From 7b01a3d451734b9db47a7818ade3befc2fcb6a12 Mon Sep 17 00:00:00 2001 From: Phil Elwell Date: Thu, 16 Nov 2023 16:03:47 +0000 Subject: [PATCH 0824/1085] ARM: dts: bcm2712: Prune the non-D0 hardware There is no point describing hardware blocks in C0/1 that aren't also in D0, so delete them. Signed-off-by: Phil Elwell --- .../arm/boot/dts/broadcom/bcm2712-rpi-5-b.dts | 2 - arch/arm/boot/dts/broadcom/bcm2712.dtsi | 66 ------------------- 2 files changed, 68 deletions(-) --- a/arch/arm/boot/dts/broadcom/bcm2712-rpi-5-b.dts +++ b/arch/arm/boot/dts/broadcom/bcm2712-rpi-5-b.dts @@ -24,8 +24,6 @@ #define spi6 _spi6 #define uart0 _uart0 #define uart2 _uart2 -#define uart3 _uart3 -#define uart4 _uart4 #define uart5 _uart5 #include "bcm2712.dtsi" --- a/arch/arm/boot/dts/broadcom/bcm2712.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm2712.dtsi @@ -197,28 +197,6 @@ status = "disabled"; }; - uart3: serial@7d001600 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x7d001600 0x200>; - interrupts = ; - clocks = <&clk_uart>, - <&clk_vpu>; - clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; - status = "disabled"; - }; - - uart4: serial@7d001800 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x7d001800 0x200>; - interrupts = ; - clocks = <&clk_uart>, - <&clk_vpu>; - clock-names = "uartclk", "apb_pclk"; - arm,primecell-periphid = <0x00241011>; - status = "disabled"; - }; - uart5: serial@7d001a00 { compatible = "arm,pl011", "arm,primecell"; reg = <0x7d001a00 0x200>; @@ -543,17 +521,6 @@ status = "disabled"; }; - uartc: serial@7d50e000 { - compatible = "brcm,bcm7271-uart"; - reg = <0x7d50e000 0x20>; - reg-names = "uart"; - reg-shift = <2>; - reg-io-width = <4>; - interrupts = ; - skip-init; - status = "disabled"; - }; - aon_intr: interrupt-controller@7d510600 { compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc"; reg = <0x7d510600 0x30>; @@ -1103,30 +1070,6 @@ brcm,msi-pci-addr = <0xff 0xffffe000>; }; - genet: ethernet@1300000 { - compatible = "brcm,bcm2711-genet-v5"; - reg = <0x10 0x01300000 0x0 0x20010>; - #address-cells = <0x1>; - #size-cells = <0x0>; - interrupts = , - ; - status = "disabled"; - phy-mode = "rgmii"; - fixed-link = <0x0 0x1 0x3e8 0x0 0x0>; - phy-speed = <0x3e8>; - phy-id = <0x101>; - phy-type = <0x6>; - local-mac-address = [ 00 10 18 d8 45 de ]; - device_type = "network"; - - genet_mdio: mdio@e14 { - compatible = "brcm,genet-mdio-v5"; - reg = <0xe14 0x8>; - #address-cells = <0x1>; - #size-cells = <0x0>; - }; - }; - syscon_piarbctl: syscon@400018 { compatible = "brcm,syscon-piarbctl", "syscon", "simple-mfd"; reg = <0x10 0x00400018 0x0 0x18>; @@ -1188,15 +1131,6 @@ mmc-ddr-3_3v; status = "disabled"; }; - - sdio0: mmc@1108000 { - compatible = "brcm,bcm2711-emmc2"; - reg = <0x10 0x01108000 0x0 0x100>; - interrupts = ; - clocks = <&clk_emmc2>; - mmc-ddr-3_3v; - status = "disabled"; - }; bcm_reset: reset-controller@1504318 { compatible = "brcm,brcmstb-reset";