydev, int port) { bool is_fibre = (port == PORT_FIBRE ? true : false); int addr = phydev->mdio.addr; pr_debug("%s port %d to %d\n", __func__, addr, port); rtl8214fc_media_set(phydev, is_fibre); return 0; } static int rtl8214fc_get_port(struct phy_device *phydev) { int addr = phydev->mdio.addr; pr_debug("%s: port %d\n", __func__, addr); if (rtl8214fc_media_is_fibre(phydev)) return PORT_FIBRE; return PORT_MII; } /* Enable EEE on the RTL8218B PHYs * The method used is not the preferred way (which would be based on the MAC-EEE state, * but the only way that works since the kernel first enables EEE in the MAC * and then sets up the PHY. The MAC-based approach would require the oppsite. */ void rtl8218d_eee_set(struct phy_device *phydev, bool enable) { u32 val; bool an_enabled; pr_debug("In %s %d, enable %d\n", __func__, phydev->mdio.addr, enable); /* Set GPHY page to copper */ phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); val = phy_read(phydev, 0); an_enabled = val & BIT(12); /* Enable 100M (bit 1) / 1000M (bit 2) EEE */ val = phy_read_mmd(phydev, 7, 60); val |= BIT(2) | BIT(1); phy_write_mmd(phydev, 7, 60, enable ? 0x6 : 0); /* 500M EEE ability */ val = phy_read_paged(phydev, RTL821X_PAGE_GPHY, 20); if (enable) val |= BIT(7); else val &= ~BIT(7); phy_write_paged(phydev, RTL821X_PAGE_GPHY, 20, val); /* Restart AN if enabled */ if (an_enabled) { val = phy_read(phydev, 0); val |= BIT(9); phy_write(phydev, 0, val); } /* GPHY page back to auto */ phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); } static int rtl8218b_get_eee(struct phy_device *phydev, struct ethtool_eee *e) { u32 val; int addr = phydev->mdio.addr; pr_debug("In %s, port %d, was enabled: %d\n", __func__, addr, e->eee_enabled); /* Set GPHY page to copper */ phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); val = phy_read_paged(phydev, 7, 60); if (e->eee_enabled) { /* Verify vs MAC-based EEE */ e->eee_enabled = !!(val & BIT(7)); if (!e->eee_enabled) { val = phy_read_paged(phydev, RTL821X_PAGE_MAC, 25); e->eee_enabled = !!(val & BIT(4)); } } pr_debug("%s: enabled: %d\n", __func__, e->eee_enabled); /* GPHY page to auto */ phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); return 0; } static int rtl8218d_get_eee(struct phy_device *phydev, struct ethtool_eee *e) { u32 val; int addr = phydev->mdio.addr; pr_debug("In %s, port %d, was enabled: %d\n", __func__, addr, e->eee_enabled); /* Set GPHY page to copper */ phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); val = phy_read_paged(phydev, 7, 60); if (e->eee_enabled) e->eee_enabled = !!(val & BIT(7)); pr_debug("%s: enabled: %d\n", __func__, e->eee_enabled); /* GPHY page to auto */ phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); return 0; } static int rtl8214fc_set_eee(struct phy_device *phydev, struct ethtool_eee *e) { u32 poll_state; int port = phydev->mdio.addr; bool an_enabled; u32 val; pr_debug("In %s port %d, enabled %d\n", __func__, port, e->eee_enabled); if (rtl8214fc_media_is_fibre(phydev)) { netdev_err(phydev->attached_dev, "Port %d configured for FIBRE", port); return -ENOTSUPP; } poll_state = disable_polling(port); /* Set GPHY page to copper */ phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); /* Get auto-negotiation status */ val = phy_read(phydev, 0); an_enabled = val & BIT(12); pr_info("%s: aneg: %d\n", __func__, an_enabled); val = phy_read_paged(phydev, RTL821X_PAGE_MAC, 25); val &= ~BIT(5); /* Use MAC-based EEE */ phy_write_paged(phydev, RTL821X_PAGE_MAC, 25, val); /* Enable 100M (bit 1) / 1000M (bit 2) EEE */ phy_write_paged(phydev, 7, 60, e->eee_enabled ? 0x6 : 0); /* 500M EEE ability */ val = phy_read_paged(phydev, RTL821X_PAGE_GPHY, 20); if (e->eee_enabled) val |= BIT(7); else val &= ~BIT(7); phy_write_paged(phydev, RTL821X_PAGE_GPHY, 20, val); /* Restart AN if enabled */ if (an_enabled) { pr_info("%s: doing aneg\n", __func__); val = phy_read(phydev, 0); val |= BIT(9); phy_write(phydev, 0, val); } /* GPHY page back to auto */ phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); resume_polling(poll_state); return 0; } static int rtl8214fc_get_eee(struct phy_device *phydev, struct ethtool_eee *e) { int addr = phydev->mdio.addr; pr_debug("In %s port %d, enabled %d\n", __func__, addr, e->eee_enabled); if (rtl8214fc_media_is_fibre(phydev)) { netdev_err(phydev->attached_dev, "Port %d configured for FIBRE", addr); return -ENOTSUPP; } return rtl8218b_get_eee(phydev, e); } static int rtl8218b_set_eee(struct phy_device *phydev, struct ethtool_eee *e) { int port = phydev->mdio.addr; u64 poll_state; u32 val; bool an_enabled; pr_info("In %s, port %d, enabled %d\n", __func__, port, e->eee_enabled); poll_state = disable_polling(port); /* Set GPHY page to copper */ phy_write(phydev, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); val = phy_read(phydev, 0); an_enabled = val & BIT(12); if (e->eee_enabled) { /* 100/1000M EEE Capability */ phy_write(phydev, 13, 0x0007); phy_write(phydev, 14, 0x003C); phy_write(phydev, 13, 0x4007); phy_write(phydev, 14, 0x0006); val = phy_read_paged(phydev, RTL821X_PAGE_MAC, 25); val |= BIT(4); phy_write_paged(phydev, RTL821X_PAGE_MAC, 25, val); } else { /* 100/1000M EEE Capability */ phy_write(phydev, 13, 0x0007); phy_write(phydev, 14, 0x003C); phy_write(phydev, 13, 0x0007); phy_write(phydev, 14, 0x0000); val = phy_read_paged(phydev, RTL821X_PAGE_MAC, 25); val &= ~BIT(4); phy_write_paged(phydev, RTL821X_PAGE_MAC, 25, val); } /* Restart AN if enabled */ if (an_enabled) { val = phy_read(phydev, 0); val |= BIT(9); phy_write(phydev, 0, val); } /* GPHY page back to auto */ phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); pr_info("%s done\n", __func__); resume_polling(poll_state); return 0; } static int rtl8218d_set_eee(struct phy_device *phydev, struct ethtool_eee *e) { int addr = phydev->mdio.addr; u64 poll_state; pr_info("In %s, port %d, enabled %d\n", __func__, addr, e->eee_enabled); poll_state = disable_polling(addr); rtl8218d_eee_set(phydev, (bool) e->eee_enabled); resume_polling(poll_state); return 0; } static int rtl8214c_match_phy_device(struct phy_device *phydev) { return phydev->phy_id == PHY_ID_RTL8214C; } static int rtl8380_configure_rtl8214c(struct phy_device *phydev) { u32 phy_id, val; int mac = phydev->mdio.addr; val = phy_read(phydev, 2); phy_id = val << 16; val = phy_read(phydev, 3); phy_id |= val; pr_debug("Phy on MAC %d: %x\n", mac, phy_id); phydev_info(phydev, "Detected external RTL8214C\n"); /* GPHY auto conf */ phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); return 0; } static int rtl8380_configure_rtl8214fc(struct phy_device *phydev) { u32 phy_id, val, page = 0; int i, l; int mac = phydev->mdio.addr; struct fw_header *h; u32 *rtl8380_rtl8214fc_perchip; u32 *rtl8380_rtl8214fc_perport; val = phy_read(phydev, 2); phy_id = val << 16; val = phy_read(phydev, 3); phy_id |= val; pr_debug("Phy on MAC %d: %x\n", mac, phy_id); /* Read internal PHY id */ phy_write_paged(phydev, 0, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); phy_write_paged(phydev, 0x1f, 0x1b, 0x0002); val = phy_read_paged(phydev, 0x1f, 0x1c); if (val != 0x6276) { phydev_err(phydev, "Expected external RTL8214FC, found PHY-ID %x\n", val); return -1; } phydev_info(phydev, "Detected external RTL8214FC\n"); h = rtl838x_request_fw(phydev, &rtl838x_8214fc_fw, FIRMWARE_838X_8214FC_1); if (!h) return -1; if (h->phy != 0x8214fc00) { phydev_err(phydev, "Wrong firmware file: PHY mismatch.\n"); return -1; } rtl8380_rtl8214fc_perchip = (void *)h + sizeof(struct fw_header) + h->parts[0].start; rtl8380_rtl8214fc_perport = (void *)h + sizeof(struct fw_header) + h->parts[1].start; /* detect phy version */ phy_write_paged(phydev, RTL83XX_PAGE_RAW, 27, 0x0004); val = phy_read_paged(phydev, RTL83XX_PAGE_RAW, 28); val = phy_read(phydev, 16); if (val & (1 << 11)) rtl8380_rtl8214fc_on_off(phydev, true); else rtl8380_phy_reset(phydev); msleep(100); phy_write_paged(phydev, 0, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); i = 0; while (rtl8380_rtl8214fc_perchip[i * 3] && rtl8380_rtl8214fc_perchip[i * 3 + 1]) { if (rtl8380_rtl8214fc_perchip[i * 3 + 1] == 0x1f) page = rtl8380_rtl8214fc_perchip[i * 3 + 2]; if (rtl8380_rtl8214fc_perchip[i * 3 + 1] == 0x13 && page == 0x260) { val = phy_read_paged(phydev, 0x260, 13); val = (val & 0x1f00) | (rtl8380_rtl8214fc_perchip[i * 3 + 2] & 0xe0ff); phy_write_paged(phydev, RTL83XX_PAGE_RAW, rtl8380_rtl8214fc_perchip[i * 3 + 1], val); } else { phy_write_paged(phydev, RTL83XX_PAGE_RAW, rtl8380_rtl8214fc_perchip[i * 3 + 1], rtl8380_rtl8214fc_perchip[i * 3 + 2]); } i++; } /* Force copper medium */ for (i = 0; i < 4; i++) { phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN); phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); } /* Enable PHY */ for (i = 0; i < 4; i++) { phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN); phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, 0x00, 0x1140); } mdelay(100); /* Disable Autosensing */ for (i = 0; i < 4; i++) { for (l = 0; l < 100; l++) { val = phy_package_port_read_paged(phydev, i, RTL821X_PAGE_GPHY, 0x10); if ((val & 0x7) >= 3) break; } if (l >= 100) { phydev_err(phydev, "Could not disable autosensing\n"); return -1; } } /* Request patch */ for (i = 0; i < 4; i++) { phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL821X_PAGE_PATCH); phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, 0x10, 0x0010); } mdelay(300); /* Verify patch readiness */ for (i = 0; i < 4; i++) { for (l = 0; l < 100; l++) { val = phy_package_port_read_paged(phydev, i, RTL821X_PAGE_STATE, 0x10); if (val & 0x40) break; } if (l >= 100) { phydev_err(phydev, "Could not patch PHY\n"); return -1; } } /* Use Broadcast ID method for patching */ rtl821x_phy_setup_package_broadcast(phydev, true); i = 0; while (rtl8380_rtl8214fc_perport[i * 2]) { phy_write_paged(phydev, RTL83XX_PAGE_RAW, rtl8380_rtl8214fc_perport[i * 2], rtl8380_rtl8214fc_perport[i * 2 + 1]); i++; } /* Disable broadcast ID */ rtl821x_phy_setup_package_broadcast(phydev, false); /* Auto medium selection */ for (i = 0; i < 4; i++) { phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN); phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); } return 0; } static int rtl8214fc_match_phy_device(struct phy_device *phydev) { int addr = phydev->mdio.addr; return phydev->phy_id == PHY_ID_RTL8214FC && addr >= 24; } static int rtl8380_configure_serdes(struct phy_device *phydev) { u32 v; u32 sds_conf_value; int i; struct fw_header *h; u32 *rtl8380_sds_take_reset; u32 *rtl8380_sds_common; u32 *rtl8380_sds01_qsgmii_6275b; u32 *rtl8380_sds23_qsgmii_6275b; u32 *rtl8380_sds4_fiber_6275b; u32 *rtl8380_sds5_fiber_6275b; u32 *rtl8380_sds_reset; u32 *rtl8380_sds_release_reset; phydev_info(phydev, "Detected internal RTL8380 SERDES\n"); h = rtl838x_request_fw(phydev, &rtl838x_8218b_fw, FIRMWARE_838X_8380_1); if (!h) return -1; if (h->magic != 0x83808380) { phydev_err(phydev, "Wrong firmware file: magic number mismatch.\n"); return -1; } rtl8380_sds_take_reset = (void *)h + sizeof(struct fw_header) + h->parts[0].start; rtl8380_sds_common = (void *)h + sizeof(struct fw_header) + h->parts[1].start; rtl8380_sds01_qsgmii_6275b = (void *)h + sizeof(struct fw_header) + h->parts[2].start; rtl8380_sds23_qsgmii_6275b = (void *)h + sizeof(struct fw_header) + h->parts[3].start; rtl8380_sds4_fiber_6275b = (void *)h + sizeof(struct fw_header) + h->parts[4].start; rtl8380_sds5_fiber_6275b = (void *)h + sizeof(struct fw_header) + h->parts[5].start; rtl8380_sds_reset = (void *)h + sizeof(struct fw_header) + h->parts[6].start; rtl8380_sds_release_reset = (void *)h + sizeof(struct fw_header) + h->parts[7].start; /* Back up serdes power off value */ sds_conf_value = sw_r32(RTL838X_SDS_CFG_REG); pr_info("SDS power down value: %x\n", sds_conf_value); /* take serdes into reset */ i = 0; while (rtl8380_sds_take_reset[2 * i]) { sw_w32(rtl8380_sds_take_reset[2 * i + 1], rtl8380_sds_take_reset[2 * i]); i++; udelay(1000); } /* apply common serdes patch */ i = 0; while (rtl8380_sds_common[2 * i]) { sw_w32(rtl8380_sds_common[2 * i + 1], rtl8380_sds_common[2 * i]); i++; udelay(1000); } /* internal R/W enable */ sw_w32(3, RTL838X_INT_RW_CTRL); /* SerDes ports 4 and 5 are FIBRE ports */ sw_w32_mask(0x7 | 0x38, 1 | (1 << 3), RTL838X_INT_MODE_CTRL); /* SerDes module settings, SerDes 0-3 are QSGMII */ v = 0x6 << 25 | 0x6 << 20 | 0x6 << 15 | 0x6 << 10; /* SerDes 4 and 5 are 1000BX FIBRE */ v |= 0x4 << 5 | 0x4; sw_w32(v, RTL838X_SDS_MODE_SEL); pr_info("PLL control register: %x\n", sw_r32(RTL838X_PLL_CML_CTRL)); sw_w32_mask(0xfffffff0, 0xaaaaaaaf & 0xf, RTL838X_PLL_CML_CTRL); i = 0; while (rtl8380_sds01_qsgmii_6275b[2 * i]) { sw_w32(rtl8380_sds01_qsgmii_6275b[2 * i + 1], rtl8380_sds01_qsgmii_6275b[2 * i]); i++; } i = 0; while (rtl8380_sds23_qsgmii_6275b[2 * i]) { sw_w32(rtl8380_sds23_qsgmii_6275b[2 * i + 1], rtl8380_sds23_qsgmii_6275b[2 * i]); i++; } i = 0; while (rtl8380_sds4_fiber_6275b[2 * i]) { sw_w32(rtl8380_sds4_fiber_6275b[2 * i + 1], rtl8380_sds4_fiber_6275b[2 * i]); i++; } i = 0; while (rtl8380_sds5_fiber_6275b[2 * i]) { sw_w32(rtl8380_sds5_fiber_6275b[2 * i + 1], rtl8380_sds5_fiber_6275b[2 * i]); i++; } i = 0; while (rtl8380_sds_reset[2 * i]) { sw_w32(rtl8380_sds_reset[2 * i + 1], rtl8380_sds_reset[2 * i]); i++; } i = 0; while (rtl8380_sds_release_reset[2 * i]) { sw_w32(rtl8380_sds_release_reset[2 * i + 1], rtl8380_sds_release_reset[2 * i]); i++; } pr_info("SDS power down value now: %x\n", sw_r32(RTL838X_SDS_CFG_REG)); sw_w32(sds_conf_value, RTL838X_SDS_CFG_REG); pr_info("Configuration of SERDES done\n"); return 0; } static int rtl8390_configure_serdes(struct phy_device *phydev) { phydev_info(phydev, "Detected internal RTL8390 SERDES\n"); /* In autoneg state, force link, set SR4_CFG_EN_LINK_FIB1G */ sw_w32_mask(0, 1 << 18, RTL839X_SDS12_13_XSG0 + 0x0a); /* Disable EEE: Clear FRE16_EEE_RSG_FIB1G, FRE16_EEE_STD_FIB1G, * FRE16_C1_PWRSAV_EN_FIB1G, FRE16_C2_PWRSAV_EN_FIB1G * and FRE16_EEE_QUIET_FIB1G */ sw_w32_mask(0x1f << 10, 0, RTL839X_SDS12_13_XSG0 + 0xe0); return 0; } void rtl9300_sds_field_w(int sds, u32 page, u32 reg, int end_bit, int start_bit, u32 v) { int l = end_bit - start_bit + 1; u32 data = v; if (l < 32) { u32 mask = BIT(l) - 1; data = rtl930x_read_sds_phy(sds, page, reg); data &= ~(mask << start_bit); data |= (v & mask) << start_bit; } rtl930x_write_sds_phy(sds, page, reg, data); } u32 rtl9300_sds_field_r(int sds, u32 page, u32 reg, int end_bit, int start_bit) { int l = end_bit - start_bit + 1; u32 v = rtl930x_read_sds_phy(sds, page, reg); if (l >= 32) return v; return (v >> start_bit) & (BIT(l) - 1); } /* Read the link and speed status of the internal SerDes of the RTL9300 */ static int rtl9300_read_status(struct phy_device *phydev) { struct device *dev = &phydev->mdio.dev; int phy_addr = phydev->mdio.addr; struct device_node *dn; u32 sds_num = 0, status, latch_status, mode; if (dev->of_node) { dn = dev->of_node; if (of_property_read_u32(dn, "sds", &sds_num)) sds_num = -1; pr_info("%s: Port %d, SerDes is %d\n", __func__, phy_addr, sds_num); } else { dev_err(dev, "No DT node.\n"); return -EINVAL; } if (sds_num < 0) return 0; mode = rtl9300_sds_mode_get(sds_num); pr_info("%s got SDS mode %02x\n", __func__, mode); if (mode == 0x1a) { /* 10GR mode */ status = rtl9300_sds_field_r(sds_num, 0x5, 0, 12, 12); latch_status = rtl9300_sds_field_r(sds_num, 0x4, 1, 2, 2); status |= rtl9300_sds_field_r(sds_num, 0x5, 0, 12, 12); latch_status |= rtl9300_sds_field_r(sds_num, 0x4, 1, 2, 2); } else { status = rtl9300_sds_field_r(sds_num, 0x1, 29, 8, 0); latch_status = rtl9300_sds_field_r(sds_num, 0x1, 30, 8, 0); status |= rtl9300_sds_field_r(sds_num, 0x1, 29, 8, 0); latch_status |= rtl9300_sds_field_r(sds_num, 0x1, 30, 8, 0); } pr_info("%s link status: status: %d, latch %d\n", __func__, status, latch_status); if (latch_status) { phydev->link = true; if (mode == 0x1a) phydev->speed = SPEED_10000; else phydev->speed = SPEED_1000; phydev->duplex = DUPLEX_FULL; } return 0; } void rtl930x_sds_rx_rst(int sds_num, phy_interface_t phy_if) { int page = 0x2e; /* 10GR and USXGMII */ if (phy_if == PHY_INTERFACE_MODE_1000BASEX) page = 0x24; rtl9300_sds_field_w(sds_num, page, 0x15, 4, 4, 0x1); mdelay(5); rtl9300_sds_field_w(sds_num, page, 0x15, 4, 4, 0x0); } /* Force PHY modes on 10GBit Serdes */ void rtl9300_force_sds_mode(int sds, phy_interface_t phy_if) { int sds_mode; bool lc_on; int i, lc_value; int lane_0 = (sds % 2) ? sds - 1 : sds; u32 v, cr_0, cr_1, cr_2; u32 m_bit, l_bit; pr_info("%s: SDS: %d, mode %d\n", __func__, sds, phy_if); switch (phy_if) { case PHY_INTERFACE_MODE_SGMII: sds_mode = 0x2; lc_on = false; lc_value = 0x1; break; case PHY_INTERFACE_MODE_HSGMII: sds_mode = 0x12; lc_value = 0x3; /* Configure LC */ break; case PHY_INTERFACE_MODE_1000BASEX: sds_mode = 0x04; lc_on = false; break; case PHY_INTERFACE_MODE_2500BASEX: sds_mode = 0x16; lc_value = 0x3; /* Configure LC */ break; case PHY_INTERFACE_MODE_10GBASER: sds_mode = 0x1a; lc_on = true; lc_value = 0x5; break; case PHY_INTERFACE_MODE_NA: /* This will disable SerDes */ sds_mode = 0x1f; break; default: pr_err("%s: unknown serdes mode: %s\n", __func__, phy_modes(phy_if)); return; } pr_info("%s --------------------- serdes %d forcing to %x ...\n", __func__, sds, sds_mode); /* Power down SerDes */ rtl9300_sds_field_w(sds, 0x20, 0, 7, 6, 0x3); if (sds == 5) pr_info("%s after %x\n", __func__, rtl930x_read_sds_phy(sds, 0x20, 0)); if (sds == 5) pr_info("%s a %x\n", __func__, rtl930x_read_sds_phy(sds, 0x1f, 9)); /* Force mode enable */ rtl9300_sds_field_w(sds, 0x1f, 9, 6, 6, 0x1); if (sds == 5) pr_info("%s b %x\n", __func__, rtl930x_read_sds_phy(sds, 0x1f, 9)); /* SerDes off */ rtl9300_sds_field_w(sds, 0x1f, 9, 11, 7, 0x1f); if (phy_if == PHY_INTERFACE_MODE_NA) return; if (sds == 5) pr_info("%s c %x\n", __func__, rtl930x_read_sds_phy(sds, 0x20, 18)); /* Enable LC and ring */ rtl9300_sds_field_w(lane_0, 0x20, 18, 3, 0, 0xf); if (sds == lane_0) rtl9300_sds_field_w(lane_0, 0x20, 18, 5, 4, 0x1); else rtl9300_sds_field_w(lane_0, 0x20, 18, 7, 6, 0x1); rtl9300_sds_field_w(sds, 0x20, 0, 5, 4, 0x3); if (lc_on) rtl9300_sds_field_w(lane_0, 0x20, 18, 11, 8, lc_value); else rtl9300_sds_field_w(lane_0, 0x20, 18, 15, 12, lc_value); /* Force analog LC & ring on */ rtl9300_sds_field_w(lane_0, 0x21, 11, 3, 0, 0xf); v = lc_on ? 0x3 : 0x1; if (sds == lane_0) rtl9300_sds_field_w(lane_0, 0x20, 18, 5, 4, v); else rtl9300_sds_field_w(lane_0, 0x20, 18, 7, 6, v); /* Force SerDes mode */ rtl9300_sds_field_w(sds, 0x1f, 9, 6, 6, 1); rtl9300_sds_field_w(sds, 0x1f, 9, 11, 7, sds_mode); /* Toggle LC or Ring */ for (i = 0; i < 20; i++) { mdelay(200); rtl930x_write_sds_phy(lane_0, 0x1f, 2, 53); m_bit = (lane_0 == sds) ? (4) : (5); l_bit = (lane_0 == sds) ? (4) : (5); cr_0 = rtl9300_sds_field_r(lane_0, 0x1f, 20, m_bit, l_bit); mdelay(10); cr_1 = rtl9300_sds_field_r(lane_0, 0x1f, 20, m_bit, l_bit); mdelay(10); cr_2 = rtl9300_sds_field_r(lane_0, 0x1f, 20, m_bit, l_bit); if (cr_0 && cr_1 && cr_2) { u32 t; if (phy_if != PHY_INTERFACE_MODE_10GBASER) break; t = rtl9300_sds_field_r(sds, 0x6, 0x1, 2, 2); rtl9300_sds_field_w(sds, 0x6, 0x1, 2, 2, 0x1); /* Reset FSM */ rtl9300_sds_field_w(sds, 0x6, 0x2, 12, 12, 0x1); mdelay(10); rtl9300_sds_field_w(sds, 0x6, 0x2, 12, 12, 0x0); mdelay(10); /* Need to read this twice */ v = rtl9300_sds_field_r(sds, 0x5, 0, 12, 12); v = rtl9300_sds_field_r(sds, 0x5, 0, 12, 12); rtl9300_sds_field_w(sds, 0x6, 0x1, 2, 2, t); /* Reset FSM again */ rtl9300_sds_field_w(sds, 0x6, 0x2, 12, 12, 0x1); mdelay(10); rtl9300_sds_field_w(sds, 0x6, 0x2, 12, 12, 0x0); mdelay(10); if (v == 1) break; } m_bit = (phy_if == PHY_INTERFACE_MODE_10GBASER) ? 3 : 1; l_bit = (phy_if == PHY_INTERFACE_MODE_10GBASER) ? 2 : 0; rtl9300_sds_field_w(lane_0, 0x21, 11, m_bit, l_bit, 0x2); mdelay(10); rtl9300_sds_field_w(lane_0, 0x21, 11, m_bit, l_bit, 0x3); } rtl930x_sds_rx_rst(sds, phy_if); /* Re-enable power */ rtl9300_sds_field_w(sds, 0x20, 0, 7, 6, 0); pr_info("%s --------------------- serdes %d forced to %x DONE\n", __func__, sds, sds_mode); } void rtl9300_sds_tx_config(int sds, phy_interface_t phy_if) { /* parameters: rtl9303_80G_txParam_s2 */ int impedance = 0x8; int pre_amp = 0x2; int main_amp = 0x9; int post_amp = 0x2; int pre_en = 0x1; int post_en = 0x1; int page; switch(phy_if) { case PHY_INTERFACE_MODE_1000BASEX: page = 0x25; break; case PHY_INTERFACE_MODE_HSGMII: case PHY_INTERFACE_MODE_2500BASEX: page = 0x29; break; case PHY_INTERFACE_MODE_10GBASER: page = 0x2f; break; default: pr_err("%s: unsupported PHY mode\n", __func__); return; } rtl9300_sds_field_w(sds, page, 0x01, 15, 11, pre_amp); rtl9300_sds_field_w(sds, page, 0x06, 4, 0, post_amp); rtl9300_sds_field_w(sds, page, 0x07, 0, 0, pre_en); rtl9300_sds_field_w(sds, page, 0x07, 3, 3, post_en); rtl9300_sds_field_w(sds, page, 0x07, 8, 4, main_amp); rtl9300_sds_field_w(sds, page, 0x18, 15, 12, impedance); } /* Wait for clock ready, this assumes the SerDes is in XGMII mode * timeout is in ms */ int rtl9300_sds_clock_wait(int timeout) { u32 v; unsigned long start = jiffies; do { rtl9300_sds_field_w(2, 0x1f, 0x2, 15, 0, 53); v = rtl9300_sds_field_r(2, 0x1f, 20, 5, 4); if (v == 3) return 0; } while (jiffies < start + (HZ / 1000) * timeout); return 1; } void rtl9300_serdes_mac_link_config(int sds, bool tx_normal, bool rx_normal) { u32 v10, v1; v10 = rtl930x_read_sds_phy(sds, 6, 2); /* 10GBit, page 6, reg 2 */ v1 = rtl930x_read_sds_phy(sds, 0, 0); /* 1GBit, page 0, reg 0 */ pr_info("%s: registers before %08x %08x\n", __func__, v10, v1); v10 &= ~(BIT(13) | BIT(14)); v1 &= ~(BIT(8) | BIT(9)); v10 |= rx_normal ? 0 : BIT(13); v1 |= rx_normal ? 0 : BIT(9); v10 |= tx_normal ? 0 : BIT(14); v1 |= tx_normal ? 0 : BIT(8); rtl930x_write_sds_phy(sds, 6, 2, v10); rtl930x_write_sds_phy(sds, 0, 0, v1); v10 = rtl930x_read_sds_phy(sds, 6, 2); v1 = rtl930x_read_sds_phy(sds, 0, 0); pr_info("%s: registers after %08x %08x\n", __func__, v10, v1); } void rtl9300_sds_rxcal_dcvs_manual(u32 sds_num, u32 dcvs_id, bool manual, u32 dvcs_list[]) { if (manual) { switch(dcvs_id) { case 0: rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 14, 14, 0x1); rtl9300_sds_field_w(sds_num, 0x2f, 0x03, 5, 5, dvcs_list[0]); rtl9300_sds_field_w(sds_num, 0x2f, 0x03, 4, 0, dvcs_list[1]); break; case 1: rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 13, 13, 0x1); rtl9300_sds_field_w(sds_num, 0x2e, 0x1d, 15, 15, dvcs_list[0]); rtl9300_sds_field_w(sds_num, 0x2e, 0x1d, 14, 11, dvcs_list[1]); break; case 2: rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 12, 12, 0x1); rtl9300_sds_field_w(sds_num, 0x2e, 0x1d, 10, 10, dvcs_list[0]); rtl9300_sds_field_w(sds_num, 0x2e, 0x1d, 9, 6, dvcs_list[1]); break; case 3: rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 11, 11, 0x1); rtl9300_sds_field_w(sds_num, 0x2e, 0x1d, 5, 5, dvcs_list[0]); rtl9300_sds_field_w(sds_num, 0x2e, 0x1d, 4, 1, dvcs_list[1]); break; case 4: rtl9300_sds_field_w(sds_num, 0x2e, 0x01, 15, 15, 0x1); rtl9300_sds_field_w(sds_num, 0x2e, 0x11, 10, 10, dvcs_list[0]); rtl9300_sds_field_w(sds_num, 0x2e, 0x11, 9, 6, dvcs_list[1]); break; case 5: rtl9300_sds_field_w(sds_num, 0x2e, 0x02, 11, 11, 0x1); rtl9300_sds_field_w(sds_num, 0x2e, 0x11, 4, 4, dvcs_list[0]); rtl9300_sds_field_w(sds_num, 0x2e, 0x11, 3, 0, dvcs_list[1]); break; default: break; } } else { switch(dcvs_id) { case 0: rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 14, 14, 0x0); break; case 1: rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 13, 13, 0x0); break; case 2: rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 12, 12, 0x0); break; case 3: rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 11, 11, 0x0); break; case 4: rtl9300_sds_field_w(sds_num, 0x2e, 0x01, 15, 15, 0x0); break; case 5: rtl9300_sds_field_w(sds_num, 0x2e, 0x02, 11, 11, 0x0); break; default: break; } mdelay(1); } } void rtl9300_sds_rxcal_dcvs_get(u32 sds_num, u32 dcvs_id, u32 dcvs_list[]) { u32 dcvs_sign_out = 0, dcvs_coef_bin = 0; bool dcvs_manual; if (!(sds_num % 2)) rtl930x_write_sds_phy(sds_num, 0x1f, 0x2, 0x2f); else rtl930x_write_sds_phy(sds_num - 1, 0x1f, 0x2, 0x31); /* ##Page0x2E, Reg0x15[9], REG0_RX_EN_TEST=[1] */ rtl9300_sds_field_w(sds_num, 0x2e, 0x15, 9, 9, 0x1); /* ##Page0x21, Reg0x06[11 6], REG0_RX_DEBUG_SEL=[1 0 x x x x] */ rtl9300_sds_field_w(sds_num, 0x21, 0x06, 11, 6, 0x20); switch(dcvs_id) { case 0: rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0x22); mdelay(1); /* ##DCVS0 Read Out */ dcvs_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4); dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0); dcvs_manual = !!rtl9300_sds_field_r(sds_num, 0x2e, 0x1e, 14, 14); break; case 1: rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0x23); mdelay(1); /* ##DCVS0 Read Out */ dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4); dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0); dcvs_manual = !!rtl9300_sds_field_r(sds_num, 0x2e, 0x1e, 13, 13); break; case 2: rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0x24); mdelay(1); /* ##DCVS0 Read Out */ dcvs_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4); dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0); dcvs_manual = !!rtl9300_sds_field_r(sds_num, 0x2e, 0x1e, 12, 12); break; case 3: rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0x25); mdelay(1); /* ##DCVS0 Read Out */ dcvs_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4); dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0); dcvs_manual = rtl9300_sds_field_r(sds_num, 0x2e, 0x1e, 11, 11); break; case 4: rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0x2c); mdelay(1); /* ##DCVS0 Read Out */ dcvs_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4); dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0); dcvs_manual = !!rtl9300_sds_field_r(sds_num, 0x2e, 0x01, 15, 15); break; case 5: rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0x2d); mdelay(1); /* ##DCVS0 Read Out */ dcvs_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4); dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0); dcvs_manual = rtl9300_sds_field_r(sds_num, 0x2e, 0x02, 11, 11); break; default: break; } if (dcvs_sign_out) pr_info("%s DCVS %u Sign: -", __func__, dcvs_id); else pr_info("%s DCVS %u Sign: +", __func__, dcvs_id); pr_info("DCVS %u even coefficient = %u", dcvs_id, dcvs_coef_bin); pr_info("DCVS %u manual = %u", dcvs_id, dcvs_manual); dcvs_list[0] = dcvs_sign_out; dcvs_list[1] = dcvs_coef_bin; } void rtl9300_sds_rxcal_leq_manual(u32 sds_num, bool manual, u32 leq_gray) { if (manual) { rtl9300_sds_field_w(sds_num, 0x2e, 0x18, 15, 15, 0x1); rtl9300_sds_field_w(sds_num, 0x2e, 0x16, 14, 10, leq_gray); } else { rtl9300_sds_field_w(sds_num, 0x2e, 0x18, 15, 15, 0x0); mdelay(100); } } void rtl9300_sds_rxcal_leq_offset_manual(u32 sds_num, bool manual, u32 offset) { if (manual) { rtl9300_sds_field_w(sds_num, 0x2e, 0x17, 6, 2, offset); } else { rtl9300_sds_field_w(sds_num, 0x2e, 0x17, 6, 2, offset); mdelay(1); } } #define GRAY_BITS 5 u32 rtl9300_sds_rxcal_gray_to_binary(u32 gray_code) { int i, j, m; u32 g[GRAY_BITS]; u32 c[GRAY_BITS]; u32 leq_binary = 0; for(i = 0; i < GRAY_BITS; i++) g[i] = (gray_code & BIT(i)) >> i; m = GRAY_BITS - 1; c[m] = g[m]; for(i = 0; i < m; i++) { c[i] = g[i]; for(j = i + 1; j < GRAY_BITS; j++) c[i] = c[i] ^ g[j]; } for(i = 0; i < GRAY_BITS; i++) leq_binary += c[i] << i; return leq_binary; } u32 rtl9300_sds_rxcal_leq_read(int sds_num) { u32 leq_gray, leq_bin; bool leq_manual; if (!(sds_num % 2)) rtl930x_write_sds_phy(sds_num, 0x1f, 0x2, 0x2f); else rtl930x_write_sds_phy(sds_num - 1, 0x1f, 0x2, 0x31); /* ##Page0x2E, Reg0x15[9], REG0_RX_EN_TEST=[1] */ rtl9300_sds_field_w(sds_num, 0x2e, 0x15, 9, 9, 0x1); /* ##Page0x21, Reg0x06[11 6], REG0_RX_DEBUG_SEL=[0 1 x x x x] */ rtl9300_sds_field_w(sds_num, 0x21, 0x06, 11, 6, 0x10); mdelay(1); /* ##LEQ Read Out */ leq_gray = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 7, 3); leq_manual = !!rtl9300_sds_field_r(sds_num, 0x2e, 0x18, 15, 15); leq_bin = rtl9300_sds_rxcal_gray_to_binary(leq_gray); pr_info("LEQ_gray: %u, LEQ_bin: %u", leq_gray, leq_bin); pr_info("LEQ manual: %u", leq_manual); return leq_bin; } void rtl9300_sds_rxcal_vth_manual(u32 sds_num, bool manual, u32 vth_list[]) { if (manual) { rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, 13, 13, 0x1); rtl9300_sds_field_w(sds_num, 0x2e, 0x13, 5, 3, vth_list[0]); rtl9300_sds_field_w(sds_num, 0x2e, 0x13, 2, 0, vth_list[1]); } else { rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, 13, 13, 0x0); mdelay(10); } } void rtl9300_sds_rxcal_vth_get(u32 sds_num, u32 vth_list[]) { u32 vth_manual; /* ##Page0x1F, Reg0x02[15 0], REG_DBGO_SEL=[0x002F]; */ /* Lane0 */ /* ##Page0x1F, Reg0x02[15 0], REG_DBGO_SEL=[0x0031]; */ /* Lane1 */ if (!(sds_num % 2)) rtl930x_write_sds_phy(sds_num, 0x1f, 0x2, 0x2f); else rtl930x_write_sds_phy(sds_num - 1, 0x1f, 0x2, 0x31); /* ##Page0x2E, Reg0x15[9], REG0_RX_EN_TEST=[1] */ rtl9300_sds_field_w(sds_num, 0x2e, 0x15, 9, 9, 0x1); /* ##Page0x21, Reg0x06[11 6], REG0_RX_DEBUG_SEL=[1 0 x x x x] */ rtl9300_sds_field_w(sds_num, 0x21, 0x06, 11, 6, 0x20); /* ##Page0x2F, Reg0x0C[5 0], REG0_COEF_SEL=[0 0 1 1 0 0] */ rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0xc); mdelay(1); /* ##VthP & VthN Read Out */ vth_list[0] = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 2, 0); /* v_thp set bin */ vth_list[1] = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 5, 3); /* v_thn set bin */ pr_info("vth_set_bin = %d", vth_list[0]); pr_info("vth_set_bin = %d", vth_list[1]); vth_manual = !!rtl9300_sds_field_r(sds_num, 0x2e, 0x0f, 13, 13); pr_info("Vth Maunal = %d", vth_manual); } void rtl9300_sds_rxcal_tap_manual(u32 sds_num, int tap_id, bool manual, u32 tap_list[]) { if (manual) { switch(tap_id) { case 0: /* ##REG0_LOAD_IN_INIT[0]=1; REG0_TAP0_INIT[5:0]=Tap0_Value */ rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, tap_id + 7, tap_id + 7, 0x1); rtl9300_sds_field_w(sds_num, 0x2f, 0x03, 5, 5, tap_list[0]); rtl9300_sds_field_w(sds_num, 0x2f, 0x03, 4, 0, tap_list[1]); break; case 1: rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, tap_id + 7, tap_id + 7, 0x1); rtl9300_sds_field_w(sds_num, 0x21, 0x07, 6, 6, tap_list[0]); rtl9300_sds_field_w(sds_num, 0x2e, 0x09, 11, 6, tap_list[1]); rtl9300_sds_field_w(sds_num, 0x21, 0x07, 5, 5, tap_list[2]); rtl9300_sds_field_w(sds_num, 0x2f, 0x12, 5, 0, tap_list[3]); break; case 2: rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, tap_id + 7, tap_id + 7, 0x1); rtl9300_sds_field_w(sds_num, 0x2e, 0x09, 5, 5, tap_list[0]); rtl9300_sds_field_w(sds_num, 0x2e, 0x09, 4, 0, tap_list[1]); rtl9300_sds_field_w(sds_num, 0x2e, 0x0a, 11, 11, tap_list[2]); rtl9300_sds_field_w(sds_num, 0x2e, 0x0a, 10, 6, tap_list[3]); break; case 3: rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, tap_id + 7, tap_id + 7, 0x1); rtl9300_sds_field_w(sds_num, 0x2e, 0x0a, 5, 5, tap_list[0]); rtl9300_sds_field_w(sds_num, 0x2e, 0x0a, 4, 0, tap_list[1]); rtl9300_sds_field_w(sds_num, 0x2e, 0x06, 5, 5, tap_list[2]); rtl9300_sds_field_w(sds_num, 0x2e, 0x06, 4, 0, tap_list[3]); break; case 4: rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, tap_id + 7, tap_id + 7, 0x1); rtl9300_sds_field_w(sds_num, 0x2f, 0x01, 5, 5, tap_list[0]); rtl9300_sds_field_w(sds_num, 0x2f, 0x01, 4, 0, tap_list[1]); rtl9300_sds_field_w(sds_num, 0x2e, 0x06, 11, 11, tap_list[2]); rtl9300_sds_field_w(sds_num, 0x2e, 0x06, 10, 6, tap_list[3]); break; default: break; } } else { rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, tap_id + 7, tap_id + 7, 0x0); mdelay(10); } } void rtl9300_sds_rxcal_tap_get(u32 sds_num, u32 tap_id, u32 tap_list[]) { u32 tap0_sign_out; u32 tap0_coef_bin; u32 tap_sign_out_even; u32 tap_coef_bin_even; u32 tap_sign_out_odd; u32 tap_coef_bin_odd; bool tap_manual; if (!(sds_num % 2)) rtl930x_write_sds_phy(sds_num, 0x1f, 0x2, 0x2f); else rtl930x_write_sds_phy(sds_num - 1, 0x1f, 0x2, 0x31); /* ##Page0x2E, Reg0x15[9], REG0_RX_EN_TEST=[1] */ rtl9300_sds_field_w(sds_num, 0x2e, 0x15, 9, 9, 0x1); /* ##Page0x21, Reg0x06[11 6], REG0_RX_DEBUG_SEL=[1 0 x x x x] */ rtl9300_sds_field_w(sds_num, 0x21, 0x06, 11, 6, 0x20); if (!tap_id) { /* ##Page0x2F, Reg0x0C[5 0], REG0_COEF_SEL=[0 0 0 0 0 1] */ rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0); /* ##Tap1 Even Read Out */ mdelay(1); tap0_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 5, 5); tap0_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 0); if (tap0_sign_out == 1) pr_info("Tap0 Sign : -"); else pr_info("Tap0 Sign : +"); pr_info("tap0_coef_bin = %d", tap0_coef_bin); tap_list[0] = tap0_sign_out; tap_list[1] = tap0_coef_bin; tap_manual = !!rtl9300_sds_field_r(sds_num, 0x2e, 0x0f, 7, 7); pr_info("tap0 manual = %u",tap_manual); } else { /* ##Page0x2F, Reg0x0C[5 0], REG0_COEF_SEL=[0 0 0 0 0 1] */ rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, tap_id); mdelay(1); /* ##Tap1 Even Read Out */ tap_sign_out_even = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 5, 5); tap_coef_bin_even = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 0); /* ##Page0x2F, Reg0x0C[5 0], REG0_COEF_SEL=[0 0 0 1 1 0] */ rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, (tap_id + 5)); /* ##Tap1 Odd Read Out */ tap_sign_out_odd = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 5, 5); tap_coef_bin_odd = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 0); if (tap_sign_out_even == 1) pr_info("Tap %u even sign: -", tap_id); else pr_info("Tap %u even sign: +", tap_id); pr_info("Tap %u even coefficient = %u", tap_id, tap_coef_bin_even); if (tap_sign_out_odd == 1) pr_info("Tap %u odd sign: -", tap_id); else pr_info("Tap %u odd sign: +", tap_id); pr_info("Tap %u odd coefficient = %u", tap_id,tap_coef_bin_odd); tap_list[0] = tap_sign_out_even; tap_list[1] = tap_coef_bin_even; tap_list[2] = tap_sign_out_odd; tap_list[3] = tap_coef_bin_odd; tap_manual = rtl9300_sds_field_r(sds_num, 0x2e, 0x0f, tap_id + 7, tap_id + 7); pr_info("tap %u manual = %d",tap_id, tap_manual); } } void rtl9300_do_rx_calibration_1(int sds, phy_interface_t phy_mode) { /* From both rtl9300_rxCaliConf_serdes_myParam and rtl9300_rxCaliConf_phy_myParam */ int tap0_init_val = 0x1f; /* Initial Decision Fed Equalizer 0 tap */ int vth_min = 0x0; pr_info("start_1.1.1 initial value for sds %d\n", sds); rtl930x_write_sds_phy(sds, 6, 0, 0); /* FGCAL */ rtl9300_sds_field_w(sds, 0x2e, 0x01, 14, 14, 0x00); rtl9300_sds_field_w(sds, 0x2e, 0x1c, 10, 5, 0x20); rtl9300_sds_field_w(sds, 0x2f, 0x02, 0, 0, 0x01); /* DCVS */ rtl9300_sds_field_w(sds, 0x2e, 0x1e, 14, 11, 0x00); rtl9300_sds_field_w(sds, 0x2e, 0x01, 15, 15, 0x00); rtl9300_sds_field_w(sds, 0x2e, 0x02, 11, 11, 0x00); rtl9300_sds_field_w(sds, 0x2e, 0x1c, 4, 0, 0x00); rtl9300_sds_field_w(sds, 0x2e, 0x1d, 15, 11, 0x00); rtl9300_sds_field_w(sds, 0x2e, 0x1d, 10, 6, 0x00); rtl9300_sds_field_w(sds, 0x2e, 0x1d, 5, 1, 0x00); rtl9300_sds_field_w(sds, 0x2e, 0x02, 10, 6, 0x00); rtl9300_sds_field_w(sds, 0x2e, 0x11, 4, 0, 0x00); rtl9300_sds_field_w(sds, 0x2f, 0x00, 3, 0, 0x0f); rtl9300_sds_field_w(sds, 0x2e, 0x04, 6, 6, 0x01); rtl9300_sds_field_w(sds, 0x2e, 0x04, 7, 7, 0x01); /* LEQ (Long Term Equivalent signal level) */ rtl9300_sds_field_w(sds, 0x2e, 0x16, 14, 8, 0x00); /* DFE (Decision Fed Equalizer) */ rtl9300_sds_field_w(sds, 0x2f, 0x03, 5, 0, tap0_init_val); rtl9300_sds_field_w(sds, 0x2e, 0x09, 11, 6, 0x00); rtl9300_sds_field_w(sds, 0x2e, 0x09, 5, 0, 0x00); rtl9300_sds_field_w(sds, 0x2e, 0x0a, 5, 0, 0x00); rtl9300_sds_field_w(sds, 0x2f, 0x01, 5, 0, 0x00); rtl9300_sds_field_w(sds, 0x2f, 0x12, 5, 0, 0x00); rtl9300_sds_field_w(sds, 0x2e, 0x0a, 11, 6, 0x00); rtl9300_sds_field_w(sds, 0x2e, 0x06, 5, 0, 0x00); rtl9300_sds_field_w(sds, 0x2f, 0x01, 5, 0, 0x00); /* Vth */ rtl9300_sds_field_w(sds, 0x2e, 0x13, 5, 3, 0x07); rtl9300_sds_field_w(sds, 0x2e, 0x13, 2, 0, 0x07); rtl9300_sds_field_w(sds, 0x2f, 0x0b, 5, 3, vth_min); pr_info("end_1.1.1 --\n"); pr_info("start_1.1.2 Load DFE init. value\n"); rtl9300_sds_field_w(sds, 0x2e, 0x0f, 13, 7, 0x7f); pr_info("end_1.1.2\n"); pr_info("start_1.1.3 disable LEQ training,enable DFE clock\n"); rtl9300_sds_field_w(sds, 0x2e, 0x17, 7, 7, 0x00); rtl9300_sds_field_w(sds, 0x2e, 0x17, 6, 2, 0x00); rtl9300_sds_field_w(sds, 0x2e, 0x0c, 8, 8, 0x00); rtl9300_sds_field_w(sds, 0x2e, 0x0b, 4, 4, 0x01); rtl9300_sds_field_w(sds, 0x2e, 0x12, 14, 14, 0x00); rtl9300_sds_field_w(sds, 0x2f, 0x02, 15, 15, 0x00); pr_info("end_1.1.3 --\n"); pr_info("start_1.1.4 offset cali setting\n"); rtl9300_sds_field_w(sds, 0x2e, 0x0f, 15, 14, 0x03); pr_info("end_1.1.4\n"); pr_info("start_1.1.5 LEQ and DFE setting\n"); /* TODO: make this work for DAC cables of different lengths */ /* For a 10GBit serdes wit Fibre, SDS 8 or 9 */ if (phy_mode == PHY_INTERFACE_MODE_10GBASER || PHY_INTERFACE_MODE_1000BASEX) rtl9300_sds_field_w(sds, 0x2e, 0x16, 3, 2, 0x02); else pr_err("%s not PHY-based or SerDes, implement DAC!\n", __func__); /* No serdes, check for Aquantia PHYs */ rtl9300_sds_field_w(sds, 0x2e, 0x16, 3, 2, 0x02); rtl9300_sds_field_w(sds, 0x2e, 0x0f, 6, 0, 0x5f); rtl9300_sds_field_w(sds, 0x2f, 0x05, 7, 2, 0x1f); rtl9300_sds_field_w(sds, 0x2e, 0x19, 9, 5, 0x1f); rtl9300_sds_field_w(sds, 0x2f, 0x0b, 15, 9, 0x3c); rtl9300_sds_field_w(sds, 0x2e, 0x0b, 1, 0, 0x03); pr_info("end_1.1.5\n"); } void rtl9300_do_rx_calibration_2_1(u32 sds_num) { pr_info("start_1.2.1 ForegroundOffsetCal_Manual\n"); /* Gray config endis to 1 */ rtl9300_sds_field_w(sds_num, 0x2f, 0x02, 2, 2, 0x01); /* ForegroundOffsetCal_Manual(auto mode) */ rtl9300_sds_field_w(sds_num, 0x2e, 0x01, 14, 14, 0x00); pr_info("end_1.2.1"); } void rtl9300_do_rx_calibration_2_2(int sds_num) { /* Force Rx-Run = 0 */ rtl9300_sds_field_w(sds_num, 0x2e, 0x15, 8, 8, 0x0); rtl930x_sds_rx_rst(sds_num, PHY_INTERFACE_MODE_10GBASER); } void rtl9300_do_rx_calibration_2_3(int sds_num) { u32 fgcal_binary, fgcal_gray; u32 offset_range; pr_info("start_1.2.3 Foreground Calibration\n"); while(1) { if (!(sds_num % 2)) rtl930x_write_sds_phy(sds_num, 0x1f, 0x2, 0x2f); else rtl930x_write_sds_phy(sds_num -1 , 0x1f, 0x2, 0x31); /* ##Page0x2E, Reg0x15[9], REG0_RX_EN_TEST=[1] */ rtl9300_sds_field_w(sds_num, 0x2e, 0x15, 9, 9, 0x1); /* ##Page0x21, Reg0x06[11 6], REG0_RX_DEBUG_SEL=[1 0 x x x x] */ rtl9300_sds_field_w(sds_num, 0x21, 0x06, 11, 6, 0x20); /* ##Page0x2F, Reg0x0C[5 0], REG0_COEF_SEL=[0 0 1 1 1 1] */ rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0xf); /* ##FGCAL read gray */ fgcal_gray = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 5, 0); /* ##Page0x2F, Reg0x0C[5 0], REG0_COEF_SEL=[0 0 1 1 1 0] */ rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0xe); /* ##FGCAL read binary */ fgcal_binary = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 5, 0); pr_info("%s: fgcal_gray: %d, fgcal_binary %d\n", __func__, fgcal_gray, fgcal_binary); offset_range = rtl9300_sds_field_r(sds_num, 0x2e, 0x15, 15, 14); if (fgcal_binary > 60 || fgcal_binary < 3) { if (offset_range == 3) { pr_info("%s: Foreground Calibration result marginal!", __func__); break; } else { offset_range++; rtl9300_sds_field_w(sds_num, 0x2e, 0x15, 15, 14, offset_range); rtl9300_do_rx_calibration_2_2(sds_num); } } else { break; } } pr_info("%s: end_1.2.3\n", __func__); } void rtl9300_do_rx_calibration_2(int sds) { rtl930x_sds_rx_rst(sds, PHY_INTERFACE_MODE_10GBASER); rtl9300_do_rx_calibration_2_1(sds); rtl9300_do_rx_calibration_2_2(sds); rtl9300_do_rx_calibration_2_3(sds); } void rtl9300_sds_rxcal_3_1(int sds_num, phy_interface_t phy_mode) { pr_info("start_1.3.1"); /* ##1.3.1 */ if (phy_mode != PHY_INTERFACE_MODE_10GBASER && phy_mode != PHY_INTERFACE_MODE_1000BASEX) rtl9300_sds_field_w(sds_num, 0x2e, 0xc, 8, 8, 0); rtl9300_sds_field_w(sds_num, 0x2e, 0x17, 7, 7, 0x0); rtl9300_sds_rxcal_leq_manual(sds_num, false, 0); pr_info("end_1.3.1"); } void rtl9300_sds_rxcal_3_2(int sds_num, phy_interface_t phy_mode) { u32 sum10 = 0, avg10, int10; int dac_long_cable_offset; bool eq_hold_enabled; int i; if (phy_mode == PHY_INTERFACE_MODE_10GBASER || phy_mode == PHY_INTERFACE_MODE_1000BASEX) { /* rtl9300_rxCaliConf_serdes_myParam */ dac_long_cable_offset = 3; eq_hold_enabled = true; } else { /* rtl9300_rxCaliConf_phy_myParam */ dac_long_cable_offset = 0; eq_hold_enabled = false; } if (phy_mode == PHY_INTERFACE_MODE_1000BASEX) pr_warn("%s: LEQ only valid for 10GR!\n", __func__); pr_info("start_1.3.2"); for(i = 0; i < 10; i++) { sum10 += rtl9300_sds_rxcal_leq_read(sds_num); mdelay(10); } avg10 = (sum10 / 10) + (((sum10 % 10) >= 5) ? 1 : 0); int10 = sum10 / 10; pr_info("sum10:%u, avg10:%u, int10:%u", sum10, avg10, int10); if (phy_mode == PHY_INTERFACE_MODE_10GBASER || phy_mode == PHY_INTERFACE_MODE_1000BASEX) { if (dac_long_cable_offset) { rtl9300_sds_rxcal_leq_offset_manual(sds_num, 1, dac_long_cable_offset); rtl9300_sds_field_w(sds_num, 0x2e, 0x17, 7, 7, eq_hold_enabled); if (phy_mode == PHY_INTERFACE_MODE_10GBASER) rtl9300_sds_rxcal_leq_manual(sds_num, true, avg10); } else { if (sum10 >= 5) { rtl9300_sds_rxcal_leq_offset_manual(sds_num, 1, 3); rtl9300_sds_field_w(sds_num, 0x2e, 0x17, 7, 7, 0x1); if (phy_mode == PHY_INTERFACE_MODE_10GBASER) rtl9300_sds_rxcal_leq_manual(sds_num, true, avg10); } else { rtl9300_sds_rxcal_leq_offset_manual(sds_num, 1, 0); rtl9300_sds_field_w(sds_num, 0x2e, 0x17, 7, 7, 0x1); if (phy_mode == PHY_INTERFACE_MODE_10GBASER) rtl9300_sds_rxcal_leq_manual(sds_num, true, avg10); } } } pr_info("Sds:%u LEQ = %u",sds_num, rtl9300_sds_rxcal_leq_read(sds_num)); pr_info("end_1.3.2"); } void rtl9300_do_rx_calibration_3(int sds_num, phy_interface_t phy_mode) { rtl9300_sds_rxcal_3_1(sds_num, phy_mode); if (phy_mode == PHY_INTERFACE_MODE_10GBASER || phy_mode == PHY_INTERFACE_MODE_1000BASEX) rtl9300_sds_rxcal_3_2(sds_num, phy_mode); } void rtl9300_do_rx_calibration_4_1(int sds_num) { u32 vth_list[2] = {0, 0}; u32 tap0_list[4] = {0, 0, 0, 0}; pr_info("start_1.4.1"); /* ##1.4.1 */ rtl9300_sds_rxcal_vth_manual(sds_num, false, vth_list); rtl9300_sds_rxcal_tap_manual(sds_num, 0, false, tap0_list); mdelay(200); pr_info("end_1.4.1"); } void rtl9300_do_rx_calibration_4_2(u32 sds_num) { u32 vth_list[2]; u32 tap_list[4]; pr_info("start_1.4.2"); rtl9300_sds_rxcal_vth_get(sds_num, vth_list); rtl9300_sds_rxcal_vth_manual(sds_num, true, vth_list); mdelay(100); rtl9300_sds_rxcal_tap_get(sds_num, 0, tap_list); rtl9300_sds_rxcal_tap_manual(sds_num, 0, true, tap_list); pr_info("end_1.4.2"); } void rtl9300_do_rx_calibration_4(u32 sds_num) { rtl9300_do_rx_calibration_4_1(sds_num); rtl9300_do_rx_calibration_4_2(sds_num); } void rtl9300_do_rx_calibration_5_2(u32 sds_num) { u32 tap1_list[4] = {0}; u32 tap2_list[4] = {0}; u32 tap3_list[4] = {0}; u32 tap4_list[4] = {0}; pr_info("start_1.5.2"); rtl9300_sds_rxcal_tap_manual(sds_num, 1, false, tap1_list); rtl9300_sds_rxcal_tap_manual(sds_num, 2, false, tap2_list); rtl9300_sds_rxcal_tap_manual(sds_num, 3, false, tap3_list); rtl9300_sds_rxcal_tap_manual(sds_num, 4, false, tap4_list); mdelay(30); pr_info("end_1.5.2"); } void rtl9300_do_rx_calibration_5(u32 sds_num, phy_interface_t phy_mode) { if (phy_mode == PHY_INTERFACE_MODE_10GBASER) /* dfeTap1_4Enable true */ rtl9300_do_rx_calibration_5_2(sds_num); } void rtl9300_do_rx_calibration_dfe_disable(u32 sds_num) { u32 tap1_list[4] = {0}; u32 tap2_list[4] = {0}; u32 tap3_list[4] = {0}; u32 tap4_list[4] = {0}; rtl9300_sds_rxcal_tap_manual(sds_num, 1, true, tap1_list); rtl9300_sds_rxcal_tap_manual(sds_num, 2, true, tap2_list); rtl9300_sds_rxcal_tap_manual(sds_num, 3, true, tap3_list); rtl9300_sds_rxcal_tap_manual(sds_num, 4, true, tap4_list); mdelay(10); } void rtl9300_do_rx_calibration(int sds, phy_interface_t phy_mode) { u32 latch_sts; rtl9300_do_rx_calibration_1(sds, phy_mode); rtl9300_do_rx_calibration_2(sds); rtl9300_do_rx_calibration_4(sds); rtl9300_do_rx_calibration_5(sds, phy_mode); mdelay(20); /* Do this only for 10GR mode, SDS active in mode 0x1a */ if (rtl9300_sds_field_r(sds, 0x1f, 9, 11, 7) == 0x1a) { pr_info("%s: SDS enabled\n", __func__); latch_sts = rtl9300_sds_field_r(sds, 0x4, 1, 2, 2); mdelay(1); latch_sts = rtl9300_sds_field_r(sds, 0x4, 1, 2, 2); if (latch_sts) { rtl9300_do_rx_calibration_dfe_disable(sds); rtl9300_do_rx_calibration_4(sds); rtl9300_do_rx_calibration_5(sds, phy_mode); } } } int rtl9300_sds_sym_err_reset(int sds_num, phy_interface_t phy_mode) { switch (phy_mode) { case PHY_INTERFACE_MODE_XGMII: break; case PHY_INTERFACE_MODE_10GBASER: /* Read twice to clear */ rtl930x_read_sds_phy(sds_num, 5, 1); rtl930x_read_sds_phy(sds_num, 5, 1); break; case PHY_INTERFACE_MODE_1000BASEX: rtl9300_sds_field_w(sds_num, 0x1, 24, 2, 0, 0); rtl9300_sds_field_w(sds_num, 0x1, 3, 15, 8, 0); rtl9300_sds_field_w(sds_num, 0x1, 2, 15, 0, 0); break; default: pr_info("%s unsupported phy mode\n", __func__); return -1; } return 0; } u32 rtl9300_sds_sym_err_get(int sds_num, phy_interface_t phy_mode) { u32 v = 0; switch (phy_mode) { case PHY_INTERFACE_MODE_XGMII: break; case PHY_INTERFACE_MODE_10GBASER: v = rtl930x_read_sds_phy(sds_num, 5, 1); return v & 0xff; default: pr_info("%s unsupported PHY-mode\n", __func__); } return v; } int rtl9300_sds_check_calibration(int sds_num, phy_interface_t phy_mode) { u32 errors1, errors2; rtl9300_sds_sym_err_reset(sds_num, phy_mode); rtl9300_sds_sym_err_reset(sds_num, phy_mode); /* Count errors during 1ms */ errors1 = rtl9300_sds_sym_err_get(sds_num, phy_mode); mdelay(1); errors2 = rtl9300_sds_sym_err_get(sds_num, phy_mode); switch (phy_mode) { case PHY_INTERFACE_MODE_XGMII: if ((errors2 - errors1 > 100) || (errors1 >= 0xffff00) || (errors2 >= 0xffff00)) { pr_info("%s XSGMII error rate too high\n", __func__); return 1; } break; case PHY_INTERFACE_MODE_10GBASER: if (errors2 > 0) { pr_info("%s 10GBASER error rate too high\n", __func__); return 1; } break; default: return 1; } return 0; } void rtl9300_phy_enable_10g_1g(int sds_num) { u32 v; /* Enable 1GBit PHY */ v = rtl930x_read_sds_phy(sds_num, PHY_PAGE_2, PHY_CTRL_REG); pr_info("%s 1gbit phy: %08x\n", __func__, v); v &= ~BIT(PHY_POWER_BIT); rtl930x_write_sds_phy(sds_num, PHY_PAGE_2, PHY_CTRL_REG, v); pr_info("%s 1gbit phy enabled: %08x\n", __func__, v); /* Enable 10GBit PHY */ v = rtl930x_read_sds_phy(sds_num, PHY_PAGE_4, PHY_CTRL_REG); pr_info("%s 10gbit phy: %08x\n", __func__, v); v &= ~BIT(PHY_POWER_BIT); rtl930x_write_sds_phy(sds_num, PHY_PAGE_4, PHY_CTRL_REG, v); pr_info("%s 10gbit phy after: %08x\n", __func__, v); /* dal_longan_construct_mac_default_10gmedia_fiber */ v = rtl930x_read_sds_phy(sds_num, 0x1f, 11); pr_info("%s set medium: %08x\n", __func__, v); v |= BIT(1); rtl930x_write_sds_phy(sds_num, 0x1f, 11, v); pr_info("%s set medium after: %08x\n", __func__, v); } #define RTL930X_MAC_FORCE_MODE_CTRL (0xCA1C) /* phy_mode = PHY_INTERFACE_MODE_10GBASER, sds_mode = 0x1a */ int rtl9300_serdes_setup(int sds_num, phy_interface_t phy_mode) { int sds_mode; int calib_tries = 0; switch (phy_mode) { case PHY_INTERFACE_MODE_HSGMII: sds_mode = 0x12; break; case PHY_INTERFACE_MODE_1000BASEX: sds_mode = 0x04; break; case PHY_INTERFACE_MODE_XGMII: sds_mode = 0x10; break; case PHY_INTERFACE_MODE_10GBASER: sds_mode = 0x1a; break; case PHY_INTERFACE_MODE_USXGMII: sds_mode = 0x0d; break; default: pr_err("%s: unknown serdes mode: %s\n", __func__, phy_modes(phy_mode)); return -EINVAL; } /* Maybe use dal_longan_sds_init */ /* dal_longan_construct_serdesConfig_init */ /* Serdes Construct */ rtl9300_phy_enable_10g_1g(sds_num); /* Set Serdes Mode */ rtl9300_sds_set(sds_num, 0x1a); /* 0x1b: RTK_MII_10GR1000BX_AUTO */ /* Do RX calibration */ do { rtl9300_do_rx_calibration(sds_num, phy_mode); calib_tries++; mdelay(50); } while (rtl9300_sds_check_calibration(sds_num, phy_mode) && calib_tries < 3); return 0; } typedef struct { u8 page; u8 reg; u16 data; } sds_config; sds_config rtl9300_a_sds_10gr_lane0[] = { /* 1G */ {0x00, 0x0E, 0x3053}, {0x01, 0x14, 0x0100}, {0x21, 0x03, 0x8206}, {0x21, 0x05, 0x40B0}, {0x21, 0x06, 0x0010}, {0x21, 0x07, 0xF09F}, {0x21, 0x0C, 0x0007}, {0x21, 0x0D, 0x6009}, {0x21, 0x0E, 0x0000}, {0x21, 0x0F, 0x0008}, {0x24, 0x00, 0x0668}, {0x24, 0x02, 0xD020}, {0x24, 0x06, 0xC000}, {0x24, 0x0B, 0x1892}, {0x24, 0x0F, 0xFFDF}, {0x24, 0x12, 0x03C4}, {0x24, 0x13, 0x027F}, {0x24, 0x14, 0x1311}, {0x24, 0x16, 0x00C9}, {0x24, 0x17, 0xA100}, {0x24, 0x1A, 0x0001}, {0x24, 0x1C, 0x0400}, {0x25, 0x01, 0x0300}, {0x25, 0x02, 0x1017}, {0x25, 0x03, 0xFFDF}, {0x25, 0x05, 0x7F7C}, {0x25, 0x07, 0x8100}, {0x25, 0x08, 0x0001}, {0x25, 0x09, 0xFFD4}, {0x25, 0x0A, 0x7C2F}, {0x25, 0x0E, 0x003F}, {0x25, 0x0F, 0x0121}, {0x25, 0x10, 0x0020}, {0x25, 0x11, 0x8840}, {0x2B, 0x13, 0x0050}, {0x2B, 0x18, 0x8E88}, {0x2B, 0x19, 0x4902}, {0x2B, 0x1D, 0x2501}, {0x2D, 0x13, 0x0050}, {0x2D, 0x18, 0x8E88}, {0x2D, 0x19, 0x4902}, {0x2D, 0x1D, 0x2641}, {0x2F, 0x13, 0x0050}, {0x2F, 0x18, 0x8E88}, {0x2F, 0x19, 0x4902}, {0x2F, 0x1D, 0x66E1}, /* 3.125G */ {0x28, 0x00, 0x0668}, {0x28, 0x02, 0xD020}, {0x28, 0x06, 0xC000}, {0x28, 0x0B, 0x1892}, {0x28, 0x0F, 0xFFDF}, {0x28, 0x12, 0x01C4}, {0x28, 0x13, 0x027F}, {0x28, 0x14, 0x1311}, {0x28, 0x16, 0x00C9}, {0x28, 0x17, 0xA100}, {0x28, 0x1A, 0x0001}, {0x28, 0x1C, 0x0400}, {0x29, 0x01, 0x0300}, {0x29, 0x02, 0x1017}, {0x29, 0x03, 0xFFDF}, {0x29, 0x05, 0x7F7C}, {0x29, 0x07, 0x8100}, {0x29, 0x08, 0x0001}, {0x29, 0x09, 0xFFD4}, {0x29, 0x0A, 0x7C2F}, {0x29, 0x0E, 0x003F}, {0x29, 0x0F, 0x0121}, {0x29, 0x10, 0x0020}, {0x29, 0x11, 0x8840}, /* 10G */ {0x06, 0x0D, 0x0F00}, {0x06, 0x00, 0x0000}, {0x06, 0x01, 0xC800}, {0x21, 0x03, 0x8206}, {0x21, 0x05, 0x40B0}, {0x21, 0x06, 0x0010}, {0x21, 0x07, 0xF09F}, {0x21, 0x0C, 0x0007}, {0x21, 0x0D, 0x6009}, {0x21, 0x0E, 0x0000}, {0x21, 0x0F, 0x0008}, {0x2E, 0x00, 0xA668}, {0x2E, 0x02, 0xD020}, {0x2E, 0x06, 0xC000}, {0x2E, 0x0B, 0x1892}, {0x2E, 0x0F, 0xFFDF}, {0x2E, 0x11, 0x8280}, {0x2E, 0x12, 0x0044}, {0x2E, 0x13, 0x027F}, {0x2E, 0x14, 0x1311}, {0x2E, 0x17, 0xA100}, {0x2E, 0x1A, 0x0001}, {0x2E, 0x1C, 0x0400}, {0x2F, 0x01, 0x0300}, {0x2F, 0x02, 0x1217}, {0x2F, 0x03, 0xFFDF}, {0x2F, 0x05, 0x7F7C}, {0x2F, 0x07, 0x80C4}, {0x2F, 0x08, 0x0001}, {0x2F, 0x09, 0xFFD4}, {0x2F, 0x0A, 0x7C2F}, {0x2F, 0x0E, 0x003F}, {0x2F, 0x0F, 0x0121}, {0x2F, 0x10, 0x0020}, {0x2F, 0x11, 0x8840}, {0x2F, 0x14, 0xE008}, {0x2B, 0x13, 0x0050}, {0x2B, 0x18, 0x8E88}, {0x2B, 0x19, 0x4902}, {0x2B, 0x1D, 0x2501}, {0x2D, 0x13, 0x0050}, {0x2D, 0x17, 0x4109}, {0x2D, 0x18, 0x8E88}, {0x2D, 0x19, 0x4902}, {0x2D, 0x1C, 0x1109}, {0x2D, 0x1D, 0x2641}, {0x2F, 0x13, 0x0050}, {0x2F, 0x18, 0x8E88}, {0x2F, 0x19, 0x4902}, {0x2F, 0x1D, 0x76E1}, }; sds_config rtl9300_a_sds_10gr_lane1[] = { /* 1G */ {0x00, 0x0E, 0x3053}, {0x01, 0x14, 0x0100}, {0x21, 0x03, 0x8206}, {0x21, 0x06, 0x0010}, {0x21, 0x07, 0xF09F}, {0x21, 0x0A, 0x0003}, {0x21, 0x0B, 0x0005}, {0x21, 0x0C, 0x0007}, {0x21, 0x0D, 0x6009}, {0x21, 0x0E, 0x0000}, {0x21, 0x0F, 0x0008}, {0x24, 0x00, 0x0668}, {0x24, 0x02, 0xD020}, {0x24, 0x06, 0xC000}, {0x24, 0x0B, 0x1892}, {0x24, 0x0F, 0xFFDF}, {0x24, 0x12, 0x03C4}, {0x24, 0x13, 0x027F}, {0x24, 0x14, 0x1311}, {0x24, 0x16, 0x00C9}, {0x24, 0x17, 0xA100}, {0x24, 0x1A, 0x0001}, {0x24, 0x1C, 0x0400}, {0x25, 0x00, 0x820F}, {0x25, 0x01, 0x0300}, {0x25, 0x02, 0x1017}, {0x25, 0x03, 0xFFDF}, {0x25, 0x05, 0x7F7C}, {0x25, 0x07, 0x8100}, {0x25, 0x08, 0x0001}, {0x25, 0x09, 0xFFD4}, {0x25, 0x0A, 0x7C2F}, {0x25, 0x0E, 0x003F}, {0x25, 0x0F, 0x0121}, {0x25, 0x10, 0x0020}, {0x25, 0x11, 0x8840}, {0x2B, 0x13, 0x3D87}, {0x2B, 0x14, 0x3108}, {0x2D, 0x13, 0x3C87}, {0x2D, 0x14, 0x1808}, /* 3.125G */ {0x28, 0x00, 0x0668}, {0x28, 0x02, 0xD020}, {0x28, 0x06, 0xC000}, {0x28, 0x0B, 0x1892}, {0x28, 0x0F, 0xFFDF}, {0x28, 0x12, 0x01C4}, {0x28, 0x13, 0x027F}, {0x28, 0x14, 0x1311}, {0x28, 0x16, 0x00C9}, {0x28, 0x17, 0xA100}, {0x28, 0x1A, 0x0001}, {0x28, 0x1C, 0x0400}, {0x29, 0x00, 0x820F}, {0x29, 0x01, 0x0300}, {0x29, 0x02, 0x1017}, {0x29, 0x03, 0xFFDF}, {0x29, 0x05, 0x7F7C}, {0x29, 0x07, 0x8100}, {0x29, 0x08, 0x0001}, {0x29, 0x0A, 0x7C2F}, {0x29, 0x0E, 0x003F}, {0x29, 0x0F, 0x0121}, {0x29, 0x10, 0x0020}, {0x29, 0x11, 0x8840}, /* 10G */ {0x06, 0x0D, 0x0F00}, {0x06, 0x00, 0x0000}, {0x06, 0x01, 0xC800}, {0x21, 0x03, 0x8206}, {0x21, 0x05, 0x40B0}, {0x21, 0x06, 0x0010}, {0x21, 0x07, 0xF09F}, {0x21, 0x0A, 0x0003}, {0x21, 0x0B, 0x0005}, {0x21, 0x0C, 0x0007}, {0x21, 0x0D, 0x6009}, {0x21, 0x0E, 0x0000}, {0x21, 0x0F, 0x0008}, {0x2E, 0x00, 0xA668}, {0x2E, 0x02, 0xD020}, {0x2E, 0x06, 0xC000}, {0x2E, 0x0B, 0x1892}, {0x2E, 0x0F, 0xFFDF}, {0x2E, 0x11, 0x8280}, {0x2E, 0x12, 0x0044}, {0x2E, 0x13, 0x027F}, {0x2E, 0x14, 0x1311}, {0x2E, 0x17, 0xA100}, {0x2E, 0x1A, 0x0001}, {0x2E, 0x1C, 0x0400}, {0x2F, 0x00, 0x820F}, {0x2F, 0x01, 0x0300}, {0x2F, 0x02, 0x1217}, {0x2F, 0x03, 0xFFDF}, {0x2F, 0x05, 0x7F7C}, {0x2F, 0x07, 0x80C4}, {0x2F, 0x08, 0x0001}, {0x2F, 0x09, 0xFFD4}, {0x2F, 0x0A, 0x7C2F}, {0x2F, 0x0E, 0x003F}, {0x2F, 0x0F, 0x0121}, {0x2F, 0x10, 0x0020}, {0x2F, 0x11, 0x8840}, {0x2B, 0x13, 0x3D87}, {0x2B, 0x14, 0x3108}, {0x2D, 0x13, 0x3C87}, {0x2D, 0x14, 0x1808}, }; int rtl9300_sds_cmu_band_get(int sds) { u32 page; u32 en; u32 cmu_band; /* page = rtl9300_sds_cmu_page_get(sds); */ page = 0x25; /* 10GR and 1000BX */ sds = (sds % 2) ? (sds - 1) : (sds); rtl9300_sds_field_w(sds, page, 0x1c, 15, 15, 1); rtl9300_sds_field_w(sds + 1, page, 0x1c, 15, 15, 1); en = rtl9300_sds_field_r(sds, page, 27, 1, 1); if(!en) { /* Auto mode */ rtl930x_write_sds_phy(sds, 0x1f, 0x02, 31); cmu_band = rtl9300_sds_field_r(sds, 0x1f, 0x15, 5, 1); } else { cmu_band = rtl9300_sds_field_r(sds, page, 30, 4, 0); } return cmu_band; } int rtl9300_configure_serdes(struct phy_device *phydev) { struct device *dev = &phydev->mdio.dev; int phy_addr = phydev->mdio.addr; struct device_node *dn; u32 sds_num = 0; int sds_mode, calib_tries = 0, phy_mode = PHY_INTERFACE_MODE_10GBASER, i; if (dev->of_node) { dn = dev->of_node; if (of_property_read_u32(dn, "sds", &sds_num)) sds_num = -1; pr_info("%s: Port %d, SerDes is %d\n", __func__, phy_addr, sds_num); } else { dev_err(dev, "No DT node.\n"); return -EINVAL; } if (sds_num < 0) return 0; if (phy_mode != PHY_INTERFACE_MODE_10GBASER) /* TODO: for now we only patch 10GR SerDes */ return 0; switch (phy_mode) { case PHY_INTERFACE_MODE_HSGMII: sds_mode = 0x12; break; case PHY_INTERFACE_MODE_1000BASEX: sds_mode = 0x04; break; case PHY_INTERFACE_MODE_XGMII: sds_mode = 0x10; break; case PHY_INTERFACE_MODE_10GBASER: sds_mode = 0x1a; break; case PHY_INTERFACE_MODE_USXGMII: sds_mode = 0x0d; break; default: pr_err("%s: unknown serdes mode: %s\n", __func__, phy_modes(phy_mode)); return -EINVAL; } pr_info("%s CMU BAND is %d\n", __func__, rtl9300_sds_cmu_band_get(sds_num)); /* Turn Off Serdes */ rtl9300_sds_rst(sds_num, 0x1f); pr_info("%s PATCHING SerDes %d\n", __func__, sds_num); if (sds_num % 2) { for (i = 0; i < sizeof(rtl9300_a_sds_10gr_lane1) / sizeof(sds_config); ++i) { rtl930x_write_sds_phy(sds_num, rtl9300_a_sds_10gr_lane1[i].page, rtl9300_a_sds_10gr_lane1[i].reg, rtl9300_a_sds_10gr_lane1[i].data); } } else { for (i = 0; i < sizeof(rtl9300_a_sds_10gr_lane0) / sizeof(sds_config); ++i) { rtl930x_write_sds_phy(sds_num, rtl9300_a_sds_10gr_lane0[i].page, rtl9300_a_sds_10gr_lane0[i].reg, rtl9300_a_sds_10gr_lane0[i].data); } } rtl9300_phy_enable_10g_1g(sds_num); /* Disable MAC */ sw_w32_mask(0, 1, RTL930X_MAC_FORCE_MODE_CTRL); mdelay(20); /* ----> dal_longan_sds_mode_set */ pr_info("%s: Configuring RTL9300 SERDES %d, mode %02x\n", __func__, sds_num, sds_mode); /* Configure link to MAC */ rtl9300_serdes_mac_link_config(sds_num, true, true); /* MAC Construct */ /* Disable MAC */ sw_w32_mask(0, 1, RTL930X_MAC_FORCE_MODE_CTRL); mdelay(20); rtl9300_force_sds_mode(sds_num, PHY_INTERFACE_MODE_NA); /* Re-Enable MAC */ sw_w32_mask(1, 0, RTL930X_MAC_FORCE_MODE_CTRL); rtl9300_force_sds_mode(sds_num, phy_mode); /* Do RX calibration */ do { rtl9300_do_rx_calibration(sds_num, phy_mode); calib_tries++; mdelay(50); } while (rtl9300_sds_check_calibration(sds_num, phy_mode) && calib_tries < 3); if (calib_tries >= 3) pr_err("%s CALIBTRATION FAILED\n", __func__); rtl9300_sds_tx_config(sds_num, phy_mode); /* The clock needs only to be configured on the FPGA implementation */ return 0; } void rtl9310_sds_field_w(int sds, u32 page, u32 reg, int end_bit, int start_bit, u32 v) { int l = end_bit - start_bit + 1; u32 data = v; if (l < 32) { u32 mask = BIT(l) - 1; data = rtl930x_read_sds_phy(sds, page, reg); data &= ~(mask << start_bit); data |= (v & mask) << start_bit; } rtl931x_write_sds_phy(sds, page, reg, data); } u32 rtl9310_sds_field_r(int sds, u32 page, u32 reg, int end_bit, int start_bit) { int l = end_bit - start_bit + 1; u32 v = rtl931x_read_sds_phy(sds, page, reg); if (l >= 32) return v; return (v >> start_bit) & (BIT(l) - 1); } static void rtl931x_sds_rst(u32 sds) { u32 o, v, o_mode; int shift = ((sds & 0x3) << 3); /* TODO: We need to lock this! */ o = sw_r32(RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR); v = o | BIT(sds); sw_w32(v, RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR); o_mode = sw_r32(RTL931X_SERDES_MODE_CTRL + 4 * (sds >> 2)); v = BIT(7) | 0x1F; sw_w32_mask(0xff << shift, v << shift, RTL931X_SERDES_MODE_CTRL + 4 * (sds >> 2)); sw_w32(o_mode, RTL931X_SERDES_MODE_CTRL + 4 * (sds >> 2)); sw_w32(o, RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR); } static void rtl931x_symerr_clear(u32 sds, phy_interface_t mode) { u32 i; u32 xsg_sdsid_0, xsg_sdsid_1; switch (mode) { case PHY_INTERFACE_MODE_NA: break; case PHY_INTERFACE_MODE_XGMII: if (sds < 2) xsg_sdsid_0 = sds; else xsg_sdsid_0 = (sds - 1) * 2; xsg_sdsid_1 = xsg_sdsid_0 + 1; for (i = 0; i < 4; ++i) { rtl9310_sds_field_w(xsg_sdsid_0, 0x1, 24, 2, 0, i); rtl9310_sds_field_w(xsg_sdsid_0, 0x1, 3, 15, 8, 0x0); rtl9310_sds_field_w(xsg_sdsid_0, 0x1, 2, 15, 0, 0x0); } for (i = 0; i < 4; ++i) { rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 24, 2, 0, i); rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 3, 15, 8, 0x0); rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 2, 15, 0, 0x0); } rtl9310_sds_field_w(xsg_sdsid_0, 0x1, 0, 15, 0, 0x0); rtl9310_sds_field_w(xsg_sdsid_0, 0x1, 1, 15, 8, 0x0); rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 0, 15, 0, 0x0); rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 1, 15, 8, 0x0); break; default: break; } return; } static u32 rtl931x_get_analog_sds(u32 sds) { u32 sds_map[] = { 0, 1, 2, 3, 6, 7, 10, 11, 14, 15, 18, 19, 22, 23 }; if (sds < 14) return sds_map[sds]; return sds; } void rtl931x_sds_fiber_disable(u32 sds) { u32 v = 0x3F; u32 asds = rtl931x_get_analog_sds(sds); rtl9310_sds_field_w(asds, 0x1F, 0x9, 11, 6, v); } static void rtl931x_sds_fiber_mode_set(u32 sds, phy_interface_t mode) { u32 val, asds = rtl931x_get_analog_sds(sds); /* clear symbol error count before changing mode */ rtl931x_symerr_clear(sds, mode); val = 0x9F; sw_w32(val, RTL931X_SERDES_MODE_CTRL + 4 * (sds >> 2)); switch (mode) { case PHY_INTERFACE_MODE_SGMII: val = 0x5; break; case PHY_INTERFACE_MODE_1000BASEX: /* serdes mode FIBER1G */ val = 0x9; break; case PHY_INTERFACE_MODE_10GBASER: case PHY_INTERFACE_MODE_10GKR: val = 0x35; break; /* case MII_10GR1000BX_AUTO: val = 0x39; break; */ case PHY_INTERFACE_MODE_USXGMII: val = 0x1B; break; default: val = 0x25; } pr_info("%s writing analog SerDes Mode value %02x\n", __func__, val); rtl9310_sds_field_w(asds, 0x1F, 0x9, 11, 6, val); return; } static int rtl931x_sds_cmu_page_get(phy_interface_t mode) { switch (mode) { case PHY_INTERFACE_MODE_SGMII: case PHY_INTERFACE_MODE_1000BASEX: /* MII_1000BX_FIBER / 100BX_FIBER / 1000BX100BX_AUTO */ return 0x24; case PHY_INTERFACE_MODE_HSGMII: case PHY_INTERFACE_MODE_2500BASEX: /* MII_2500Base_X: */ return 0x28; /* case MII_HISGMII_5G: */ /* return 0x2a; */ case PHY_INTERFACE_MODE_QSGMII: return 0x2a; /* Code also has 0x34 */ case PHY_INTERFACE_MODE_XAUI: /* MII_RXAUI_LITE: */ return 0x2c; case PHY_INTERFACE_MODE_XGMII: /* MII_XSGMII */ case PHY_INTERFACE_MODE_10GKR: case PHY_INTERFACE_MODE_10GBASER: /* MII_10GR */ return 0x2e; default: return -1; } return -1; } static void rtl931x_cmu_type_set(u32 asds, phy_interface_t mode, int chiptype) { int cmu_type = 0; /* Clock Management Unit */ u32 cmu_page = 0; u32 frc_cmu_spd; u32 evenSds; u32 lane, frc_lc_mode_bitnum, frc_lc_mode_val_bitnum; switch (mode) { case PHY_INTERFACE_MODE_NA: case PHY_INTERFACE_MODE_10GKR: case PHY_INTERFACE_MODE_XGMII: case PHY_INTERFACE_MODE_10GBASER: case PHY_INTERFACE_MODE_USXGMII: return; /* case MII_10GR1000BX_AUTO: if (chiptype) rtl9310_sds_field_w(asds, 0x24, 0xd, 14, 14, 0); return; */ case PHY_INTERFACE_MODE_QSGMII: cmu_type = 1; frc_cmu_spd = 0; break; case PHY_INTERFACE_MODE_HSGMII: cmu_type = 1; frc_cmu_spd = 1; break; case PHY_INTERFACE_MODE_1000BASEX: cmu_type = 1; frc_cmu_spd = 0; break; /* case MII_1000BX100BX_AUTO: cmu_type = 1; frc_cmu_spd = 0; break; */ case PHY_INTERFACE_MODE_SGMII: cmu_type = 1; frc_cmu_spd = 0; break; case PHY_INTERFACE_MODE_2500BASEX: cmu_type = 1; frc_cmu_spd = 1; break; default: pr_info("SerDes %d mode is invalid\n", asds); return; } if (cmu_type == 1) cmu_page = rtl931x_sds_cmu_page_get(mode); lane = asds % 2; if (!lane) { frc_lc_mode_bitnum = 4; frc_lc_mode_val_bitnum = 5; } else { frc_lc_mode_bitnum = 6; frc_lc_mode_val_bitnum = 7; } evenSds = asds - lane; pr_info("%s: cmu_type %0d cmu_page %x frc_cmu_spd %d lane %d asds %d\n", __func__, cmu_type, cmu_page, frc_cmu_spd, lane, asds); if (cmu_type == 1) { pr_info("%s A CMU page 0x28 0x7 %08x\n", __func__, rtl931x_read_sds_phy(asds, 0x28, 0x7)); rtl9310_sds_field_w(asds, cmu_page, 0x7, 15, 15, 0); pr_info("%s B CMU page 0x28 0x7 %08x\n", __func__, rtl931x_read_sds_phy(asds, 0x28, 0x7)); if (chiptype) { rtl9310_sds_field_w(asds, cmu_page, 0xd, 14, 14, 0); } rtl9310_sds_field_w(evenSds, 0x20, 0x12, 3, 2, 0x3); rtl9310_sds_field_w(evenSds, 0x20, 0x12, frc_lc_mode_bitnum, frc_lc_mode_bitnum, 1); rtl9310_sds_field_w(evenSds, 0x20, 0x12, frc_lc_mode_val_bitnum, frc_lc_mode_val_bitnum, 0); rtl9310_sds_field_w(evenSds, 0x20, 0x12, 12, 12, 1); rtl9310_sds_field_w(evenSds, 0x20, 0x12, 15, 13, frc_cmu_spd); } pr_info("%s CMU page 0x28 0x7 %08x\n", __func__, rtl931x_read_sds_phy(asds, 0x28, 0x7)); return; } static void rtl931x_sds_rx_rst(u32 sds) { u32 asds = rtl931x_get_analog_sds(sds); if (sds < 2) return; rtl931x_write_sds_phy(asds, 0x2e, 0x12, 0x2740); rtl931x_write_sds_phy(asds, 0x2f, 0x0, 0x0); rtl931x_write_sds_phy(asds, 0x2f, 0x2, 0x2010); rtl931x_write_sds_phy(asds, 0x20, 0x0, 0xc10); rtl931x_write_sds_phy(asds, 0x2e, 0x12, 0x27c0); rtl931x_write_sds_phy(asds, 0x2f, 0x0, 0xc000); rtl931x_write_sds_phy(asds, 0x2f, 0x2, 0x6010); rtl931x_write_sds_phy(asds, 0x20, 0x0, 0xc30); mdelay(50); } static void rtl931x_sds_disable(u32 sds) { u32 v = 0x1f; v |= BIT(7); sw_w32(v, RTL931X_SERDES_MODE_CTRL + (sds >> 2) * 4); } static void rtl931x_sds_mii_mode_set(u32 sds, phy_interface_t mode) { u32 val; switch (mode) { case PHY_INTERFACE_MODE_QSGMII: val = 0x6; break; case PHY_INTERFACE_MODE_XGMII: val = 0x10; /* serdes mode XSGMII */ break; case PHY_INTERFACE_MODE_USXGMII: case PHY_INTERFACE_MODE_2500BASEX: val = 0xD; break; case PHY_INTERFACE_MODE_HSGMII: val = 0x12; break; case PHY_INTERFACE_MODE_SGMII: val = 0x2; break; default: return; } val |= (1 << 7); sw_w32(val, RTL931X_SERDES_MODE_CTRL + 4 * (sds >> 2)); } static sds_config sds_config_10p3125g_type1[] = { { 0x2E, 0x00, 0x0107 }, { 0x2E, 0x01, 0x01A3 }, { 0x2E, 0x02, 0x6A24 }, { 0x2E, 0x03, 0xD10D }, { 0x2E, 0x04, 0x8000 }, { 0x2E, 0x05, 0xA17E }, { 0x2E, 0x06, 0xE31D }, { 0x2E, 0x07, 0x800E }, { 0x2E, 0x08, 0x0294 }, { 0x2E, 0x09, 0x0CE4 }, { 0x2E, 0x0A, 0x7FC8 }, { 0x2E, 0x0B, 0xE0E7 }, { 0x2E, 0x0C, 0x0200 }, { 0x2E, 0x0D, 0xDF80 }, { 0x2E, 0x0E, 0x0000 }, { 0x2E, 0x0F, 0x1FC2 }, { 0x2E, 0x10, 0x0C3F }, { 0x2E, 0x11, 0x0000 }, { 0x2E, 0x12, 0x27C0 }, { 0x2E, 0x13, 0x7E1D }, { 0x2E, 0x14, 0x1300 }, { 0x2E, 0x15, 0x003F }, { 0x2E, 0x16, 0xBE7F }, { 0x2E, 0x17, 0x0090 }, { 0x2E, 0x18, 0x0000 }, { 0x2E, 0x19, 0x4000 }, { 0x2E, 0x1A, 0x0000 }, { 0x2E, 0x1B, 0x8000 }, { 0x2E, 0x1C, 0x011F }, { 0x2E, 0x1D, 0x0000 }, { 0x2E, 0x1E, 0xC8FF }, { 0x2E, 0x1F, 0x0000 }, { 0x2F, 0x00, 0xC000 }, { 0x2F, 0x01, 0xF000 }, { 0x2F, 0x02, 0x6010 }, { 0x2F, 0x12, 0x0EE7 }, { 0x2F, 0x13, 0x0000 } }; static sds_config sds_config_10p3125g_cmu_type1[] = { { 0x2F, 0x03, 0x4210 }, { 0x2F, 0x04, 0x0000 }, { 0x2F, 0x05, 0x0019 }, { 0x2F, 0x06, 0x18A6 }, { 0x2F, 0x07, 0x2990 }, { 0x2F, 0x08, 0xFFF4 }, { 0x2F, 0x09, 0x1F08 }, { 0x2F, 0x0A, 0x0000 }, { 0x2F, 0x0B, 0x8000 }, { 0x2F, 0x0C, 0x4224 }, { 0x2F, 0x0D, 0x0000 }, { 0x2F, 0x0E, 0x0000 }, { 0x2F, 0x0F, 0xA470 }, { 0x2F, 0x10, 0x8000 }, { 0x2F, 0x11, 0x037B } }; void rtl931x_sds_init(u32 sds, phy_interface_t mode) { u32 board_sds_tx_type1[] = { 0x01c3, 0x01c3, 0x01c3, 0x01a3, 0x01a3, 0x01a3, 0x0143, 0x0143, 0x0143, 0x0143, 0x0163, 0x0163, }; u32 board_sds_tx[] = { 0x1a00, 0x1a00, 0x0200, 0x0200, 0x0200, 0x0200, 0x01a3, 0x01a3, 0x01a3, 0x01a3, 0x01e3, 0x01e3 }; u32 board_sds_tx2[] = { 0x0dc0, 0x01c0, 0x0200, 0x0180, 0x0160, 0x0123, 0x0123, 0x0163, 0x01a3, 0x01a0, 0x01c3, 0x09c3, }; u32 asds, dSds, ori, model_info, val; int chiptype = 0; asds = rtl931x_get_analog_sds(sds); if (sds > 13) return; pr_info("%s: set sds %d to mode %d\n", __func__, sds, mode); val = rtl9310_sds_field_r(asds, 0x1F, 0x9, 11, 6); pr_info("%s: fibermode %08X stored mode 0x%x analog SDS %d", __func__, rtl931x_read_sds_phy(asds, 0x1f, 0x9), val, asds); pr_info("%s: SGMII mode %08X in 0x24 0x9 analog SDS %d", __func__, rtl931x_read_sds_phy(asds, 0x24, 0x9), asds); pr_info("%s: CMU mode %08X stored even SDS %d", __func__, rtl931x_read_sds_phy(asds & ~1, 0x20, 0x12), asds & ~1); pr_info("%s: serdes_mode_ctrl %08X", __func__, RTL931X_SERDES_MODE_CTRL + 4 * (sds >> 2)); pr_info("%s CMU page 0x24 0x7 %08x\n", __func__, rtl931x_read_sds_phy(asds, 0x24, 0x7)); pr_info("%s CMU page 0x26 0x7 %08x\n", __func__, rtl931x_read_sds_phy(asds, 0x26, 0x7)); pr_info("%s CMU page 0x28 0x7 %08x\n", __func__, rtl931x_read_sds_phy(asds, 0x28, 0x7)); pr_info("%s XSG page 0x0 0xe %08x\n", __func__, rtl931x_read_sds_phy(dSds, 0x0, 0xe)); pr_info("%s XSG2 page 0x0 0xe %08x\n", __func__, rtl931x_read_sds_phy(dSds + 1, 0x0, 0xe)); model_info = sw_r32(RTL93XX_MODEL_NAME_INFO); if ((model_info >> 4) & 0x1) { pr_info("detected chiptype 1\n"); chiptype = 1; } else { pr_info("detected chiptype 0\n"); } if (sds < 2) dSds = sds; else dSds = (sds - 1) * 2; pr_info("%s: 2.5gbit %08X dsds %d", __func__, rtl931x_read_sds_phy(dSds, 0x1, 0x14), dSds); pr_info("%s: RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR 0x%08X\n", __func__, sw_r32(RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR)); ori = sw_r32(RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR); val = ori | (1 << sds); sw_w32(val, RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR); switch (mode) { case PHY_INTERFACE_MODE_NA: break; case PHY_INTERFACE_MODE_XGMII: /* MII_XSGMII */ if (chiptype) { u32 xsg_sdsid_1; xsg_sdsid_1 = dSds + 1; /* fifo inv clk */ rtl9310_sds_field_w(dSds, 0x1, 0x1, 7, 4, 0xf); rtl9310_sds_field_w(dSds, 0x1, 0x1, 3, 0, 0xf); rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 0x1, 7, 4, 0xf); rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 0x1, 3, 0, 0xf); } rtl9310_sds_field_w(dSds, 0x0, 0xE, 12, 12, 1); rtl9310_sds_field_w(dSds + 1, 0x0, 0xE, 12, 12, 1); break; case PHY_INTERFACE_MODE_USXGMII: /* MII_USXGMII_10GSXGMII/10GDXGMII/10GQXGMII: */ u32 i, evenSds; u32 op_code = 0x6003; if (chiptype) { rtl9310_sds_field_w(asds, 0x6, 0x2, 12, 12, 1); for (i = 0; i < sizeof(sds_config_10p3125g_type1) / sizeof(sds_config); ++i) { rtl931x_write_sds_phy(asds, sds_config_10p3125g_type1[i].page - 0x4, sds_config_10p3125g_type1[i].reg, sds_config_10p3125g_type1[i].data); } evenSds = asds - (asds % 2); for (i = 0; i < sizeof(sds_config_10p3125g_cmu_type1) / sizeof(sds_config); ++i) { rtl931x_write_sds_phy(evenSds, sds_config_10p3125g_cmu_type1[i].page - 0x4, sds_config_10p3125g_cmu_type1[i].reg, sds_config_10p3125g_cmu_type1[i].data); } rtl9310_sds_field_w(asds, 0x6, 0x2, 12, 12, 0); } else { rtl9310_sds_field_w(asds, 0x2e, 0xd, 6, 0, 0x0); rtl9310_sds_field_w(asds, 0x2e, 0xd, 7, 7, 0x1); rtl9310_sds_field_w(asds, 0x2e, 0x1c, 5, 0, 0x1E); rtl9310_sds_field_w(asds, 0x2e, 0x1d, 11, 0, 0x00); rtl9310_sds_field_w(asds, 0x2e, 0x1f, 11, 0, 0x00); rtl9310_sds_field_w(asds, 0x2f, 0x0, 11, 0, 0x00); rtl9310_sds_field_w(asds, 0x2f, 0x1, 11, 0, 0x00); rtl9310_sds_field_w(asds, 0x2e, 0xf, 12, 6, 0x7F); rtl931x_write_sds_phy(asds, 0x2f, 0x12, 0xaaa); rtl931x_sds_rx_rst(sds); rtl931x_write_sds_phy(asds, 0x7, 0x10, op_code); rtl931x_write_sds_phy(asds, 0x6, 0x1d, 0x0480); rtl931x_write_sds_phy(asds, 0x6, 0xe, 0x0400); } break; case PHY_INTERFACE_MODE_10GBASER: /* MII_10GR / MII_10GR1000BX_AUTO: */ /* configure 10GR fiber mode=1 */ rtl9310_sds_field_w(asds, 0x1f, 0xb, 1, 1, 1); /* init fiber_1g */ rtl9310_sds_field_w(dSds, 0x3, 0x13, 15, 14, 0); rtl9310_sds_field_w(dSds, 0x2, 0x0, 12, 12, 1); rtl9310_sds_field_w(dSds, 0x2, 0x0, 6, 6, 1); rtl9310_sds_field_w(dSds, 0x2, 0x0, 13, 13, 0); /* init auto */ rtl9310_sds_field_w(asds, 0x1f, 13, 15, 0, 0x109e); rtl9310_sds_field_w(asds, 0x1f, 0x6, 14, 10, 0x8); rtl9310_sds_field_w(asds, 0x1f, 0x7, 10, 4, 0x7f); break; case PHY_INTERFACE_MODE_HSGMII: rtl9310_sds_field_w(dSds, 0x1, 0x14, 8, 8, 1); break; case PHY_INTERFACE_MODE_1000BASEX: /* MII_1000BX_FIBER */ rtl9310_sds_field_w(dSds, 0x3, 0x13, 15, 14, 0); rtl9310_sds_field_w(dSds, 0x2, 0x0, 12, 12, 1); rtl9310_sds_field_w(dSds, 0x2, 0x0, 6, 6, 1); rtl9310_sds_field_w(dSds, 0x2, 0x0, 13, 13, 0); break; case PHY_INTERFACE_MODE_SGMII: rtl9310_sds_field_w(asds, 0x24, 0x9, 15, 15, 0); break; case PHY_INTERFACE_MODE_2500BASEX: rtl9310_sds_field_w(dSds, 0x1, 0x14, 8, 8, 1); break; case PHY_INTERFACE_MODE_QSGMII: default: pr_info("%s: PHY mode %s not supported by SerDes %d\n", __func__, phy_modes(mode), sds); return; } rtl931x_cmu_type_set(asds, mode, chiptype); if (sds >= 2 && sds <= 13) { if (chiptype) rtl931x_write_sds_phy(asds, 0x2E, 0x1, board_sds_tx_type1[sds - 2]); else { val = 0xa0000; sw_w32(val, RTL931X_CHIP_INFO_ADDR); val = sw_r32(RTL931X_CHIP_INFO_ADDR); if (val & BIT(28)) /* consider 9311 etc. RTL9313_CHIP_ID == HWP_CHIP_ID(unit)) */ { rtl931x_write_sds_phy(asds, 0x2E, 0x1, board_sds_tx2[sds - 2]); } else { rtl931x_write_sds_phy(asds, 0x2E, 0x1, board_sds_tx[sds - 2]); } val = 0; sw_w32(val, RTL931X_CHIP_INFO_ADDR); } } val = ori & ~BIT(sds); sw_w32(val, RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR); pr_debug("%s: RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR 0x%08X\n", __func__, sw_r32(RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR)); if (mode == PHY_INTERFACE_MODE_XGMII || mode == PHY_INTERFACE_MODE_QSGMII || mode == PHY_INTERFACE_MODE_HSGMII || mode == PHY_INTERFACE_MODE_SGMII || mode == PHY_INTERFACE_MODE_USXGMII) { if (mode == PHY_INTERFACE_MODE_XGMII) rtl931x_sds_mii_mode_set(sds, mode); else rtl931x_sds_fiber_mode_set(sds, mode); } } int rtl931x_sds_cmu_band_set(int sds, bool enable, u32 band, phy_interface_t mode) { u32 asds; int page = rtl931x_sds_cmu_page_get(mode); sds -= (sds % 2); sds = sds & ~1; asds = rtl931x_get_analog_sds(sds); page += 1; if (enable) { rtl9310_sds_field_w(asds, page, 0x7, 13, 13, 0); rtl9310_sds_field_w(asds, page, 0x7, 11, 11, 0); } else { rtl9310_sds_field_w(asds, page, 0x7, 13, 13, 0); rtl9310_sds_field_w(asds, page, 0x7, 11, 11, 0); } rtl9310_sds_field_w(asds, page, 0x7, 4, 0, band); rtl931x_sds_rst(sds); return 0; } int rtl931x_sds_cmu_band_get(int sds, phy_interface_t mode) { int page = rtl931x_sds_cmu_page_get(mode); u32 asds, band; sds -= (sds % 2); asds = rtl931x_get_analog_sds(sds); page += 1; rtl931x_write_sds_phy(asds, 0x1f, 0x02, 73); rtl9310_sds_field_w(asds, page, 0x5, 15, 15, 1); band = rtl9310_sds_field_r(asds, 0x1f, 0x15, 8, 3); pr_info("%s band is: %d\n", __func__, band); return band; } int rtl931x_link_sts_get(u32 sds) { u32 sts, sts1, latch_sts, latch_sts1; if (0){ u32 xsg_sdsid_0, xsg_sdsid_1; xsg_sdsid_0 = sds < 2 ? sds : (sds - 1) * 2; xsg_sdsid_1 = xsg_sdsid_0 + 1; sts = rtl9310_sds_field_r(xsg_sdsid_0, 0x1, 29, 8, 0); sts1 = rtl9310_sds_field_r(xsg_sdsid_1, 0x1, 29, 8, 0); latch_sts = rtl9310_sds_field_r(xsg_sdsid_0, 0x1, 30, 8, 0); latch_sts1 = rtl9310_sds_field_r(xsg_sdsid_1, 0x1, 30, 8, 0); } else { u32 asds, dsds; asds = rtl931x_get_analog_sds(sds); sts = rtl9310_sds_field_r(asds, 0x5, 0, 12, 12); latch_sts = rtl9310_sds_field_r(asds, 0x4, 1, 2, 2); dsds = sds < 2 ? sds : (sds - 1) * 2; latch_sts1 = rtl9310_sds_field_r(dsds, 0x2, 1, 2, 2); sts1 = rtl9310_sds_field_r(dsds, 0x2, 1, 2, 2); } pr_info("%s: serdes %d sts %d, sts1 %d, latch_sts %d, latch_sts1 %d\n", __func__, sds, sts, sts1, latch_sts, latch_sts1); return sts1; } static int rtl8214fc_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) { struct phy_device *phydev = upstream; rtl8214fc_media_set(phydev, true); return 0; } static void rtl8214fc_sfp_remove(void *upstream) { struct phy_device *phydev = upstream; rtl8214fc_media_set(phydev, false); } static const struct sfp_upstream_ops rtl8214fc_sfp_ops = { .attach = phy_sfp_attach, .detach = phy_sfp_detach, .module_insert = rtl8214fc_sfp_insert, .module_remove = rtl8214fc_sfp_remove, }; static int rtl8214fc_phy_probe(struct phy_device *phydev) { struct device *dev = &phydev->mdio.dev; int addr = phydev->mdio.addr; int ret = 0; /* 839x has internal SerDes */ if (soc_info.id == 0x8393) return -ENODEV; /* All base addresses of the PHYs start at multiples of 8 */ devm_phy_package_join(dev, phydev, addr & (~7), sizeof(struct rtl83xx_shared_private)); if (!(addr % 8)) { struct rtl83xx_shared_private *shared = phydev->shared->priv; shared->name = "RTL8214FC"; /* Configuration must be done while patching still possible */ ret = rtl8380_configure_rtl8214fc(phydev); if (ret) return ret; } return phy_sfp_probe(phydev, &rtl8214fc_sfp_ops); } static int rtl8214c_phy_probe(struct phy_device *phydev) { struct device *dev = &phydev->mdio.dev; int addr = phydev->mdio.addr; /* All base addresses of the PHYs start at multiples of 8 */ devm_phy_package_join(dev, phydev, addr & (~7), sizeof(struct rtl83xx_shared_private)); if (!(addr % 8)) { struct rtl83xx_shared_private *shared = phydev->shared->priv; shared->name = "RTL8214C"; /* Configuration must be done whil patching still possible */ return rtl8380_configure_rtl8214c(phydev); } return 0; } static int rtl8218b_ext_phy_probe(struct phy_device *phydev) { struct device *dev = &phydev->mdio.dev; int addr = phydev->mdio.addr; /* All base addresses of the PHYs start at multiples of 8 */ devm_phy_package_join(dev, phydev, addr & (~7), sizeof(struct rtl83xx_shared_private)); if (!(addr % 8)) { struct rtl83xx_shared_private *shared = phydev->shared->priv; shared->name = "RTL8218B (external)"; if (soc_info.family == RTL8380_FAMILY_ID) { /* Configuration must be done while patching still possible */ return rtl8380_configure_ext_rtl8218b(phydev); } } return 0; } static int rtl8218b_int_phy_probe(struct phy_device *phydev) { struct device *dev = &phydev->mdio.dev; int addr = phydev->mdio.addr; if (soc_info.family != RTL8380_FAMILY_ID) return -ENODEV; if (addr >= 24) return -ENODEV; pr_debug("%s: id: %d\n", __func__, addr); /* All base addresses of the PHYs start at multiples of 8 */ devm_phy_package_join(dev, phydev, addr & (~7), sizeof(struct rtl83xx_shared_private)); if (!(addr % 8)) { struct rtl83xx_shared_private *shared = phydev->shared->priv; shared->name = "RTL8218B (internal)"; /* Configuration must be done while patching still possible */ return rtl8380_configure_int_rtl8218b(phydev); } return 0; } static int rtl8218d_phy_probe(struct phy_device *phydev) { struct device *dev = &phydev->mdio.dev; int addr = phydev->mdio.addr; pr_debug("%s: id: %d\n", __func__, addr); /* All base addresses of the PHYs start at multiples of 8 */ devm_phy_package_join(dev, phydev, addr & (~7), sizeof(struct rtl83xx_shared_private)); /* All base addresses of the PHYs start at multiples of 8 */ if (!(addr % 8)) { struct rtl83xx_shared_private *shared = phydev->shared->priv; shared->name = "RTL8218D"; /* Configuration must be done while patching still possible */ /* TODO: return configure_rtl8218d(phydev); */ } return 0; } static int rtl838x_serdes_probe(struct phy_device *phydev) { int addr = phydev->mdio.addr; if (soc_info.family != RTL8380_FAMILY_ID) return -ENODEV; if (addr < 24) return -ENODEV; /* On the RTL8380M, PHYs 24-27 connect to the internal SerDes */ if (soc_info.id == 0x8380) { if (addr == 24) return rtl8380_configure_serdes(phydev); return 0; } return -ENODEV; } static int rtl8393_serdes_probe(struct phy_device *phydev) { int addr = phydev->mdio.addr; pr_info("%s: id: %d\n", __func__, addr); if (soc_info.family != RTL8390_FAMILY_ID) return -ENODEV; if (addr < 24) return -ENODEV; return rtl8390_configure_serdes(phydev); } static int rtl8390_serdes_probe(struct phy_device *phydev) { int addr = phydev->mdio.addr; if (soc_info.family != RTL8390_FAMILY_ID) return -ENODEV; if (addr < 24) return -ENODEV; return rtl8390_configure_generic(phydev); } static int rtl9300_serdes_probe(struct phy_device *phydev) { if (soc_info.family != RTL9300_FAMILY_ID) return -ENODEV; phydev_info(phydev, "Detected internal RTL9300 Serdes\n"); return rtl9300_configure_serdes(phydev); } static struct phy_driver rtl83xx_phy_driver[] = { { PHY_ID_MATCH_MODEL(PHY_ID_RTL8214C), .name = "Realtek RTL8214C", .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_REALTEK_PAGES, .match_phy_device = rtl8214c_match_phy_device, .probe = rtl8214c_phy_probe, .suspend = genphy_suspend, .resume = genphy_resume, .set_loopback = genphy_loopback, }, { PHY_ID_MATCH_MODEL(PHY_ID_RTL8214FC), .name = "Realtek RTL8214FC", .features = PHY_GBIT_FIBRE_FEATURES, .flags = PHY_HAS_REALTEK_PAGES, .match_phy_device = rtl8214fc_match_phy_device, .probe = rtl8214fc_phy_probe, .suspend = rtl8214fc_suspend, .resume = rtl8214fc_resume, .set_loopback = genphy_loopback, .set_port = rtl8214fc_set_port, .get_port = rtl8214fc_get_port, .set_eee = rtl8214fc_set_eee, .get_eee = rtl8214fc_get_eee, }, { PHY_ID_MATCH_MODEL(PHY_ID_RTL8218B_E), .name = "Realtek RTL8218B (external)", .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_REALTEK_PAGES, .match_phy_device = rtl8218b_ext_match_phy_device, .probe = rtl8218b_ext_phy_probe, .suspend = genphy_suspend, .resume = genphy_resume, .set_loopback = genphy_loopback, .set_eee = rtl8218b_set_eee, .get_eee = rtl8218b_get_eee, }, { PHY_ID_MATCH_MODEL(PHY_ID_RTL8218D), .name = "REALTEK RTL8218D", .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_REALTEK_PAGES, .probe = rtl8218d_phy_probe, .suspend = genphy_suspend, .resume = genphy_resume, .set_loopback = genphy_loopback, .set_eee = rtl8218d_set_eee, .get_eee = rtl8218d_get_eee, }, { PHY_ID_MATCH_MODEL(PHY_ID_RTL8221B), .name = "REALTEK RTL8221B", .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_REALTEK_PAGES, .suspend = genphy_suspend, .resume = genphy_resume, .set_loopback = genphy_loopback, .read_page = rtl8226_read_page, .write_page = rtl8226_write_page, .read_status = rtl8226_read_status, .config_aneg = rtl8226_config_aneg, .set_eee = rtl8226_set_eee, .get_eee = rtl8226_get_eee, }, { PHY_ID_MATCH_MODEL(PHY_ID_RTL8226), .name = "REALTEK RTL8226", .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_REALTEK_PAGES, .suspend = genphy_suspend, .resume = genphy_resume, .set_loopback = genphy_loopback, .read_page = rtl8226_read_page, .write_page = rtl8226_write_page, .read_status = rtl8226_read_status, .config_aneg = rtl8226_config_aneg, .set_eee = rtl8226_set_eee, .get_eee = rtl8226_get_eee, }, { PHY_ID_MATCH_MODEL(PHY_ID_RTL8218B_I), .name = "Realtek RTL8218B (internal)", .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_REALTEK_PAGES, .probe = rtl8218b_int_phy_probe, .suspend = genphy_suspend, .resume = genphy_resume, .set_loopback = genphy_loopback, .set_eee = rtl8218b_set_eee, .get_eee = rtl8218b_get_eee, }, { PHY_ID_MATCH_MODEL(PHY_ID_RTL8218B_I), .name = "Realtek RTL8380 SERDES", .features = PHY_GBIT_FIBRE_FEATURES, .flags = PHY_HAS_REALTEK_PAGES, .probe = rtl838x_serdes_probe, .suspend = genphy_suspend, .resume = genphy_resume, .set_loopback = genphy_loopback, .read_status = rtl8380_read_status, }, { PHY_ID_MATCH_MODEL(PHY_ID_RTL8393_I), .name = "Realtek RTL8393 SERDES", .features = PHY_GBIT_FIBRE_FEATURES, .flags = PHY_HAS_REALTEK_PAGES, .probe = rtl8393_serdes_probe, .suspend = genphy_suspend, .resume = genphy_resume, .set_loopback = genphy_loopback, .read_status = rtl8393_read_status, }, { PHY_ID_MATCH_MODEL(PHY_ID_RTL8390_GENERIC), .name = "Realtek RTL8390 Generic", .features = PHY_GBIT_FIBRE_FEATURES, .flags = PHY_HAS_REALTEK_PAGES, .probe = rtl8390_serdes_probe, .suspend = genphy_suspend, .resume = genphy_resume, .set_loopback = genphy_loopback, }, { PHY_ID_MATCH_MODEL(PHY_ID_RTL9300_I), .name = "REALTEK RTL9300 SERDES", .features = PHY_GBIT_FIBRE_FEATURES, .flags = PHY_HAS_REALTEK_PAGES, .probe = rtl9300_serdes_probe, .suspend = genphy_suspend, .resume = genphy_resume, .set_loopback = genphy_loopback, .read_status = rtl9300_read_status, }, }; module_phy_driver(rtl83xx_phy_driver); static struct mdio_device_id __maybe_unused rtl83xx_tbl[] = { { PHY_ID_MATCH_MODEL(PHY_ID_RTL8214FC) }, { } }; MODULE_DEVICE_TABLE(mdio, rtl83xx_tbl); MODULE_AUTHOR("B. Koblitz"); MODULE_DESCRIPTION("RTL83xx PHY driver"); MODULE_LICENSE("GPL");