// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "mt7628an.dtsi" #include #include #include / { compatible = "tplink,tl-wr841n-v14", "mediatek,mt7628an-soc"; model = "TP-Link TL-WR841N v14"; aliases { led-boot = &led_wlan; led-failsafe = &led_wlan; led-upgrade = &led_wlan; }; chosen { bootargs = "console=ttyS0,115200"; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 38 GPIO_ACTIVE_LOW>; linux,code = ; }; }; leds { compatible = "gpio-leds"; lan { function = LED_FUNCTION_LAN; color = ; gpios = <&gpio 39 GPIO_ACTIVE_LOW>; }; wan_green { function = LED_FUNCTION_WAN; color = ; gpios = <&gpio 40 GPIO_ACTIVE_LOW>; }; led_wlan: wlan { function = LED_FUNCTION_WLAN; color = ; gpios = <&gpio 41 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; wan_orange { function = LED_FUNCTION_WAN; color = ; gpios = <&gpio 42 GPIO_ACTIVE_LOW>; }; }; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "boot"; reg = <0x0 0x10000>; read-only; }; partition@10000 { compatible = "tplink,firmware"; label = "firmware"; reg = <0x10000 0x3e0000>; }; factory: partition@3f0000 { label = "factory"; reg = <0x3f0000 0x10000>; read-only; nvmem-layout { compatible = "fixed-layout"; #address-cells = <1>; #size-cells = <1>; eeprom_factory_0: eeprom@0 { reg = <0x0 0x400>; }; macaddr_factory_f100: macaddr@f100 { reg = <0xf100 0x6>; }; }; }; }; }; }; &ehci { status = "disabled"; }; &ohci { status = "disabled"; }; &wmac { status = "okay"; nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_f100>; nvmem-cell-names = "eeprom", "mac-address"; }; ðernet { nvmem-cells = <&macaddr_factory_f100>; nvmem-cell-names = "mac-address"; }; &esw { mediatek,portmap = <0x3e>; }; &state_default { gpio { groups = "p4led_an", "p3led_an", "p2led_an", "p1led_an", "p0led_an", "wdt"; function = "gpio"; }; }; &gpio { led_wlan_enable { gpio-hog; gpios = <43 GPIO_ACTIVE_HIGH>; output-high; }; };